What does it mean when the Honda AWD light is on?

2 Answers
VanLilliana
07/29/25 4:13am
When the Honda AWD light is on, it indicates a fault in the vehicle's electronic control system. A diagnostic tool is required to read the fault code before proceeding with repairs. AWD stands for All-Wheel Drive system. Part-Time Four-Wheel Drive: AWD stands for All-Wheel Drive system. To understand AWD, it's essential to first know what Part-Time 4WD (PART-TIME4WD) is. Part-Time 4WD is the most common four-wheel-drive system. It is called Part-Time 4WD because it cannot be used on roads with good traction. Due to the absence of a central differential, the speed difference between the front and rear drive shafts during turns can only be offset by one of the tires slipping. When the road surface has good traction, it becomes difficult for the tires to slip. Therefore, Part-Time 4WD cannot be used on roads with good traction, which is how it got its name. Full-Time Four-Wheel Drive: Based on AWD, Full-Time Four-Wheel Drive (transfer case without 2WD mode) has also evolved. Full-Time Four-Wheel Drive uses an intelligent transfer case that can distribute different levels of driving force to the front axle as needed. A high-quality intelligent transfer case can achieve a power output variation from 0% to 100%.
Was this review help?
1
1
Share
OliviaMarie
08/12/25 7:58am
Hey, I've been driving a Honda for years and always get a bit worried when the AWD light comes on. This light usually indicates an issue with the all-wheel drive system, possibly due to the sensor detecting wheel speed imbalance or a minor differential fault. In my car, I've seen the light turn on automatically when the road is too slippery, but if it stays on constantly, you should take it seriously, otherwise reduced traction can lead to skidding. I recommend slowing down and finding a safe place to park, first checking the owner's manual for codes or hints, then contacting a dealership for a diagnostic check. Don't ignore it, especially on long trips, as accumulated faults could cause bigger damage. Regular maintenance of tires and suspension can help reduce risks.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

What is the function of the ECO button in the Mitsubishi Outlander?

Mitsubishi Outlander ECO button function is to activate the car's economy mode, which is very common in many mid-to-high-end cars. The following is a related introduction to the car's economy mode: Classification: Eco mode is also divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard is on, it indicates that the car's economy mode has been activated. Application: During daily driving, you can activate the eco mode. However, when the speed exceeds 120 km/h, when idling, in N/P gear or manual mode, especially when climbing a slope, it is not necessary to activate the eco mode. Doing so would not reflect the fuel-saving characteristics of the eco mode and would also affect the power performance.
14
1
Share

How to Adjust the Display Time on the 9th Generation Accord?

The method to adjust the display time on the 9th Generation Accord mainly involves the following steps: 1. Click the menu on the screen. 2. Click system settings. 3. There will be a time setting option in the settings; open it to make adjustments. Here is some additional information about the 9th Generation Accord: 1. Building on Honda's unique VTEC technology, it employs direct injection, Atkinson cycle, and VTC (Variable Valve Timing Control), along with the introduction of an EGR (Exhaust Gas Recirculation) system, improving fuel economy by 13% and increasing maximum torque by 8%. 2. The full-envelope vibration damping and noise insulation technology effectively enhances cabin quietness. Additionally, it features an ANC (Active Noise Control) system and an ASC (Active Sound Control) system (which uses speakers to emit sound waves to optimize engine acoustics), achieving top-tier quietness. The lightweight design improves driving performance by reducing body weight.
10
1
Share

What are the differences between the used GL8 3.0 and 2.4?

The differences between the used GL8 3.0 and 2.4 are as follows: Mileage varies: The GL8 2.4 has a mileage of 125,367 kilometers with a combined fuel consumption of 12.1L/100km; the GL8 3.0 has a mileage of 105,678 kilometers with a combined fuel consumption of around 11.5L/100km. In terms of power: The 3.0 has a larger displacement, providing ample power but higher fuel consumption; the 2.4 has a relatively smaller displacement with slightly less power but lower fuel consumption. Introduction to the GL8: As a top-tier MPV model, the Buick GL8 has achieved batch exports with its advantages of luxurious style, powerful performance, and spacious comfort, being hailed by Southeast Asian media as the 'perfect MPV.' It has also served as the official ceremonial vehicle for major international events such as Beijing's Olympic bid and APEC conferences.
12
5
Share

Fuel consumption of the second-generation Song Pro XS version?

The fuel consumption of the second-generation Song Pro XS version is 7.0L/100km. Below is a partial introduction about the BYD Song Pro: Features: It is a "Global Intelligent Large Five-Seat SUV" under BYD. Taking the 2021 second-generation 1.5T manual elite version of the Song Pro as an example: it is equipped with a 1.5T inline four-cylinder engine, with a maximum torque of 245 Nm and a maximum horsepower of 160 hp, paired with a 6-speed manual transmission, and the body type is a 5-door 5-seat SUV. Exterior: The length, width, and height are 4650mm, 1860mm, and 1700mm respectively, the wheelbase is 2712mm, the fuel tank capacity is 63 liters, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
10
5
Share

Where to Process Out-of-Town Driver's License Renewal in Beijing?

Out-of-town driver's license renewal in Beijing is processed at the Vehicle Management Office. Below are specific details regarding the renewal of an expired motor vehicle driver's license: 1. Renewal within one year of expiration: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if the renewal or medical examination deadline is exceeded by less than one year, the driver's license is in an overdue but renewable status. The driver can bring their ID card, expired driver's license, and a medical condition certificate issued by a county-level or higher medical institution (or a military medical institution at or above the regiment level) to the Vehicle Management Office to complete the renewal procedures without taking any subject exams. 2. Renewal after one year but less than three years of expiration: The driver must take the Subject 1 exam at the Vehicle Management Office. Upon passing the exam, they can proceed with the normal renewal process.
16
0
Share

Mazda 6 Air Conditioning Not Cooling?

What are the possible reasons for Mazda 6 air conditioning not cooling: 1. Lack of refrigerant: For the air conditioning to function properly, it requires "Freon," commonly known as refrigerant. In fact, refrigerant does not deplete on its own unless there has been an accident. 2. Dirty condenser: The vehicle's radiator and condenser need to be well-maintained for heat dissipation. Poor heat dissipation not only affects the cooling performance of the air conditioning but can also lead to engine overheating. Therefore, when the air conditioning is not cooling, it is necessary to check the vehicle's related heat dissipation equipment. 3. Aging or loose compressor belt: Among the issues causing the air conditioning not to cool, the belt is a critical component. If the belt is not replaced regularly, it can lead to issues like lack of power assistance, abnormal noises, and ultimately affect the cooling performance of the air conditioning.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.