What does it mean when the study hours for Subject 2 have not been reviewed?

1 Answers
VanGriffin
07/30/25 8:02am
Subject 2 study hours not being reviewed means that the required study hours for Subject 2 have not been completed. Below is relevant information about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination and refers to the field driving skills test. 2. Subject 2 test items for small vehicles C1 and C2: Include reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves) as five mandatory test items (some regions also include a sixth item, high-speed card collection). 3. Subject 2 test items for large vehicles A1, A2, A3, B1, and B2: Include stake test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, driving through curves, turning at a right angle, passing through a width-restricted gate, passing through continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulating highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) weather, slippery roads, and emergency handling.
Was this review help?
16
5
Share
More Forum Discussions

Is it necessary to apply film to the car's front windshield?

Applying film to the car's front windshield is necessary. The benefits of applying film to the front windshield include: 1. Heat insulation and sun protection - the film can block the heat generated by infrared rays; 2. Safety and explosion-proof - the base layer of the film is made of polyester, which has strong tear resistance and penetration prevention functions. After applying the film, the strength of the glass can prevent injuries to the driver and passengers caused by accidental glass breakage; 3. Reduced air conditioning energy consumption - the loss of cooling capacity due to heat insulation film can be compensated, achieving a certain degree of energy savings. After applying the film, car owners should pay attention to: 1. Do not use solutions containing alcohol or ammonia to clean the surface of the film; 2. Avoid directing the air conditioning airflow directly at the film to prevent severe thermal expansion and contraction; 3. After applying the film, it takes about a month for the front and rear films to completely dry, so during the day, try to position the front of the car towards the sunlight.
20
2
Share

How to Remove the Maintenance Reminder on the Boyue?

Here is the method to eliminate the maintenance reminder for the Boyue: 1. Press the top of the turn signal to activate the instrument panel buttons. 2. Use the volume knob to scroll up and down to the trip mileage setting and stop there. 3. Press the MODE button to enter the submenu, find the maintenance mileage option, press MODE again to enter, then use the volume button to move to the reset option, and press MODE to confirm the reset. Here is some related information: 1. To cancel the maintenance reminder on the Geely Boyue, a computer operation is required. 2. The original intention of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should go to the 4S store for maintenance promptly. After the maintenance is completed, the 4S store will reset the maintenance light using a fault diagnostic tool. The quickest and most accurate way to eliminate the maintenance reminder light is to use a fault diagnostic tool. Generally, car owners do not have such equipment, so it is recommended to have the reminder light reset at the 4S store after maintenance or at an external 4S store.
18
4
Share

When Should the Crawl Control System Be Used?

Crawl control system is primarily used when climbing steep slopes or driving on special road conditions such as rain and snow-covered roads, rocky paths, and sandy terrain. It automatically controls the engine and brakes, maintaining low-speed driving to achieve excellent and stable off-road capability. Here are some relevant details: 1. The Crawl Control (CRAWL-Control) system, officially known as the 'Low-Speed Cruise Driving Assist System,' can be simply understood as: the vehicle independently controls engine torque output, the transmission system, and the braking system, allowing the vehicle to pass through rough terrain at an extremely slow speed. Its main purpose is to prevent wheel slippage or getting stuck due to excessive speed. In other words, this crawl system does not require the driver to manually operate the vehicle. Instead, it uses a computer system to autonomously control the vehicle, adjusting torque output and distributing braking force to all four wheels based on road conditions, thereby achieving wheel slip limitation. 2. Different automakers have varying names for systems with such functionality. For example, Land Rover refers to it as the All-Terrain Progress Control system, though their core functions are largely similar.
18
2
Share

What is the Toyota Phoenix emblem car?

Toyota Phoenix emblem refers to the Toyota Century. It is a luxury sedan developed to commemorate the founder of Toyota Motor Corporation, Sakichi Toyoda, and was first introduced in 1967 as the most premium product under the Toyota brand. Below are some key details about the Toyota Century: 1. The Toyota Century features a boxy exterior design with an overall stately and dignified appearance. The front grille adopts a polygonal hollowed-out design, with a hand-carved golden phoenix logo exclusive to the Century model at its center. The rear end follows traditional styling, featuring flat and square-shaped taillight clusters composed of three square light sources. Above the flat trunk lid is the "CENTURY" lettering, with the signature golden phoenix logo naturally positioned between the taillights. 2. The interior showcases understated Japanese luxury, presented in an overall gray color scheme. The center console area, apart from physical buttons for audio and climate control, houses a modestly sized touchscreen. The driver's functional zone is devoid of any flashy designs, with components such as the instrument panel, steering wheel, pedals, and gear lever serving purely functional purposes rather than visual appeal.
1
1
Share

Where is the cabin air filter located in a Beetle?

The cabin air filter in a Beetle is located beneath the glove compartment on the passenger side, secured by two screws. After removing the screws, take off the soft sponge panel to reveal the filter. There are two types of cabin air filters available: one without activated carbon and another with activated carbon. The recommended replacement interval for the cabin air filter is generally every 10,000 kilometers. The functions of the cabin air filter are as follows: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air. 4. It prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers, thus enhancing driving safety. It provides fresh air to the cabin, preventing the inhalation of harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes. 5. It maintains clean air in the cabin, preventing bacterial growth and creating a healthy environment. It effectively separates solid impurities such as dust, pollen, and abrasive particles from the air.
1
3
Share

How to Shift from D to S Gear in an Automatic Transmission?

Shifting between D and S gears is not affected by vehicle speed or road conditions, nor does it require braking, and can be done at any time. Here is relevant information: 1. The automatic transmission D/S typically represents the shift between D and S gears. The so-called D gear is the drive gear, an abbreviation of the English word 'Drive'. When the gear lever is moved to this position, the transmission automatically shifts up or down within the engine speed range, with the shift point depending on engine load, the driver's driving style, and vehicle speed. 2. The S gear is the sport mode of the D gear, offering more powerful output. In sport mode, the transmission can shift freely, but shifting is delayed, keeping the engine at high speeds for a longer time, thereby increasing vehicle power. 3. The D gear is the most commonly used driving position. It's important to note that since the automatic transmission determines the gear based on throttle size and vehicle speed, the method of operating the accelerator pedal affects the shifting speed. If the accelerator pedal is pressed quickly at startup, upshifting is delayed, enhancing acceleration capability. Once a certain speed is reached, quickly releasing the accelerator pedal allows the car to upshift immediately, resulting in reduced engine noise and improved comfort.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.