What does it mean when the GAC GS4 displays 'Check Emission System'?

Why Should Vehicles from the Right Have the Right of Way at Intersections?

At intersections, vehicles from the right are given the right of way because in China, drivers sit on the left side of the car. The A-pillar on the left side is closer to the driver's eyes, obstructing more of their view. As a result, drivers at intersections may have more difficulty seeing the situation on their left side. Therefore, the rule is to give the right of way to vehicles coming from the right. This regulation is based on Article 52 of the Road Traffic Safety Law Implementation Regulations: at intersections without traffic signals, vehicles must yield to those coming from the right. Since Chinese drivers are positioned on the left side of the vehicle, they have more reliable and safer control over the distance to vehicles on their left. Thus, giving the right of way to vehicles from the right helps ensure safer vehicle control, reduces the risk of collisions, and enhances safety for all parties involved.

11

2

Share

How to remove the maintenance reminder on Changan CS75?

Method to remove the maintenance reminder on Changan CS75: 1. Turn the ignition key to the ON position (turn the key twice, or press the start button twice for keyless start); 2. Press the selection button on the steering wheel; 3. Then press the reset button for about 5 seconds (keep holding the reset button without releasing); 4. Turn off the power, remember not to release the reset button, then turn on the power again to clear the maintenance reminder. The Changan CS75 is a compact SUV positioned between the CS55 and CS95, equipped with Bluecore series engines. The Changan CS75 comes with two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower.

15

0

Share

Should the car heater use internal or external air circulation?

When using the car heater, it's recommended to first activate internal circulation to warm up the cabin, then switch to external circulation. The steps to operate the heater are: 1. Locate the air conditioning control buttons on the dashboard; 2. Press the ON button on the air conditioning control panel to activate the system; 3. Click the A/C button to turn off the cooling function; 4. Rotate the temperature control knob to set the desired temperature for heating. The car air conditioning system is an installed air regulation device with these functions: 1. It can cool, heat, ventilate and purify the air inside the cabin; 2. Provides passengers with a comfortable environment; 3. Reduces driver fatigue and improves driving safety.

15

3

Share

What brand is the Mercedes-Benz with the letter B?

The Mercedes-Benz with the letter B refers to Brabus-tuned Mercedes-Benz vehicles. Brabus models include: Brabus Class, Brabus S-Class, Brabus M-Class, Brabus CLS, Brabus A-Class, etc. Taking the 2012 Brabus CLS as an example, it features a 4-door, 4-seat sedan body structure with dimensions of 4966mm in length, 1881mm in width, and 1421mm in height, a wheelbase of 2874mm, a fuel tank capacity of 80 liters, and a trunk capacity of 520 liters. The 2012 Brabus CLS is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 306 PS, a maximum power of 225 kW, and a maximum torque of 370 Nm.

12

2

Share

What car brand has a logo resembling the letter 'T'?

A logo resembling the letter 'T' represents Tesla vehicles, which include models such as: Tesla Model Y, Tesla Model 3, Tesla Model YX, Tesla Model YS, Tesla Model 3 Import, etc. Taking the 2021 Tesla Model YX as an example, its body dimensions are: length 4979mm, width 1964mm, height 1445mm, with a trunk capacity of 744.7 liters. The 2021 Tesla Model YX is equipped with a permanent magnet motor, delivering a maximum horsepower of 538 PS, a maximum power of 395 kW, and a maximum torque of 755 Nm, paired with a single-speed fixed gear ratio transmission.

20

4

Share

How to Replace the Battery in a Kodiaq Remote?

Method for replacing the battery in a Kodiaq remote: 1. There is a circular button on the side of the car key. Press this button with one hand while pulling out the mechanical key with the other hand. 2. Hold the key with one hand and a flat-head screwdriver with the other. Locate the gap in the middle of the top end of the key, insert the screwdriver, and gently pry the key until a gap is created. 3. Remove the key circuit board, push the battery out from one side with your finger, and take out the old battery. Place the new battery with the positive side facing up into the battery slot, and push it in until it is fully secured. 4. Cover the key circuit board back onto the key, align the two separated halves of the key, and press both sides of the key with your hands until the upper and lower parts are completely joined. Finally, insert the mechanical key back into the key gap to complete the replacement. The Kodiaq is Skoda's first mid-size SUV developed based on the Volkswagen MQB platform, offering both 5-seat and 7-seat layouts. It is equipped with either a 1.8T or 2.0T engine, with a total of 6 models available. The Kodiaq's body dimensions are 4698mm in length, 1883mm in width, and 1676mm in height, with a wheelbase of 2791mm.

9

2

Share

What does it mean when the GAC GS4 displays 'Check Emission System'?

Why Should Vehicles from the Right Have the Right of Way at Intersections?

How to remove the maintenance reminder on Changan CS75?

Should the car heater use internal or external air circulation?

What brand is the Mercedes-Benz with the letter B?

What car brand has a logo resembling the letter 'T'?

How to Replace the Battery in a Kodiaq Remote?

How Does a Sensor Work?

What are the differences between Shell fully synthetic engine oil 5W-30 and 5W-40?

What is the difference between domestic and joint venture cars?

What are the types and specifications of oilstones?