What does it mean when the lottery shows 'obtained quota'?

1 Answers
Bruce
07/24/25 3:13am
When the lottery shows 'obtained quota,' it means that you have obtained a car purchase quota through the lottery system. Below are the specific details of the new 2021 lottery regulations: 1. Addition of family unit application channels: Quotas are divided into two types—ordinary quotas where 'car-free families' and individuals participate in the same pool, and new energy quotas where 'car-free families' are ranked based on their points. 2. Quota preference: In 2021, 60% of new energy quotas will be prioritized for 'car-free families,' increasing to 70% in 2022 and 80% after 2023. For ordinary quotas, 'car-free families' will have a much higher probability of winning than individuals, based on family points. 3. Changes in quota allocation frequency: The application period has been adjusted from monthly to two concentrated periods—January 1 to March 8 and August 1 to October 8 annually. The number of quota allocations has been reduced from six times a year to three times, with new energy quotas allocated in May and ordinary quotas allocated in June and December.
Was this review help?
16
2
Share
More Forum Discussions

What is the fuel consumption of the Mercedes-Benz SLK200?

The official fuel consumption data provided for the Mercedes-Benz SLK200 is 8.6L per 100 kilometers. The fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain distance at a specific speed. It is a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value obtained by manufacturers in an objective environment, using a dynamometer installed on the vehicle's chassis to measure and convert into speed parameters, then calculating the theoretical experimental fuel consumption data for the model at specified speeds. Improper driving habits: The amount of fuel consumption is closely related to the driver's personal habits, specifically manifested in not turning off the engine during prolonged idling or frequent ignition, aggressive acceleration or frequent braking while driving, driving at low gear with high speed or high gear with low speed, etc. All these driving habits significantly 'contribute' to increased fuel consumption. Abnormal tire pressure and tire wear: If the tire pressure is too low, the friction between the tires and the ground increases, leading to greater resistance and higher fuel consumption. The normal tire pressure is around 2.5bar, which can be slightly reduced by 0.1bar in summer. Of course, tire pressure should not be too high either; it's best to inflate according to the vehicle's standard values. Additionally, if the tires are severely worn, frequent slipping will occur, also increasing fuel consumption. Fuel quality and carbon deposits: Many car owners do not pay attention to fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality cannot be ignored. Regular maintenance at a 4S shop is a forward-looking investment, not only ensuring the normal performance of the vehicle but also saving unnecessary expenses in the future.
5
3
Share

What does 'Please Service Parking Brake' mean?

It indicates a malfunction in the vehicle's handbrake system. Two types of handbrake systems: There are two types of handbrake systems in motor vehicles. The first is the traditional mechanical handbrake, and the second is the electronic handbrake. The electronic handbrake utilizes electronic components for operation, offering great convenience through switch control. When paired with the auto-hold system, it enables the vehicle to automatically engage the handbrake, effectively preventing the vehicle from rolling, making it an excellent feature. Handbrake working principle: The professional term for the handbrake is auxiliary brake. Unlike the main braking system, it operates by using a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use can reduce its effectiveness and increase the handbrake's travel distance. The red exclamation mark on the dashboard alerts the driver that the handbrake is engaged, meaning the auxiliary brake is in operation. Pulling the handbrake upwards engages it (vehicle parking brake), while pushing it downwards releases it. Therefore, pull up to park and press down to release when ready to move.
12
4
Share

Where is the rearview mirror heating button on the 2021 Excelle?

The rearview mirror heating button on the Excelle is located on the air conditioning control panel. The rearview mirror heating function is connected in series with the rear windshield defrost function. It is represented by a square frame containing three upward-curving arrows. The rearview mirror heating feature is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for drivers to manually wipe the mirrors frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. Meanwhile, as the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively heating the mirror and removing frost. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror. These wires consume a significant amount of power. When using the rearview mirror heating function, ensure the car is in an active state. Avoid activating the function while the car is stationary to prevent draining the car battery, which could leave insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help defog the mirrors by blowing warm air.
20
4
Share

What are the motions of a car?

Car motion includes both rotation and translation. Here are the specific details: Definition of rotation: An object moves in a circular path around a point or axis, such as the Earth rotating on its axis while also revolving around the Sun. This corresponds to the rotation of a vehicle's wheels. Definition of translation: Within the same plane, when all points of a figure move the same distance in a straight-line direction, this movement is called translation. This corresponds to the physical phenomenon of a vehicle's body moving forward. Basic forms of mechanical motion: One of the most fundamental forms of mechanical motion is rotation. In a rotating object, all points except those on the axis of rotation move in circular paths of varying sizes around the same axis. This is called "rotation." The trajectories of all points on the rotating object are concentric circles centered on the axis. At any given moment, the linear velocity and linear acceleration of different points on the rotating object vary. Points closer to the axis have smaller linear velocity and linear acceleration, but the same angular velocity and angular acceleration. When a rigid body rotates around a fixed point, it is called "fixed-point rotation," such as the motion of a gyroscope's rotor. Sometimes, when a point moves in a circular path around another fixed point, it is also called "rotation of the point around the center," such as the motion of planets around stars or electrons around atomic nuclei.
15
0
Share

What car brand has a logo with five vertical bars?

Five vertical bars represent the logo of WM Motor, a Chinese independently produced pure electric vehicle brand. The WM EX5 features front-wheel drive, with a front suspension system consisting of MacPherson independent suspension with a stabilizer bar, and a rear suspension system using a variable cross-section torsion beam suspension. The front fascia of the WM EX5 adopts the commonly seen closed grille design for electric vehicles, with the WM Motor logo on the charging cover displaying battery information. Below is an introduction to WM Motor: Introduction to WM Motor Brand: WM Motor (WM-Motor) was established in 2015, headquartered in Shanghai, China. Core R&D Technologies: WM Motor has established a comprehensive testing and certification system centered around the three-electric system (battery, motor, and electric control), covering areas such as three-electric systems, chassis, safety, NVH, electronic and electrical components, interior and exterior trims, autonomous driving, and intelligent systems. This includes 120 vehicle-level tests, 3,400 system-level tests, over 14,000 component-level tests, and 34 calibration tests. It is a fully self-developed, comprehensive electric vehicle testing and development system, and one of the first in China to complete the development process and technical standards centered on the three-electric system. Introduction to WM Maven Concept Car: The WM Maven concept car is WM Motor's first pure electric sedan mass-production concept version, with an NEDC comprehensive range of 800km, equipped with L3 autonomous driving, L4 full-scenario automatic parking, and 5G connectivity technologies.
2
4
Share

What is the 0-100 km/h acceleration time of the Genesis G80?

According to official data, the Genesis G80 2.5T model achieves a 0-100 km/h acceleration time of 6.6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The BMW 5 Series has a maximum torque of 290 Nm and a 0-100 km/h acceleration time of 7.8 seconds. The Genesis G80 2.5T model has a torque of 422 Nm and a 0-100 km/h acceleration time of 6.6 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Genesis G80 is equipped with an 8-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW 5 Series has a power-to-weight ratio of 106 Hp/T and a 0-100 km/h acceleration time of 7.8 seconds. The Genesis G80 has a power-to-weight ratio of 204 Hp/T and a 0-100 km/h acceleration time of 6.6 seconds.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.