What does it mean when the i-stop yellow light is on?

2 Answers
EvanFitz
07/25/25 2:41pm
i-stop yellow light indicates that the auto start-stop system is turned off. The solutions are: 1. Press the ignition switch twice without stepping on the brake; 2. Press the i-stop switch for 10 seconds; 3. Start the car and turn the steering wheel from the far left to the far right; 4. Turn off the engine and let it sit for more than 10 minutes. The working principle of the auto start-stop system is: When the car stops due to traffic congestion or at an intersection, and the driver steps on the brake pedal to stop and shift gears, the Start or Stop system automatically detects that the engine is idling and no gear is engaged, the wheel speed sensor of the anti-lock system shows zero, and the electronic electromagnetic sensor shows there is enough energy for the next start.
Was this review help?
8
2
Share
LeoLynn
08/11/25 9:09pm
I've encountered the i-Stop yellow warning light several times, which indicates an issue with the auto start-stop system. It usually occurs when the system detects insufficient battery charge or unsuitable operating temperatures, such as during cold starts when the system automatically disables itself. While driving, this won't affect the vehicle's normal operation, but the auto start-stop function will be temporarily suspended. I recommend checking your battery condition - if it's aging or depleted, replace it as needed. Also, check if there are any other trouble codes on the instrument panel. In my case, it was caused by a failing battery, and the light went off after replacement. Regular maintenance of the battery and electrical system can prevent many minor issues.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What does 70V mean?

It refers to the current voltage of the electric vehicle battery being 70V. If the vehicle is currently in motion, it indicates that there is 20% of the battery power remaining. If the vehicle is in an idle state, it means 90% of the battery has been consumed, and charging should be initiated immediately. Additional information: Types of electric vehicle batteries: Chemical batteries can be categorized by their working properties into: primary batteries (non-rechargeable), secondary batteries (rechargeable), and lead-acid batteries. 1. Primary batteries include: paste-type zinc-manganese batteries, paperboard zinc-manganese batteries, alkaline zinc-manganese batteries, button-type silver-zinc batteries, button-type lithium-manganese batteries, button-type zinc-manganese batteries, zinc-air batteries, and primary lithium-manganese batteries. 2. Secondary batteries include: nickel-cadmium batteries, nickel-metal hydride batteries, lithium-ion batteries, and secondary alkaline manganese batteries. Lead-acid batteries can be divided into: open-type lead-acid batteries and fully sealed lead-acid batteries.
15
5
Share

What are the differences between Land Cruiser GXR and VXR?

Here are the differences between Land Cruiser GXR and VXR: 1. Engine: The Toyota Land Cruiser VXR is equipped with a 202kW (4.0L naturally aspirated) engine; the Toyota Land Cruiser GXR is equipped with a 228kW (4.6L naturally aspirated) engine. 2. Curb weight: The Toyota Land Cruiser VXR has a curb weight of 2635kg; the Toyota Land Cruiser GXR has a curb weight of 2735kg. 3. Maximum torque: The Toyota Land Cruiser VXR has a maximum torque of 385/4400Nm/rpm; the Toyota Land Cruiser GXR has a maximum torque of 453/3400Nm/rpm.
7
1
Share

What is the AWD four-wheel drive system?

AWD is a full-time four-wheel drive system. There are three differentials in the full-time four-wheel drive system. In addition to one differential on each of the front and rear axles, there is also a central differential between the front and rear drive shafts. The difference between AWD and 4WD is that AWD lacks the low-ratio transmission compared to 4WD, because AWD is a full-time four-wheel drive system, eliminating the need to switch between two-wheel and four-wheel drive during driving. Part-time four-wheel drive cannot be used on roads with good conditions. Since this four-wheel drive system does not have a central differential, the tire grip is excellent, reducing the likelihood of slipping on slippery roads. Full-time four-wheel drive adds a central differential to the part-time four-wheel drive system, effectively resolving the speed difference between the front and rear drive shafts.
2
3
Share

Do halogen lights need to be registered when converted to LED lights?

Converting halogen lights to LED lights does not require registration. Changing the original halogen bulbs to LED bulbs does not need to be reported to the vehicle management office, as such modifications are not considered illegal unless they affect driving safety or exceed the vehicle's body area, which would then be classified as illegal modifications. The following is a related introduction to automotive halogen lights: Introduction 1: Automotive halogen lights, also known as tungsten halogen bulbs or quartz bulbs, are a variant of incandescent lamps. Halogen lights are made with tungsten filaments but are enclosed in a smaller quartz glass shell. Because the shell is very close to the filament, if it were made of regular glass, it would melt easily. Introduction 2: The gas inside the glass shell consists of different gases that form the halogen lamp group. These gases have a very interesting characteristic: they combine with tungsten vapor.
1
2
Share

How often should private cars be inspected after six years?

According to the relevant provisions of the "Regulations for the Implementation of the Road Traffic Safety Law", small and micro non-operating passenger vehicles must be inspected once every two years within the first six years, once every year after exceeding six years, and once every six months after exceeding 15 years. The relevant introduction of annual inspection is as follows: Introduction 1: Annual review means annual inspection, but it is more colloquial. Annual review refers to the annual or biennial inspection of the safety of the car, including a comprehensive inspection of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. Introduction 2: Annual review means routine review on a yearly basis. Annual inspection usually refers to the inspection of certain formal IC cards, while annual review is more commonly used in daily life, such as the review of meal tickets, shopping membership cards, etc., which is usually referred to as "annual review".
3
4
Share

Can you park temporarily on a solid white line by the roadside?

It is possible to temporarily park a vehicle on a solid white line by the roadside. More relevant information is as follows: Introduction 1: The solid white line at the edge of the road is actually the boundary line of the motor vehicle lane, used to separate the motor vehicle lane from the non-motor vehicle lane or sidewalk. There is no inherent connection between the solid white line and whether parking is allowed. On roadsides with solid white lines, drivers need to refer to other signs and markings to determine whether parking is permitted. Introduction 2: Long-term and temporary parking is strictly prohibited where there is a solid yellow line by the roadside, or where there is an "×" no-parking sign, or where there is a no-parking sign with a diagonal line and the word "stop".
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.