What does it mean when the DRL light is on in Dongfeng Dolika?

2 Answers
OAugust
07/29/25 7:53am
Daytime Running Light is the meaning of the DRL light being on. Additional information: 1. Introduction to Dongfeng Dolika: Dongfeng Dolika is a long-distance logistics light truck launched by Dongfeng Automobile Co., Ltd. in 2001, evolved from the first 3-ton light truck produced by Dongfeng in 1995. As a mid-to-high-end light truck brand of Dongfeng, Dongfeng Dolika is positioned as the 'Pioneer of All-round Logistics', integrating advanced technologies from Nissan and other sources, making it an all-round product developed by Dongfeng Light Truck for the logistics market. 2. Vehicle introduction: Dongfeng Dolika currently has six main products including D5 and D6 blue-plate light trucks, D7 and D8 yellow-plate light trucks, and D9 and D12 yellow-plate medium trucks, with vehicle lengths ranging from 5m to 12m. It can meet various transportation needs such as green channel, express delivery, less-than-truckload, supermarkets, cold chain, building materials, agricultural products, etc., achieving multi-dimensional coverage across all industries, scenarios, road conditions, and values.
Was this review help?
1
2
Share
GenesisLynn
08/13/25 2:48am
When driving a Dongfeng Dolika, the DRL light suddenly comes on, which usually indicates that the daytime running light system is working or there is a potential fault. From my experience, the most common causes are a burnt-out or loose bulb, especially after long-distance driving where vibrations worsen contact issues; or an electrical circuit fault, such as a blown fuse or aging wiring harness causing a short circuit. Additionally, sensor failure or control module abnormalities may also trigger the light, which can affect daily driving safety, especially in low-light conditions. If the light stays on but the lamp doesn’t illuminate, it suggests the system may have failed. I recommend first checking the bulb and fuse locations—usually marked in the manual. If the issue persists, take it to a repair shop for a technician to diagnose with specialized tools to avoid problems on the road. Don’t forget, regular truck maintenance can reduce such incidents, including cleaning lamp sockets to prevent oxidation. This also benefits overall vehicle condition, as truck durability relies on attention to detail.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

What is the minimum ground clearance of the Honda URV?

Dongfeng Honda URV has an unladen ground clearance of 180mm and a minimum ground clearance of 140mm, delivering average performance in terms of chassis. The front and rear suspension configurations align with the product positioning. More details are as follows: 1. To reduce interior noise, engineers designed extensive underbody panels for the URV and enhanced noise insulation in key areas, all aimed at creating a comfortable and quiet environment for the owner. The URV features a front MacPherson strut and rear double-wishbone suspension setup, prioritizing handling and power performance. 2. In terms of chassis craftsmanship, both the wheel arches and underbody exhibit excellent coverage. The front suspension adopts a MacPherson strut independent suspension structure, similar to mainstream urban SUVs, characterized by high space utilization, simple structure, and low cost. Except for the cast iron bearing housing, all other connecting rods in the front suspension are made of steel. The rear suspension employs a double-wishbone independent suspension structure, with the upper control arm being significantly thinner than the lower one.
12
5
Share

What Are the Consequences of Driving with the Electronic Parking Brake Engaged?

Here is a detailed introduction to the consequences of driving with the electronic parking brake engaged: 1. Degree of Engagement and Driving Distance: If the brake is not tightly engaged and the driving distance is short, the impact on the car is minimal, but it causes more wear on the parking brake pads and increases fuel consumption. 2. Tight Engagement: If the brake is tightly engaged and the driver fails to notice it, or if the driving speed is high and the distance is long, the parking brake pads can wear out severely—potentially to the point of needing replacement after just one instance. Excessive wear and heat generation from the brake pads can lead to smoke and a burning smell. The heat can also transfer to surrounding components, and high temperatures may reduce the strength of these parts or even cause deformation. 3. Assessing the Outcome: If there is no smoke or strong burning smell, there is likely no issue, and no inspection is needed. However, if there is a strong burning smell and visible smoke, check whether the parking brake still functions properly—whether it releases fully when disengaged, whether the braking force remains consistent when engaged, and whether it can still hold the car on a slope.
14
2
Share

Can Vinegar Remove Cement from a Car?

