What does it mean when the snowflake light on the car dashboard is on?

1 Answers
MacAriel
07/29/25 4:33pm
The reasons for the snowflake light on the car dashboard being illuminated are: 1. The outdoor temperature is too low; 2. The outdoor temperature sensor is damaged; 3. There is a signal transmission error. The dashboard indicator lights and their functions are as follows: 1. Engine fault light: Indicates an engine fault; 2. Battery indicator light: Indicates the battery is depleted or there is a generator fault; 3. Oil warning light: Indicates insufficient oil; 4. Water temperature warning light: Indicates the water temperature is too high; 5. Tire pressure warning light: Indicates abnormal tire pressure; 6. ABS fault warning light: Indicates a fault in the anti-lock braking system; 7. Antifreeze warning light: Indicates a lack of antifreeze; 8. Door not closed warning light: Indicates a door is not properly closed; 9. Brake fluid warning light: Indicates insufficient brake fluid in the reservoir.
Was this review help?
16
4
Share
More Forum Discussions

What Causes a Dash Cam to Flash On and Off?

The flashing of a dash cam is due to unstable voltage. Solution: First, remove the SD card or TF card and press the power button to check if it can turn on. If it still doesn't turn on, look for the "RESET" hole on the side of the device and gently press it with a soft object. Then, press the power button again to see if it starts up. If the dash cam boots normally, it indicates a problem with the card, which can be resolved by formatting it. After formatting the card and reinserting it, if the issue persists, it is recommended to replace the memory card. Precautions: The dash cam should be installed near the rearview mirror inside the car. This placement ensures it doesn't obstruct the driver's view, and even during rainy or snowy weather when the wipers are in motion, it won't affect the normal recording of footage. Most importantly, regularly check the dash cam's mounting, as poor fixation can easily lead to failure in capturing crucial footage.
17
3
Share

What does it mean when the car's faucet-shaped yellow light is on?

When the car's faucet-shaped yellow light is on, it indicates that the engine (exhaust system) malfunction indicator light is illuminated. Below is relevant information about the car's faucet-shaped yellow light being on: 1. Different scenarios of the car's faucet-shaped yellow light being on: If the faucet-shaped light turns off a few seconds after starting the engine, this is a normal system self-check. If this yellow faucet-shaped light remains steadily lit, it may indicate a fault in the exhaust system. If the light flashes intermittently, it suggests engine misfire or catalytic converter damage. 2. Reasons for the car's faucet-shaped yellow light being on: Main causes include poor fuel quality not meeting standards, spark plug carbon buildup, oxygen sensor malfunction, engine knocking, damaged coolant temperature sensor, or engine cylinder misfire. 3. How to respond when the car's faucet-shaped yellow light is on: If the car's coolant temperature gauge and oil pressure warning light haven't activated, the vehicle can still be driven but must proceed with caution at reduced speed, seeking the nearest auto repair shop for inspection. If the coolant temperature is too high or the oil pressure warning light also illuminates, and obvious vehicle malfunction is detected, immediately pull over and request roadside assistance.
17
3
Share

What is a safety hammer used for?

It is mainly used to smash glass for escape in emergency situations such as fires or car submersion, with the blade at the end of the handle used to cut seat belts for escape. Currently, bus window glass is generally made of high-hardness and high-strength organic glass, which is difficult to break with fists or feet, making it hard for passengers to break the window for escape in emergencies. Therefore, modern buses, especially air-conditioned ones, are usually equipped with 4 to 6 safety hammers on both sides of the compartment. The striking position for the safety hammer is the four corners of the window glass. Below is an introduction to safety hammers: 1. Design concept of safety hammers: The pull-handle safety hammer combines the interior safety pull-handle and escape hammer in its design. In an emergency, pressing a button releases the handle, allowing it to be used as a safety hammer, making it quicker to break the window and increasing the chances of escape. 2. How to operate a safety hammer: Pick up the safety hammer and strike the four corners of the tempered glass, avoiding the center as it is the strongest part. Since some glass has film, it may not fall off immediately after breaking; you can kick it open. Once the glass falls off, exit the vehicle body promptly and in an orderly manner, moving to a safe location.
5
0
Share

What to Do When a Car Reaches Its Scrapping Period?

When a car reaches its scrapping period, the following steps should be taken: 1. Settle all traffic violations and accidents involving the vehicle first. 2. Apply for the vehicle owner to fill out various application forms: The owner should obtain and complete one copy each of the Application Form for Vehicle Modification, Transfer, Alteration, Suspension, and Scrapping Approval, and affix the owner's seal. 3. Apply at the registration acceptance counter: For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. 4. Deliver the car to a recycling company for dismantling. 5. Settle the residual value: After verifying the "Notice," the recycling company will dismantle the vehicle and take photos, and then settle the residual value. 6. Complete the scrapping registration: The owner should submit the "Modification Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed after approval according to regulations. 7. Obtain the scrapped vehicle recycling certificate.
16
0
Share

Is Paint Peeling on a New Car Covered by the Three Guarantees?

Paint peeling caused by scratches is due to human factors and does not constitute a vehicle quality issue, therefore it is not covered under warranty. However, it falls under accidental damage to the vehicle, and you can request the vehicle's insurance company to assess and compensate for the damaged parts. Below is relevant information regarding car warranties: 1. Documentation: You need to bring the vehicle registration certificate, driver's license, and warranty manual. 2. Timeframe: The vehicle must be within the warranty period, which varies for different vehicles. 3. Vehicle Issues: The malfunction must be within the scope specified in the warranty manual, and the warranty periods for different components vary.
3
0
Share

Is the Highway Free on Mid-Autumn Festival?

Normally, highways are not free during the Mid-Autumn Festival. Below are the details of the toll-free periods: 1. Toll-Free Periods: In 2021, toll roads were free during four national statutory holidays—Spring Festival, Qingming Festival, Labor Day, and National Day—as well as the consecutive holidays determined by the State Council. 2. Eligible Vehicles: The toll-free policy applies to passenger vehicles with seven seats or fewer (including seven seats) and motorcycles allowed on regular toll roads.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.