What does it mean when the driver's license issuance location information fails to be retrieved?

1 Answers
MorganLynn
07/29/25 8:33pm
It means the traffic management system cannot retrieve the file information. This situation is usually caused by a system failure that prevents finding the driver's information. Below are relevant explanations: 1. Driver's license issuance location: The driver's license issuance location refers to the place where the license was issued, which is the local vehicle management office where the driver's license was obtained. The registration location of the driver's license is the personal residential address registered when applying for the driver's license. The vehicle license is a document for motor vehicles, serving as the 'identity proof' of motor vehicles. 2. Driver's license: Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive motor vehicles without permission. Generally, people cannot drive on the road without a license. However, for those who have mastered safe driving skills, the document that permits them to drive vehicles on the road is the 'driver's license'.
Was this review help?
5
1
Share
More Forum Discussions

Where is the VIN number of the Baojun 730 located?

Baojun 730's VIN number can be found in the following locations: the lower left corner of the dashboard, on the firewall in the engine compartment, and on the vehicle nameplate of the radiator crossbeam. The VIN number is a combination of letters and numbers. The body dimensions of the Baojun 730 are: length 4780mm, width 1780mm, height 1740mm, with a wheelbase of 2750mm and a fuel tank capacity of 52 liters. The Baojun 730 is equipped with a 1.5-liter turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250Nm. The engine reaches its maximum power at 5200 rpm and its maximum torque between 2000 to 3400 rpm. It is paired with a 6-speed manual transmission.
19
0
Share

How to Determine if a Car's Air Conditioning is Low on Refrigerant?

Methods to determine if a car's air conditioning is low on refrigerant: 1. During normal continuous operation of the air conditioning, if there are continuous bubbles in the sight glass, it indicates a lack of refrigerant; 2. Open the car hood and check for oil stains at the air conditioning system joints—if present, it indicates a lack of refrigerant; 3. During normal continuous operation of the air conditioning, if there are no bubbles in the sight glass, but brief bubbles appear when the air conditioning stops, it indicates the refrigerant level is normal. The process of refilling air conditioning refrigerant is: 1. Evacuate the system, close the manual valves on the pressure gauge and the high and low pressure manual valves; 2. Connect one end of the hose to the injection valve fitting of the refrigerant can; 3. Open the refrigerant can, loosen the nut on the pressure gauge hose to allow some gas to escape, then close it; 4. Open the high-pressure side manual valve and invert the can; 5. Inject the specified amount of liquid refrigerant, then close the refrigerant injection valve and the high-pressure manual valve.
19
4
Share

What is the appropriate tire pressure for a Geely Emgrand car?

The appropriate tire pressure for a Geely Emgrand car is between 2.3 and 2.5 bar. Tire pressure refers to the air pressure inside the tires. The dimensions of the Geely Emgrand are: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm and a fuel tank capacity of 50 liters. The Geely Emgrand is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80 kW at 6000 rpm and a maximum torque of 142 Nm at 4400 rpm. It is paired with a 5-speed manual transmission. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
16
3
Share

Why does the reversing camera display that the parking system is unavailable?

The reason why the reversing camera displays that the parking system is unavailable is: there is a problem with the car's camera or the power wiring. The reversing camera, also known as the parking assist system, reversing visual system, or onboard monitoring system, automatically activates when the vehicle is shifted into reverse gear. The reversing camera uses a far-infrared wide-angle camera device installed at the rear of the vehicle. Through the display screen inside the car, obstacles behind the vehicle can be clearly seen. Its function is to allow the driver to see the situation behind the car on the display when reversing, avoiding accidents caused by the driver not being able to see the rear situation while reversing, thereby improving driving safety.
7
0
Share

Why Does the Wiper Make a Squeaking Noise?

The reasons for the wiper making a squeaking noise are: 1. Long-term use causing the wiper blade to age and harden; 2. Foreign objects stuck between the wiper blade and the windshield; 3. Friction in the wiper linkage bushing; 4. Malfunction of the wiper motor. The wiper is a blade structure installed in front of the windshield, consisting of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its function is to remove rain, snow, and dust that obstruct the view on the windshield. Precautions for using the wiper include: 1. Replace or clean the wiper blade promptly when severe wear or dirt is found; 2. When checking the wiper's operation, wet the windshield with water first; 3. After turning off the wiper switch, the wiper blade should return to the lower side of the windshield and stop.
17
4
Share

What Sound Does Engine Cylinder Scoring Make?

Engine cylinder scoring produces a rattling sound. Engine cylinder scoring refers to deep grooves being formed on the inner walls of the cylinder, causing the piston and piston rings to lose their sealing ability when rubbing against the cylinder walls. This results in reduced cylinder compression pressure and loss of power. The solutions for engine cylinder scoring include: 1. Promptly replenishing engine coolant; 2. Refilling engine oil; 3. Replacing piston rings and piston pin circlips. The causes of engine cylinder scoring are: 1. Engine overheating due to coolant leakage or insufficient coolant levels that were not replenished in time; 2. Low engine oil levels, leading to loss of cylinder sealing and lubrication function; 3. Broken piston rings scratching the cylinder walls; 4. Dislodged piston pin circlips scratching the cylinder walls; 5. Piston rings getting stuck in the ring grooves due to carbon buildup, losing their sealing effect; 6. Piston pins protruding and scratching the cylinder walls; 7. Foreign objects entering the cylinder; 8. Insufficient clearance between the piston and cylinder walls.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.