What does it mean when the engine fault light comes on?

1 Answers
MicahLee
07/29/25 10:12am
The engine fault light coming on indicates issues such as degraded engine oil or a clogged air filter. Below are relevant introductions about the dashboard: Insufficient washer fluid level: This indicator shows the level of the windshield washer fluid. If the fluid is nearly depleted, the light will illuminate, prompting the owner to refill the washer fluid promptly. The light will turn off after adding the cleaning fluid. Electronic throttle malfunction: This light is commonly seen in Volkswagen models. During the vehicle's self-check, the EPC light will illuminate for a few seconds and then turn off. If there is a fault, this light will stay on, indicating the need for immediate inspection and repair. This indicator is used to display the working status of the front and rear fog lights. When the fog lights are turned on, both lights will illuminate, with the left one in the diagram indicating the front fog light and the right one indicating the rear fog light.
Was this review help?
3
1
Share
More Forum Discussions

What is the Difference Between Full LCD and Non-Full LCD?

Here are the differences between full LCD and non-full LCD as follows: 1. Size: The combination of non-full LCD and pointer-type instrument clusters is functionally sufficient in terms of display, but full LCD has a larger size. 2. Clarity: Non-full LCD instrument clusters are spliced-type, which can be understood as imitation LCD, and are not as clear as full LCD. 3. Imaging Principle: The imaging principles are different. Ordinary TVs use cathode-ray tube phosphor imaging, which appears relatively rough and glaring. LCD uses liquid crystal aluminum foil reflection technology, which looks relatively finer. However, due to the maturity of the technology, the imaging speed of LCD is slower than that of cathode-ray tubes.
11
1
Share

What does it mean to stop midway during Subject 2?

Stopping the car for more than 2 seconds is considered a midway stop. Relevant information is as follows: 1. Midway stop standard: In the driver's license Subject 2 test, a midway stop is determined when the GPS positioning confirms that the vehicle is in a completely stationary state during the test. The penalty for a midway stop has been changed from disqualification to deducting 5 points each time. 2. Ways to avoid midway stops: During the test, when passing over uneven ground or the seams between cement blocks in the test area, the speed should be slightly faster. When turning the steering wheel to the maximum, release the clutch a bit to prevent a midway stop; when returning the steering wheel, slightly press the clutch to control the speed.
13
1
Share

What is the relationship between torque and horsepower?

Torque and horsepower are both important indicators for measuring car performance. Under fixed power conditions, there is an inverse relationship between car torque and engine speed—the faster the speed, the smaller the torque, and vice versa. This reflects the vehicle's load capacity within a certain range. Like horsepower, car torque is one of the main indices of an engine, influencing performance aspects such as acceleration, climbing ability, and suspension. Horsepower is a crucial parameter for measuring engine performance and can be converted into power, where 1 horsepower = 1 HP = 0.735 kilowatts. Horsepower indicates how quickly work is done and is related to speed, while the ability to pull a certain load is related to torque. For example, if Engine 1 has a power of 110 horsepower, a small displacement, and a maximum torque of 140 Nm, while Engine 2 has a power of 90 horsepower, a large displacement, and a maximum torque of 240 Nm, Engine 1 has higher horsepower and smaller displacement and torque compared to Engine 2. Therefore, Engine 2 can pull more cargo than Engine 1. Higher engine power inevitably leads to higher fuel consumption, increased emissions, and pollution. For consumers and the environment, blindly pursuing horsepower or power is one-sided. In reality, the reason some domestic and international models can offer a wide price range to consumers is due to the variety of engines, transmissions, powertrains, and electrical systems provided by manufacturers. However, using a high-performance engine will significantly increase the price of the car.
19
0
Share

Does insurance cover flood damage to cars caused by natural disasters?

Insurance does cover flood damage to cars caused by natural disasters. Below is relevant information about waterlogging insurance: 1. Definition: Waterlogging insurance is a newly derived type of auto insurance, primarily serving as an additional coverage that car owners purchase for their engines. It applies when the insured vehicle is submerged up to the exhaust pipe or intake manifold due to heavy rain or flooding, and the driver either continues to operate the vehicle or attempts to start it using inertia; or when the vehicle is started without necessary post-flooding procedures. In these two scenarios, purchasing waterlogging insurance is essential to receive corresponding compensation. 2. Claims handling: Compensation is provided for actual repair costs within the coverage limit. However, if the cumulative claim amount reaches the coverage limit during the insurance period, the insurance liability terminates. Each waterlogging insurance claim is subject to a 15% absolute deductible rate.
10
1
Share

Can a CVT Transmission Go Through Water?

Transmissions have vent holes, which are one-way and theoretically should not let water in. However, if submerged in water for a long time, water can enter when opened. Relevant information is as follows: 1. Advantages: The benefits of a CVT transmission include low maintenance costs, excellent smoothness, and improved fuel efficiency for the vehicle. 2. Structure: The internal structure of a CVT transmission is very simple, consisting of only two pulleys and a steel belt. The CVT transmission relies on the friction between the steel belt and the pulleys to transfer power. If paired with a high-power engine, the steel belt may slip.
11
0
Share

How to Know When a Car is Low on Engine Oil?

To check if a car is low on engine oil, inspect the oil dipstick. Below is an introduction about engine oil: 1. Overview: Engine oil, also known as motor oil or engine lubricant, is a substance enhanced with additives in base oil. 2. Composition: It mainly contains anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. Engine oil is used for lubricating internal combustion engines. 3. Functions: The primary functions of engine oil are to reduce friction and wear on moving parts, remove sludge (one function of dispersants) and varnish (function of detergents) from the engine. It also neutralizes acids produced from fuel combustion and lubricant oxidation (function of detergents), improves piston ring sealing, and cools the engine by carrying heat away from moving components.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.