Vinegar can remove cement from a car. Cement is somewhat corrosive and harmful to the car's paint, so it must be dealt with promptly when it adheres to the car. Why vinegar can clean cement: The main component of cement is calcium oxide, which reacts with acetic acid in vinegar, softening the cement. Therefore, vinegar is somewhat effective in cleaning cement off a car. However, since the acidity of white vinegar is not very strong, it needs to be sprayed multiple times on the cement and left for a while to soften before cleaning can be effective. Method for removing cement with vinegar: For small patches of cement, spray vinegar on the cement and let it soak for five to three minutes, then gently scrape it off with an old bank card. Be sure to scrape along the paint surface and avoid back-and-forth motions to prevent the dissolved cement from scratching the paint. After scraping, rinse with clean water and dry with a towel. Other methods for cleaning cement off a car: For larger cement particles, toilet cleaner can be used. Toilet cleaner contains dilute hydrochloric acid, which can dissolve cement. However, be sure to wear rubber gloves when handling.
2
5
Share

Can You Drive on the Highway with a Nail in the Tire?

If the tire has not been repaired after being punctured by a nail, you should not drive on the highway. It is recommended to visit a professional repair shop before continuing to drive. Correct actions to take when a car tire is punctured by a nail: Check for air leakage after the puncture: If the tire loses air quickly after being punctured by a nail, it indicates that the nail has penetrated the tire. In such cases, if you are close to a nearby repair shop, you can use a portable air pump to inflate the tire and then drive to the repair shop. However, if the tire loses air very rapidly, do not continue driving, as this can cause significant damage to the tire. Instead, replace it with the spare tire before driving to the repair shop. If the punctured tire is a run-flat tire, you can drive at a speed not exceeding 80 km/h to the nearest repair shop. No air leakage after puncture: If you find a nail in the tire but there is no noticeable air leakage, do not remove the nail yourself. Instead, you can use saliva to check if there is any air leakage at the puncture site. Initially, a nail puncture may not cause immediate air loss, but over time, the tire may gradually lose air. Therefore, it is essential to address the issue as soon as possible.
20
2
Share

Why is it important to look far ahead when driving straight?

When driving straight, it is important to select a good reference point. First, the driver should look straight ahead and pay attention to both sides, must choose a proper reference point to maintain straight driving, timely adjust the direction, and always be aware of various traffic situations ahead, so as to detect and handle them promptly. Techniques for maintaining straight driving: Look far ahead while also paying attention to the near distance and hold the steering wheel correctly. The driver should adjust the viewing distance ahead according to the change in speed. When driving at a higher speed, look farther ahead; when driving at a slower speed, look appropriately closer; and use peripheral vision to occasionally check the surroundings of the vehicle. Operate the steering wheel by pulling with one hand and pushing with the other, keeping both hands steady and natural, with hands shoulder-width apart, and avoid using too much force. When adjusting the direction, steer early and slightly, correcting as needed, using a combination of pulling and pushing with both hands to maintain the vehicle's straight path. Lastly, there are speed requirements: maintain a steady speed for straight driving. Generally, it is advisable to drive at a moderate speed, not exceeding the speed limit, which ensures both driving safety and fuel efficiency. During tests, accelerate or decelerate as required.
14
0
Share

Can a Scrapped Vehicle Be Exchanged for a New One?

When a car is scrapped, the insurance company does not compensate for a new car. Instead, the insurance company will compensate based on the value of the car before it was scrapped. Regulations for scrapping private vehicles: For 5-seat family cars and 7-seat SUVs, non-commercial small and micro vehicles have no usage lifespan. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial sedans, and wheeled special machinery vehicles also have no usage lifespan restrictions. The difference between guided scrapping and mandatory scrapping: Guided scrapping is a recommendation, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: reaching the stipulated usage lifespan; failing to meet the national safety technical standards for in-use vehicles after repairs and adjustments; failing to meet national standards for emissions or noise after repairs, adjustments, or control technology; and failing to obtain a vehicle inspection qualification mark for three consecutive inspection cycles after the inspection validity period expires.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.