What does it mean when the road shows 'emission exceedance'?

1 Answers
VanEvangeline
07/29/25 11:05pm
It means that the vehicle has been detected by some roadside monitoring equipment as exceeding the emission standards. Vehicles with pollutant emissions above the stipulated standards will be ordered to undergo rectification within a specified time limit. Failure to comply with the rectification order within the deadline will result in a 3-point deduction and a fine of 200 yuan. Implementation of China VI emission standards: 1. Phase 1: Starting from July 1, 2020, all vehicles sold and registered must comply with the China VI-A standard. 2. Phase 2: Starting from July 1, 2023, all vehicles sold and registered must comply with the China VI-B standard.
Was this review help?
15
1
Share
More Forum Discussions

Which Volkswagen model has an imported engine?

Volkswagen Beetle's engine is imported. Engine definition: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines usually convert chemical energy into mechanical energy. The engine can refer to both the power generation device and the entire machine including the power device (such as gasoline engines, aircraft engines). Basic engine structure: The engine block is the framework that constitutes the engine and serves as the installation base for various mechanisms and systems of the engine. It houses all major components and accessories of the engine internally and externally, bearing various loads. Therefore, the engine block must have sufficient strength and rigidity. The engine block group mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
1
3
Share

Can an A3 license be upgraded to an A1 license?

A3 cannot be directly upgraded to A1. An A3 license holder must first upgrade to B1 before being eligible for an A1 upgrade. Below are the requirements for license upgrades: Requirements for upgrading to a medium bus driving permit (B1): The original driving license must be C1, C2, C3, or C4 with a driving experience of at least three years, and no record of accumulating 12 penalty points within the past two years. Requirements for upgrading to a tractor driving permit (A2): The original driving license must be B1 or B2 with a driving experience of at least three years, and no record of accumulating 12 penalty points within the past two years. Requirements for upgrading to a large bus driving permit (A1): The original driving license must be B1 or B2 with a driving experience of at least five years, and no record of accumulating 12 penalty points within the past three years. Restrictions on upgrading: Individuals who have caused fatalities in traffic accidents and bear full or primary responsibility are not eligible to apply for upgrading to B1, A1, or A2 driving permits.
1
3
Share

What is the 0-100 km/h acceleration time of the Mercedes-Benz A45S?

The 0-100 km/h acceleration time of the Mercedes-Benz A45S is 3.95 seconds. Definition of 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time taken to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, a 1.6L compact car achieves a 0-100 km/h acceleration time between 11 to 13 seconds, a 2.0T midsize sedan between 7 to 8 seconds, while supercars mostly have acceleration times under 3.8 seconds. Factors affecting test results: Manufacturers usually indicate the official 0-100 km/h acceleration time in the vehicle's promotional materials, but actual test results often differ from the official figures. This is because different environmental temperatures, road conditions, vehicle wear and tear, and even the amount of fuel remaining in the tank can all affect the test results. Therefore, there are no two identical acceleration test results.
7
1
Share

Where are the high and low beams on a Mercedes-Benz?

Mercedes-Benz high and low beam switch is controlled by the light control knob on the left side of the driver's seat. Driving regulations: When meeting another vehicle at night, you should switch to low beams when the oncoming vehicle is more than 150 meters away. When meeting non-motorized vehicles on narrow roads or bridges, you should use low beams. Difference between high and low beams: The difference lies in adjusting the intensity of light based on the distance of the filament. High beams focus light at their focal point, emitting parallel rays that are more concentrated and brighter, capable of illuminating distant and high objects. Low beams focus light beyond their focal point (between 1x and 2x the focal distance), emitting divergent light that illuminates a larger area at close range. Low beams are designed for short-distance illumination (about 30-40 meters), with a wide coverage (160 degrees) and short range, and the focus cannot be adjusted. High beams are designed for long-distance illumination, with greater range and brightness.
17
0
Share

What Size Wiper Blades Are Needed for MG6 Rear Wiper Replacement?

MG6 rear wiper replacement requires wiper blade sizes: main 24 inches (600mm), secondary 18 inches (450mm). Wiper System Introduction: The wiper assembly consists of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. When the wiper switch is pressed, the motor starts, and the motor's speed drives the swing arm through the torque-increasing effect of the worm gear. The swing arm drives the four-bar linkage, which in turn drives the shaft installed on the front bulkhead to swing left and right. Finally, the shaft drives the wiper blade to sweep across the windshield. Precautions for Wiper Replacement: Refer to the vehicle manual to clearly identify the wiper model specified. Pay attention to whether the connection method between the support rod and the wiper arm matches. During testing, place the wiper switch in various speed positions to check if the wiper maintains a consistent speed at different settings. Especially in intermittent operation mode, observe whether the wiper maintains a steady speed during movement.
20
4
Share

What is the fuel consumption of the Chery A3 4AT?

Chery A3 4AT has a fuel consumption of around 7.9-12L per 100 kilometers. Theoretical basis of fuel consumption: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain distance at a specified speed. It is a theoretical indicator of the vehicle. Manufacturers measure this value in an objective environment using a dynamometer installed on the vehicle's chassis, converting it into speed parameters. The theoretical experimental fuel consumption data per 100 kilometers is then calculated at specified speeds. Fuel-saving tips: A car's fuel consumption is not only related to the engine's displacement and the vehicle's weight but also closely linked to the driver's habits. You can reduce fuel consumption by developing good driving habits, regularly checking tire pressure, avoiding aggressive acceleration and braking, maintaining a steady speed, and clearing out unnecessary items stored in the car for long periods.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.