What does it mean when the driver's license status is locked on the Traffic Management 12123 platform?

1 Answers
SanCourtney
07/30/25 1:18am
When the driver's license status is locked on the Traffic Management 12123 platform, it means that certain procedures such as license transfer cannot be processed temporarily. Below are the detailed explanations: 1. Content: Driver's license transfer refers to the procedure where a vehicle owner relocates their driver's license to a new residence due to reasons such as job transfer or moving, in order to avoid the hassle of annual license review. It can be categorized into two types: license transfer out and transfer in. 2. Requirements: The applicant must appear in person to handle the procedure and sign on the spot; it cannot be delegated to others. 3. Required materials: Proof of identity, which includes the original and a copy of the 'Resident Identity Card'; proof of household registration transfer, which is the 'Permanent Population Registration Form' or 'Household Registration Card'; for active military personnel (including armed police), the proof of identity includes the original and a copy of the 'Resident Identity Card' or the original and a copy of the military ID issued by the People's Liberation Army or the Armed Police Force, along with an original certificate issued by the military unit at or above the regiment level stating the ID number and residential address; an out-of-town motor vehicle driver's license; and a white-background standard digital photo.
Was this review help?
6
3
Share
More Forum Discussions

Will replacing the front fender cause the car to depreciate?

Replacing the front fender will cause the car to depreciate. Here is some relevant information about the front fender: 1. Introduction: The fender is the outer body panel that covers the wheel, named for its shape and position resembling a bird's wing in older car models. Based on installation location, it is divided into front fender and rear fender, with the front fender installed at the front wheel area. 2. Function: The fender's role is to prevent sand, gravel, and mud kicked up by the wheels from splashing onto the underbody of the car during driving. Therefore, the material used must be weather-resistant and have good formability. Some cars have front fenders made of slightly elastic plastic materials.
8
0
Share

Is it necessary to cover a new car with a car cover when parked outdoors?

The new car parked outdoors needs to be covered with a car cover. Here are the relevant introductions about car covers: 1. The function of the car cover: The main function of the car cover is to prevent dust, sun exposure, rain, corrosion, etc. The car cover has a good protective effect on the car. The car cover can effectively prevent bad weather from corroding the car paint. Another function is to prevent others from scratching the car paint. 2. Precautions: When covering the car with a car cover, it is best to wait until the vehicle has completely cooled down before proceeding. Because after the vehicle is turned off after driving, the temperature of the vehicle cannot drop instantly. After covering the car with the car cover, the local temperature of the car cover rises, causing the humidity to increase, and there will be no air flow inside the car cover.
6
4
Share

How to Replace the Battery in an Audi Q5 Key?

Audi Q5 key battery replacement method is: 1. Press the trapezoidal button on the back; 2. Pull out the mechanical key outward; 3. Remove the old battery and replace it with a new one. Precautions for using the key include: 1. Do not place it with electronic devices; 2. Do not throw or toss the car key; 3. Do not use the wrong car key battery; 4. Do not leave the spare key in the car; 5. Prevent the smart key from being in a high-temperature environment or coming into contact with liquids; 6. Do not place the key with metal items; 7. Do not expose the key to high-temperature places; 8. Do not get the key wet. The Audi Q5 is a mid-size SUV under the Audi brand. Taking the Audi Q5 2018 Heritage Edition Progressive as an example, its body dimensions are: length 4629 mm, width 1898 mm, height 1655 mm, with a wheelbase of 2807 mm.
19
3
Share

Can LED headlights pass the annual vehicle inspection?

According to the new regulations issued by the Ministry of Public Security in 2019, China strictly prohibits the modification of lighting groups. However, as long as the shape and brightness are not excessively altered, they can still pass the annual inspection. Here are the key requirements to follow: 1. Brightness requirement: The brightness should generally be high enough but not too glaring. 2. Height requirement: The lights should not be positioned too high or too low. 3. Color temperature requirement: The light detector can only measure color temperatures up to 6500K; anything higher will not be detected and will fail the inspection. 4. Modification requirement: Installing xenon or LED headlights must include dual-beam lenses to be considered legal.
8
1
Share

What does invalid exhaust emission test mean?

Invalid exhaust emission test refers to the mandatory test during the annual vehicle inspection. If the exhaust emission indicators fail to meet the standards, it is considered an invalid test. Vehicle owners should take this seriously and address the issue promptly. If the vehicle fails the retest for excessive emissions (non-compliance), penalties will be imposed. Introduction to vehicle inspection tips: Clean the throttle once before the inspection; Use 97-octane gasoline in advance. Higher-grade gasoline produces less pollution. If ethanol-blended gasoline is available, it is even better, as it contains 10% ethanol, which can reduce exhaust emissions by 10%; On the way to the inspection station, increase the engine speed. Due to urban traffic congestion, frequent stops and starts lead to incomplete combustion, resulting in pollutants adhering to the surface of the catalytic converter. Higher engine speeds produce the lowest emissions, and the high-speed airflow can also flush away deposits on the catalytic converter; After the exterior inspection, rev the engine hard. Taking a cold vehicle for the inspection is unwise. The reason is simple: the optimal working temperature of the catalytic converter is between 400 to 800 degrees Celsius, and it takes a long time for a cold engine to reach 400 degrees. Revving the engine for a few minutes before the inspection can quickly raise the catalytic converter's temperature above 400 degrees and maintain it for a while; If you suspect your vehicle has issues, you can remove the air filter or spray a small amount of water on it; Replace the catalytic converter if it is severely aged or ineffective. If the catalytic converter is poisoned, purchase a catalytic converter cleaner from the auto parts market and perform a cleaning maintenance on the engine. After maintenance, the exhaust emissions should pass the annual inspection. Notes: If a vehicle fails a random exhaust emission test, the traffic police will temporarily confiscate the vehicle's registration certificate. The owner must carry out repairs and rectifications within 7 days and can only retrieve the registration certificate upon presenting a retest pass certificate. No additional fees are required for the retest. Article 90: If a motor vehicle driver violates the road traffic safety laws or regulations regarding road traffic rules, a warning or a fine ranging from 20 to 200 yuan shall be imposed. If other provisions of this law stipulate otherwise, those provisions shall prevail. Article 95: If a motor vehicle driven on the road does not display a license plate, inspection compliance label, insurance label, or if the driver fails to carry the vehicle registration certificate or driving license, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding documents or labels or complete the necessary procedures, and may impose penalties in accordance with Article 90 of this law.
12
2
Share

How to Coordinate the Clutch and Brake Pedals?

The coordination method between the clutch and brake pedals varies depending on different situations: 1. When starting the car: First press the brake, then the clutch, shift into first gear, gently release the clutch until the car body shakes, then release the brake and clutch. 2. When shifting gears to accelerate: Only press the clutch, no need to press the brake. 3. When stopping the car: First press the clutch, then the brake. The clutch is located inside the flywheel housing between the engine and the transmission. It is the assembly component in the car's drivetrain that directly connects to the engine. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The brake is located below the steering wheel, close to the car's chassis. Its working principle is to use the friction between the brake pads and the brake disc, as well as between the tires and the ground, to create significant friction, converting the kinetic energy of the moving vehicle into heat energy after friction, and stopping the rotating parts through friction.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.