What does it mean when the OBD indicator light is on?

Which gear should the Tayron be in when waiting at a red light?

The Tayron should be in D gear with the brake pedal pressed when the red light duration is less than 30 seconds. If it exceeds 30 seconds, shift to N gear and engage the handbrake. Car gears include: P gear, R gear, N gear, D gear. Related introduction to car gears: P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will remain stationary even without pressing the brake, and it is generally used for long-term parking. When engaging P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always engage the handbrake. When parking on a slope, engage the handbrake first before shifting to P gear. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are in a freewheeling state, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in N gear when the car is being towed. D gear is the driving gear: When the gear lever is in the D gear position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, according to the preset shifting pattern. In most cases, D gear can be used for driving.

16

3

Share

What engine does the SAIC Maxus G20 use?

The Maxus G20 is equipped with a 2.0T turbocharged engine from SAIC's Blue Core series, which is produced by SAIC Motor Corporation. The SAIC Maxus G20 has a maximum horsepower of 224ps, a maximum power output of 165kw, and a maximum torque of 350nm. For the daily maintenance of the SAIC Maxus G20's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate over time during use. After a certain mileage, its performance will degrade, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale deposits not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

4

5

Share

How to Get into a Land Rover Without Feeling Awkward?

=

19

4

Share

What are the differences between a differential lock and a differential?

The differences between a differential lock and a differential are as follows: 1. Different functions: The differential lock locks the machine 100%, while the differential allows a certain differential response. The main function of the differential is to create a speed difference between the two wheels to ensure stability during cornering. The role of the differential lock is to lock the differential, eliminating the speed difference between the two wheels and preventing the vehicle from slipping. 2. Different uses: The differential lock is mostly used for climbing and off-roading, while the differential is mostly used for track racing (such as touring car racing). However, some off-road vehicles use differentials for Dakar rallies, and racing cars use them for extreme drifting.

7

5

Share

What is the best position to install ETC?

For small cars, the ETC device is generally installed on the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed on the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have it installed later, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner needs to provide original and photocopied versions of their valid ID card and vehicle license. If the application is not made by the owner, the agent must also bring their valid ID card. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. Additionally, a bank card under the owner's name for deducting highway tolls is required, and the owner must be between 18 and 60 years old. Here are some precautions for installing ETC: Do not block the driver's view; it is best to install it behind the rearview mirror: Many car models have windshields with a large backward tilt angle, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase blind spots for the driver. Installing it behind the rearview mirror on the right side can help avoid blocking the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper rod connected to a switch. After the electronic tag is installed, the windshield will press the anti-tamper rod in. If the tag is removed arbitrarily, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid issues caused by the ETC device of the vehicle in front malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to prevent automatic toll payment for the wrong vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.

18

0

Share

Which manufacturer produces the original ambient lighting for Mercedes-Benz?

Mercedes-Benz original ambient lighting is branded as Mercedes. Locating the ambient lighting settings: First, enter the vehicle's settings menu, select the lighting category, and then find the ambient lighting settings. Selecting color types: Mercedes-Benz vehicles offer 64 different ambient lighting colors for owners to choose from, with each color providing a distinct experience for passengers. Interior ambient lighting serves as decorative illumination, primarily enhancing the cabin's aesthetics at night and creating a comfortable atmosphere. Using ambient lighting in the vehicle can also help maintain a pleasant and relaxed mood for passengers during nighttime driving.

20

0

Share

What does it mean when the OBD indicator light is on?

Which gear should the Tayron be in when waiting at a red light?

What engine does the SAIC Maxus G20 use?

How to Get into a Land Rover Without Feeling Awkward?

What are the differences between a differential lock and a differential?

What is the best position to install ETC?

Which manufacturer produces the original ambient lighting for Mercedes-Benz?

What Causes the Mercedes-Benz C260L to Shake During Cold Starts?

Which has more space, the Geely Vision X3 or the Chery Tiggo 3x?

What is the fuel consumption per 100 kilometers for the Yuexiang V3?

How to Read a Car Tire Pressure Gauge?