What does it mean when the Mercedes G shows 'Next Refill 1qt Engine Oil'?

1 Answers
Hall
07/30/25 6:49am
When the Mercedes G displays 'Next Refill 1qt Engine Oil,' it indicates a low engine oil level, and it is necessary to add oil promptly, approximately 6-7 liters. Oil viscosity and quality: Choosing engine oil that matches the vehicle model is crucial. If oil with excessively low viscosity is selected, it will undoubtedly affect the oil's performance, impacting both the vehicle's operation and power output. Additionally, the quality of the oil must be carefully considered, as inferior oil often lacks reliable quality assurance, which may lead to sluggish acceleration without immediate concern. Oil filling quantity: If too much oil is added, the excess can easily enter the combustion chamber (due to excessive internal pressure) and form gummy carbon deposits. While no obvious effects may be noticed initially, over time, the accumulated carbon deposits will worsen, not only affecting the vehicle's overall power performance but also potentially clogging the catalytic converter's pores, leading to excessive exhaust emissions (increased fuel consumption). In severe cases, oil burning may occur.
Was this review help?
14
5
Share
More Forum Discussions

How to Troubleshoot Electric Power Steering System Failures?

Power steering troubleshooting methods: inspect the steering gear, steering pump control valve, oil cup filter, and steering fluid, then clean the entire power steering system; check other rotating components, and replace the steering pump or steering gear assembly under special circumstances. The following outlines the causes of power steering failures: 1. Overloading of the steering system: causes excessive wear of the stator and rotor inside the steering pump, leading to irregular movement of the oil within the pump; 2. Steering gear failure: loose installation of the steering gear or steering pump on the bracket, internal wear of the steering gear, and improper adjustment of gears and racks.
4
5
Share

How Does a Dual-Clutch Transmission Work?

The working principle of a dual-clutch transmission is as follows: 1. Fast shifting speed: One clutch corresponds to the odd-numbered gears, while the other clutch corresponds to the even-numbered gears. When the vehicle is engaged in one gear, the other clutch and the corresponding next gear are already in a ready state. As soon as the current gear is disengaged, the next gear can be engaged immediately. Therefore, the shifting speed of a dual-clutch transmission is faster than that of a conventional automatic transmission and even a manual transmission. 2. Lightweight: Although the internal structure of a dual-clutch transmission is complex, its actual size and weight are not significantly increased compared to a manual transmission, unlike an automatic transmission. Thus, vehicles equipped with a dual-clutch transmission do not add excessive burden to the owner.
19
2
Share

What does it mean when a yellow exclamation mark appears on the steering wheel and the car won't start?

A yellow exclamation mark on the steering wheel and the car not starting is an indication of the electric power steering system warning light, which means there is a fault in the electric power steering system. Below are specific details about the steering wheel indicator light: 1. A yellow indicator light indicates that the steering system is partially malfunctioning, and turning the steering wheel requires more force. 2. A red indicator light indicates that the steering system is completely malfunctioning, and its function has failed, requiring very high force to turn the steering wheel. Additional information: The steering wheel is a wheel-like device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The steering wheel, through the gear system introduced between the driver and the wheels, operates flexibly and effectively isolates intense vibrations from the road.
1
1
Share

What are the reasons for the Baojun 730 low beam not working?

Baojun 730 low beam not working reasons are as follows: Dead battery: You can check the battery power by pressing the horn. If you forget to turn off electrical devices overnight, the next morning you may not be able to start the car, and even the low beam won't turn on. Bulb damage: Most bulbs have a certain service life. When nearing the end of their lifespan, the light intensity becomes substandard, and they generate excessive heat until the filament burns out. Additionally, there are other reasons such as water entering the headlight assembly after vehicle wading. When hot bulbs come into contact with water droplets, the sudden temperature drop may cause cracking and damage. Blown fuse: Most low beam fuses can be found in the engine compartment fuse box or the fuse box on the left side of the instrument panel. The fuse diagram is usually printed on the back of the fuse box cover. You can use a specialized clip to remove and inspect it. Low beam control circuit malfunction: It may be due to issues with the light control switch. In this case, you should take the vehicle to a repair shop for inspection to determine if there are any abnormalities in the light switch control logic.
16
2
Share

Does the Dash Cam Still Work After the Car is Turned Off?

It depends on various situations, mainly determined by how it is wired. Here are the specific details: 1. Connected to constant power: Works 24/7. 2. Connected to ACC power: Automatically turns on when the car key is turned to ACC or the engine is started, and continues to work normally if the car is turned off but still in ACC mode. 3. Connected to the cigarette lighter: If the cigarette lighter still has power after the car is turned off, the dash cam will continue to work; if the cigarette lighter loses power after the car is turned off, the dash cam will shut down. 4. Dash cam with built-in battery: Even if the car does not supply power, the dash cam will continue to work automatically if not turned off when the owner leaves the car, until the battery is depleted.
3
1
Share

How to reset the tire pressure on an Audi A3?

Audi A3 tire pressure reset method is: 1. Start the car and enter the main menu to find the tire pressure monitoring system; 2. Reset the tire pressure data and save it, then turn off the vehicle; 3. Restart the vehicle to complete the tire pressure reset. Taking the Audi A3 2021 model as an example, its body dimensions are: length 4351mm, width 1815mm, height 1458mm, with a wheelbase of 2630mm. The Audi A3 2021 model is equipped with a 1.4T turbocharged engine, with a maximum power of 110kw and a maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.