What does it mean when the subject two appointment shows 'training not attended'?

1 Answers
DiMatteo
07/30/25 3:03am
Subject two appointment shows 'training not attended' because the required class hours have not been completed. Below is the relevant information: Conditions for scheduling the exam: Applicants for driving instruction must complete the corresponding class hours for subjects one, two, and three before they can schedule the exam. Subject one requires 12 class hours, subject two requires 16 class hours, subject three requires at least 300 kilometers of road driving training and 24 class hours, and subject four (safety and civilized driving) requires 10 class hours. Each class hour is 60 minutes, with a minimum effective duration of 45 minutes. Sequential examination: The exams proceed in the order of subject one, subject two, subject three, and subject four. In the subject three examination items, the new regulations place greater emphasis on the driver's awareness of safety and civility.
Was this review help?
7
1
Share
More Forum Discussions

How to reset the maintenance light on BAIC Senova D50?

While the engine is running, switch the display to the short-distance odometer "A". Turn off the engine switch, and when pressing the short-distance odometer reset button, switch the engine switch to the "ON" position. Continue holding the switch until the short-distance odometer displays "000000".
2
4
Share

What is the weight of an ordinary car?

Different models of ordinary cars have different weights and quality. Generally, family economy cars with a displacement of 1.1 to 1.6L have a total body weight of about 1.1 to 1.4 tons. Car weight parameters: The curb weight of a car, also commonly referred to as the "empty weight" in the past. Car function introduction: Cars have parameters such as displacement, engine power, maximum power, maximum torque, combustion chamber, and compression ratio. Displacement: Cylinder displacement refers to the volume of gas swept by the piston from top dead center to bottom dead center, which depends on the cylinder bore and piston stroke. Engine power: Generally expressed in horsepower or kilowatts. Maximum power: Indicates engine performance; generally, the larger the displacement, the higher the engine's maximum power. Maximum torque: Torque refers to the average force output from the crankshaft during engine operation, equivalent to the engine's turning force. Combustion chamber: The space between the cylinder head and the top surface of the piston is called the combustion chamber. Compression ratio: Refers to the ratio of the total cylinder volume to the combustion chamber volume, indicating the degree of mixture compression when the piston reaches top dead center.
16
3
Share

How to Remove the Radio in Changan Yuexiang V3?

Pull the air conditioning vent above towards yourself to see the fixing screws. First remove the frame, and there are two screws underneath that you can feel with your hand. After removing the frame, you can see the screws on both sides of the radio. Remove these screws to pull out the radio.
1
5
Share

What to do if the one-touch window function of Audi A6L is not working?

First, try raising the malfunctioning window to the topmost position, then continue holding the button for 5 seconds to restore its functionality. If it still doesn't work, it indicates the button is damaged and requires inspection and repair at a 4S shop or professional repair shop.
7
3
Share

How to Replace the Cabin Air Filter on a Soueast DX7

Press inward from the middle of the filter, and the lower corner will come out, then pull it out. Utilize the position of the blower, press the filter against the upper position, then apply force to the lower position. Press the middle of the upper and lower sections into a fan shape, then you can install the new filter.
19
2
Share

How to Turn Off After Pressing the One-Button Start to Power On?

Power on - Turn on the system - Start the engine (requires pressing the brake pedal) - Power off. If the power is still on when the engine is off, it means the gear lever has not been moved to the P position; you need to move it to P and then press the start button once more.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.