···
Log in / Register

What does it mean when the left rear tire loses pressure?

3 Answers
BeckettLynn
09/05/25 4:01am
Left rear tire losing pressure means the tire pressure in the left rear tire is abnormal, with reduced pressure that requires calibration. Below is relevant information about tire pressure: 1. Introduction to tire pressure: Strictly speaking, tire pressure refers to the air pressure inside the tire. In automotive maintenance, the engine is the heart of the car - engine failure leads to the end of the vehicle's life, while tire pressure is like the car's blood pressure. The level of tire pressure plays a crucial role in the car's performance and power. 2. The relationship between tire pressure and vehicle performance: Tire pressure is an indicator of a vehicle's load capacity. The load capacity depends on the level of tire pressure. According to the relationship between the tire's load index, pressure, and load capacity, higher tire pressure means greater load capacity, while lower pressure reduces load capacity. When a car moves at constant speed on level roads, it must overcome rolling resistance from the ground and air resistance. Tire pressure significantly affects the rolling resistance coefficient.
Was this review help?
3
0
Share
LaJayla
09/17/25 4:36am
Last year when I was driving long-distance, the dashboard suddenly lit up with a left rear tire pressure loss warning, indicating insufficient tire pressure, just like a bicycle tire going flat after being punctured. I was quite nervous at the time. After pulling over to check, I found the tire was indeed a bit soft, probably punctured by roadside gravel or a nail. If not inflated or repaired promptly, the tire could deform and overheat while driving, increasing the risk of a blowout, especially during high-speed sharp turns where loss of control becomes more likely. Since then, I've been using a portable pressure gauge monthly to check tire pressure, keeping it near the standard range to avoid both fuel waste and danger. The key is developing good habits—avoiding potholes regularly to ensure safe and worry-free driving. If pressure loss occurs, don't push it; getting it checked at a professional shop is more reliable.
Was this review help?
18
3
Share
Expand All
SanReed
10/31/25 5:05am
As an avid car maintenance enthusiast, I believe that low pressure in the left rear tire simply means the tire's air pressure is too low, possibly caused by a leaking valve, rim gap, or external damage. I've encountered this issue before—insufficient pressure can cause tire deformation, accelerate wear, and significantly increase fuel consumption. The solution is to first pull over for a safety check and use a pump to temporarily inflate the tire. If it loses air quickly, switch to the spare and head to a repair shop. For prevention, work in tandem with the vehicle's tire pressure monitoring system and manually check the pressure once or twice a month. Remember the correct tire pressure values and measure them when the tires are cold for the most accurate reading. This practice extends tire life, enhances driving stability, and saves fuel. Paying attention to these details keeps accidents at bay.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Does running out of fuel and stalling the car have any impact on the vehicle?

Running out of fuel and stalling has minimal impact on the car, but it's not advisable to do this frequently. Here's relevant information: 1. Overview: The fuel system's function is to supply the engine with a specific quantity of clean, well-atomized gasoline according to its operating conditions, allowing it to mix with air and form a combustible mixture. Additionally, the fuel system needs to store a considerable amount of gasoline to ensure the vehicle has a substantial driving range. 2. Classification: The fuel system also includes electronically controlled gasoline injection systems, fuel supply systems (including auxiliary devices such as fuel tanks, fuel filters, fuel pumps, oil-gas separators, fuel lines, and fuel gauges).
9
0
Share

What does 9AT transmission mean?

It refers to a 9-speed automatic transmission. The "AT" stands for automatic transmission, while the number 9 indicates it has 9 forward gears. As a core component of automobiles, transmissions significantly impact vehicle performance, safety assurance, and stability. Below are more relevant details: 1. Advantages of 9AT transmission: Its greatest benefits are fuel efficiency and faster acceleration. The core structure of a 9AT transmission consists of 4 planetary gear sets and 6 shift elements, one more shift element than the 8HP. With multiple gears, the gear ratio difference between each gear is reduced, providing a wide range of reduction ratios. This allows for lower engine speeds at high speeds, resulting in reduced fuel consumption and stronger acceleration. 2. Disadvantages of 9AT transmission: The increased number of gears means more internal components, higher manufacturing and R&D requirements, and consequently greater costs. The complex internal structure also leads to more potential failure points. Additionally, compressing component sizes to fit the housing reduces the torque capacity.
6
2
Share

Is the Road Slippery During Rain or After Rain?

At the beginning of rain, the road surface is most prone to becoming slippery. Extended information about driving in rainy weather is as follows: 1. Overview: The incidence of car accidents in rainy weather is five times higher than in sunny weather. When driving in windy and rainy conditions during summer, the driver's visibility is obstructed, and the viewing distance is shorter, especially during heavy rainstorms when the windshield wipers cannot promptly clear the rainwater from the windshield, leaving the driver's vision blurred. 2. Maintain Good Visibility: Besides driving cautiously when on the road in rainy weather, it is essential to promptly turn on the windshield wipers. In dim weather conditions, the low beam and fog lights should also be activated. If there is frost on the front windshield, turn on the air conditioning and direct the cold air towards the front windshield. If the rear windshield has frost, activate the rear windshield heater to quickly eliminate the frost and prevent obstructed visibility of vehicles behind.
14
5
Share

What are the effects of depressing the clutch on a downhill slope?

Depressing the clutch on a downhill slope means coasting in neutral. Once the vehicle's braking system fails, the result is that the driver completely loses control of the vehicle. Keeping the clutch depressed for prolonged periods causes the release bearing to rotate at high speeds continuously, significantly reducing its lifespan. It can also lead to excessive wear in the clutch system. Additional information about the clutch is as follows: 1. Introduction: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Definition: The clutch, commonly known as "geely zi" in Hong Kong, is a device that switches the engine power of a car or other power machinery to the axle.
3
3
Share

Handle Violations First or Renew the License First?

First, you must handle the violations before applying for license renewal. When renewing a driver's license, it is not allowed to have any outstanding violations or unpaid fines. All violations must be settled, and fines must be paid before the license can be renewed. If you have outstanding violations and need to renew your license, please first visit the traffic enforcement station of the local police branch to handle the violations, pay the fines at the bank, and then proceed to the relevant license renewal office to complete the renewal process. Documents required for license renewal: Bring two copies of your ID card, two recent 1-inch color passport photos without headwear, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (free medical examinations are also available at the vehicle management office). License renewal process: The driver submits the required documents to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after verifying the documents.
16
5
Share

Are LED headlights brighter than xenon headlights?

LED headlights are brighter than xenon headlights. The functions of automotive LED lights are: 1. Activating turn signals to alert following vehicles and reduce rear-end collisions; 2. Improving road visibility to enhance driving safety; 3. Informing trailing vehicles about braking actions to prompt speed reduction; 4. Using hazard lights during emergency stops or poor visibility conditions to notify surrounding traffic. Maintenance methods for automotive LED lights include: 1. Regularly inspecting lamp covers to prevent moisture accumulation; 2. Periodically replacing bulbs; 3. Properly adjusting headlight height; 4. Using high-quality replacement bulbs; 5. Protecting lights from foreign object impacts.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.