What does it mean when the DSC warning light is on?

What size tires does the Citroen C-Quatre use?

Citroen C-Quatre uses 205/55-R16 radial tires. Here are the details: 1. R16 represents 16-inch radial tires, where 16 is the rim diameter, and the actual rim diameter is approximately 24mm larger than the nominal diameter. 2. 205 is the tire's cross-sectional width in millimeters, which is 205mm, and 55 represents the aspect ratio, meaning 55% of the 205mm width, resulting in a calculated value of 112.75mm. 3. Additional information: Tires of this size provide stronger and more effective grip, combined with the C-Quatre's low ground clearance, resulting in more stable handling performance.

14

4

Share

What is the displacement of the Mercedes-Benz GLS?

Mercedes-Benz GLS is equipped with a 3.0-liter turbocharged engine across the entire lineup, so the displacement of this vehicle is 3.0 liters. Below is relevant information about the Mercedes-Benz GLS: 1. The 3.0-liter turbocharged engine in the Mercedes-Benz GLS has a maximum power output of 270 kW, a maximum torque of 500 Nm, a maximum power speed of 6400 rpm, and a maximum torque range of 1600 to 4500 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT). The 9AT is a relatively comfortable transmission, known for its excellent shift smoothness, which enhances both the comfort and driving quality of the vehicle. 2. The Mercedes-Benz GLS also boasts a highly sophisticated chassis. Both the front and rear suspensions of this vehicle employ double-wishbone independent suspensions, which significantly improve the car's handling and comfort. The double-wishbone suspension can absorb more impacts.

11

0

Share

Does the Elantra have a rearview mirror heating function?

The Elantra Premium model is equipped with a rearview mirror heating function, while other models do not have this feature. The rearview mirror heating function refers to the ability of the exterior rearview mirrors to be heated via electric heating wires embedded behind the mirror glass when driving in rainy, snowy, or foggy weather, ensuring a clear surface of the mirror. Information about the rearview mirror heating function is as follows: 1. The principle of rearview mirror heating involves installing an electric heating element (heating film) inside the mirror glass of both side rearview mirrors. In rainy or snowy weather, when the rearview mirror heating function is activated, the heating element quickly reaches a fixed temperature within a few minutes, typically between 35-60 degrees Celsius, thereby heating the mirror to remove fog and frost. 2. The rearview mirror heating function is very practical but should not be used frequently. Each use should not exceed 30 minutes, otherwise it may affect the lifespan and clarity of the mirror.

6

1

Share

What is the horsepower of the imported Jaguar XF?

The imported Jaguar XF is equipped with two types of engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine: 1. The low-power version of the 2.0-liter turbocharged engine has 250 horsepower and a maximum torque of 365 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1300 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). 2. The high-power version of the 2.0-liter turbocharged engine has 300 horsepower and a maximum torque of 400 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1500 to 4500 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT).

13

0

Share

How many items are tested in Subject 2?

For small vehicles C1 and C2, the test items include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope (canceled for C2), turning at a right angle, and driving on a curve (commonly known as the S-curve). Some regions also include a sixth item: high-speed card collection. For large vehicles A1, A2, A3, B1, and B2, the test items include: stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curve, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. Subject 2 is scored out of 100 points, with evaluation criteria set for failure, deduction of 20 points, deduction of 10 points, and deduction of 5 points. The test is considered passed if the following conditions are met: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. If the Subject 2 test is failed on the first attempt, a retake is allowed. If the retake is not taken or is also failed, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving test permit, the number of rescheduling for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth rescheduled test is still failed, the results of other previously passed subjects will be invalidated.

8

0

Share

What are the maintenance items for the first car service?

Car first service maintenance items are as follows: Replace engine oil; Replace engine oil filter; Check engine working condition, such as whether pipeline connections are normal, whether there are leakage points, whether the engine sound is normal, and whether there are abnormal noises; Check coolant level, battery fluid, and windshield washer fluid level to ensure they are between the minimum and maximum scale marks. Check brake pad and tire wear, as well as tire pressure condition; Check all oil pipe ports of the system for any signs of oil leakage. Maintenance precautions: After the first service, regular maintenance should also be paid attention to, such as periodic oil and filter changes, checking tire condition and brake pad wear, etc. When changing the oil, pay attention to the oil model and production date to prevent the maintenance shop from substituting inferior products, and take the remaining oil back.

7

0

Share

What does it mean when the DSC warning light is on?

What size tires does the Citroen C-Quatre use?

What is the displacement of the Mercedes-Benz GLS?

Does the Elantra have a rearview mirror heating function?

What is the horsepower of the imported Jaguar XF?

How many items are tested in Subject 2?

What are the maintenance items for the first car service?

How to Use the Cruise Control on the Baojun 510?

What is the emission standard of the 2015 Volkswagen Lavida?

What are the steps for Volkswagen key matching?

What is the detailed process of crystal coating?