What does it mean when the RVM yellow light is on?

3 Answers
DeMiles
07/29/25 6:08am
When the RVM yellow light is on, it indicates a malfunction in the Rear Vehicle Monitoring System, and you should visit a repair shop to diagnose and fix the issue promptly. The Rear Vehicle Monitoring System provides warnings when changing lanes if there are vehicles in the blind spot behind. It uses radar sensors installed on the rear bumper to detect vehicles in adjacent lanes and measure the distance to vehicles approaching from behind. When a lane change could pose a danger, the system alerts the driver by flashing indicator lights and sounding an alarm. The Rear Vehicle Monitoring System employs 24GHz millimeter-wave radar, which offers a wide detection range and is less affected by adverse weather conditions or sunlight, ensuring high-precision detection of approaching vehicles even at high speeds.
Was this review help?
7
3
Share
BrandonAnn
08/12/25 9:12pm
I noticed the yellow RVM light on the dashboard is illuminated, which usually indicates a fault in the blind spot monitoring system, such as sensors covered by dirt, loose wiring connections, or system calibration deviation. This is no small matter—ignoring it could increase risks when changing lanes since the system can't effectively alert you to vehicles in the blind spot. Having driven for over a decade, my first response in such situations is to pull over and check if the sensor area is dirty. If cleaning doesn’t help, I head to a professional shop as soon as possible to scan for trouble codes. Modern vehicle assist systems are getting smarter but also more delicate, with false alarms more common in harsh weather like rain. Regular maintenance checks can significantly reduce such issues. The cornerstone of safe driving is ensuring all functions operate correctly, addressing problems promptly to prevent minor issues from escalating into major accidents. Remember, don’t attempt DIY fixes—leave it to the experts for efficiency and peace of mind.
Was this review help?
11
5
Share
Expand All
Vieira
10/04/25 2:13am
Seeing the RVM yellow warning light suddenly pop up on the dashboard while driving is really unsettling. This usually indicates a malfunction in the blind spot monitoring system, likely due to sensor issues or software glitches. I encountered this during a weekend road trip and immediately drove to the dealership for inspection. Turned out it was just leaves stuck in the sensor - the technician cleaned it up for less than a hundred yuan. Having this light on always makes lane changes feel risky, especially on highways or during nighttime with poor visibility. I now maintain regular car cleaning to prevent dust buildup and learned to manually calibrate the system through the settings menu. Never ignore such warnings - it's better to be safe than sorry, as accidents could lead to bigger troubles. A friend suggested keeping emergency tools in the car, but advised against DIY fixes that might worsen the problem.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the wear limit for brake pads?

Brake pad wear limit thickness should not be less than 1.2mm. The methods for determining brake pad wear limits are as follows: Empirical method: If the vehicle has traveled 40,000-50,000 kilometers without brake pad replacement, you can judge by the braking feel when applying the brakes. If the brake pedal feels soft, produces noise, or the braking performance seems less responsive than before, with significantly longer pedal travel compared to when the vehicle was new, it's recommended to check the brake pad thickness in this situation. Vehicle computer method: If the vehicle's brake pad warning signal is connected to the onboard computer, a "Please check brake pads" message will appear on the dashboard or the brake pad wear indicator light will illuminate. Generally, when these warnings appear, it indicates the brake pads have reached their wear limit.
17
5
Share

How to Measure Whether a Compressor is Good or Bad?

To determine the quality of a compressor, it's essential to identify the three terminals on the air conditioning compressor, which are S, R, and C. Here, S stands for the start winding, R for the run winding, and C for the common terminal. Use a multimeter to measure the resistance values. The sum of the resistances between SC and RC should equal the resistance between RS, which indicates normal operation. Below is additional information: 1. Function of the Compressor: The compressor's role is to regulate the start-stop state of the air compressor. By adjusting the pressure inside the air storage tank, it allows the air compressor to shut down for rest, which benefits engine maintenance. 2. Types of Compressors: Compressor types include swash plate compressors, vane compressors, scroll compressors, and reciprocating (crankshaft-connecting rod) compressors.
14
5
Share

How to Fix P0222 Trouble Code?

When the P0222 trouble code appears, it is recommended that the car owner go to a 4S shop for inspection and repair as soon as possible. Possible causes include sensor interface failure, short circuit to ground, sensor failure, or electronic control module (PCM or ECM) failure. P0222 trouble code analysis: 1. Applicability: This OBD trouble code applies to all car manufacturers. 2. Meaning: In the Electronic Throttle Control (ETC) system, the Accelerator Pedal Position (APP) sensor transmits the position of the throttle pedal to the throttle control module in the form of an electrical signal, serving as a reference for the throttle actuator to control the throttle valve opening. This trouble code indicates that the voltage of the throttle pedal position sensor B circuit remains below the calibrated minimum value (0.17 volts) for a set period of time.
4
2
Share

What is the real reputation of the Haval Big Dog?

The real reputation of the Haval Big Dog is quite good, with significant improvements compared to previous models under the new platform. When driven leisurely, the smoothness of the Haval Big Dog provides a comfortable experience. The previous issue of jerky starts has been eliminated, and the engine performs well at low RPMs, with timely power delivery after starting. Below are the pros and cons of the Haval Big Dog: 1. Pros of the Haval Big Dog: The retro exterior design aligns with current trends, and the rugged style appeals to young consumers. Built on the new Lemon platform, it supports gasoline, plug-in hybrid, and pure electric powertrains. Excellent NVH engineering, with a significantly improved chassis tuning compared to before. 2. Cons of the Haval Big Dog: The 1.5T small-displacement engine still struggles at medium to high speeds. The transmission prioritizes smoothness over shift speed. High tire noise, high fuel consumption, and lack of lumbar support.
14
0
Share

How to Check Vehicle Toll Information?

Vehicle entry and exit information on highways can be queried through the highway toll system. When a vehicle enters a highway, the ETC (Electronic Toll Collection) card or the IC card issued by the toll station records relevant information such as the time, location, and vehicle type. Similarly, when the vehicle exits the highway, the ETC card reading system or IC card toll system records the relevant information about the vehicle leaving the highway. Below is additional information: 1. Toll rates: Highway toll rates vary. A four-lane highway charges 0.4 yuan per kilometer, while a six-lane or wider highway charges 0.6 yuan per kilometer. 2. Toll factors: Toll rates are generally determined based on a comprehensive consideration of the following aspects: the total project investment and its composition; professional forecasts of short-, medium-, and long-term traffic flow for the highway; and the proposed approved toll collection period.
4
1
Share

What is the difference between reference price and manufacturer's suggested retail price?

Automobile reference prices are lower than the manufacturer's suggested retail prices, which are set by the manufacturer. It is more appropriate to purchase a car based on the reference price, as the actual transaction price is usually close to the reference price. Specific details are as follows: 1. Manufacturer's Suggested Retail Price (MSRP): The MSRP is the price set by the manufacturer, and in principle, 4S stores are required to sell at this price, which includes the manufacturer's profit beyond the cost. 2. Reference Price: The reference price is a suggested purchase price provided by automotive websites after compiling quotes from various dealers. The websites imply that selling at this price is reasonable. In actual car purchases, you need to negotiate the price with the dealer, and the final ex-factory price may be lower than the reference price. Some popular models may even be sold above the MSRP. Most prices, however, are below the MSRP.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.