What does it mean when the driver's door lock is activated?

Can I Change the Engine Oil and Filter Myself?

It is possible to change the engine oil and filter by yourself, but it is not recommended. Improper tightening of the oil filter can easily cause thread stripping, and incorrect oil quantity control may lead to overfilling or underfilling, both of which can affect the normal operation of the engine. Here are the steps to change the engine oil and filter: 1. Drain the oil: There is an oil drain plug underneath the vehicle. Simply unscrew the drain plug to allow the oil to flow out. Observe the color of the oil—normal oil should be translucent. If it appears black, it should be replaced promptly. 2. Locate the old oil filter, loosen and remove it using an oil filter wrench, then allow the remaining oil in the compartment to drain completely. Once all the oil has drained, replace the oil filter. Use a filter wrench to install the new filter and tighten it securely. Then, tighten the drain plug. Pour new oil into the oil filler port, selecting the appropriate oil for your vehicle. Choose the correct capacity based on the engine displacement. After pouring the oil, pull out the dipstick to check if the oil level is sufficient. Avoid overfilling; the correct amount is best.

14

5

Share

What does the L gear mean in an automatic transmission car?

Automatic transmission L gear is the low-speed forward gear. Generally, only mid-to-low-end automatic transmission models have the L gear, because these models' automatic transmissions do not have a manual mode. Shifting from D gear to L gear does not require stopping or pressing the brake; you can push the gear lever into L gear while driving. The following is a related introduction to the automatic transmission L gear: 1. When the L gear is engaged, the transmission will only switch between 1st and 2nd gears, and no matter how you press the accelerator, it will not shift up to 3rd gear or higher. When in L gear, the transmission is in 1st or 2nd gear, providing the vehicle with strong torque but at a relatively low speed. 2. The high torque of the L gear can be used to climb some steep slopes, or the low speed of the L gear can be utilized to descend long slopes.

3

5

Share

How many chances are there on the day of the second retake for Subject 1?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate that on the day of the second retake for Subject 1, candidates can take the test twice. If the first attempt is unsuccessful, a second retake is allowed free of charge. If the second attempt still fails, the Subject 1 test is terminated, and the candidate can only schedule another test after ten days. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. To pass Subject 1, a score of 90 is required. The test consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point for a total of 100 points. If a candidate answers 11 questions incorrectly, the system will automatically submit the test and end the session. Subject 1 test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should dress appropriately (no slippers), avoid bringing electronic devices or bags into the test center, carry their ID card, and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the test room. Upon entering, candidates will be assigned a seat at the identity verification station. Once seated, the test begins. Ensure the camera is aligned correctly and follow test discipline. If the first attempt fails, a same-day retake is allowed. If the retake also fails, a new appointment must be made with a fee. After completion, queue to collect the score report and sign it. Unsigned reports are considered invalid. There is no limit to the number of times Subject 1 can be scheduled. Each subject allows one test attempt, with one retake if unsuccessful. If the retake is not taken or fails, the test session ends, and the applicant must reschedule. In contrast, Subject 2 and Subject 3 allow only five test attempts each, with rescheduling permitted after ten days. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge tests. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (under the Ministry of Public Security's Order No. 123) does not include "Subject 4."

20

3

Share

Does Stalling at Startup Cause Significant Damage to the Car?

Stalling at startup can cause significant damage to the car. The following are the potential damages caused by stalling at startup: 1. It is detrimental to the engine. The engine speed drops instantaneously when the vehicle starts, causing the engine to "sputter" and nearly stall, which is a severe lugging condition; 2. It affects car components. Sudden loss of power while the engine is running can easily cause damage due to intense friction and component collisions; 3. It impacts the engine internals. The ECU automatically adjusts and injects an overly rich air-fuel mixture. If the fuel proportion in the mixture is too high, the fuel cannot burn completely, adhering to the surfaces of internal engine components. Under high temperatures, this can lead to carbon deposits.

17

3

Share

What are the signs of a faulty throttle body?

Here are the signs of a faulty throttle body: 1. Unstable engine idle speed; When the car's throttle body malfunctions, the engine idle speed tends to become unstable, particularly manifesting as persistently high idle speed that won't decrease. In severe cases, the engine may fail to idle at all. If such symptoms occur, it may indicate a faulty throttle body. 2. Difficult engine starting; A malfunctioning throttle body affects the engine's air intake volume, leading to starting difficulties. This is especially noticeable during cold starts, which may become particularly challenging. When encountering such issues, it's advisable to inspect the car's throttle body to determine if it's the cause of the engine starting difficulties.

1

3

Share

What does the driving license subject 3 test include?

It includes 16 items, which are "preparation before driving, night driving, starting, right turn at intersection, U-turn, going straight through intersection, left turn at intersection, passing bus stop, gear shifting operation, meeting oncoming vehicles, overtaking, driving straight, changing lanes, passing crosswalk, passing school zone, and pulling over". Below is the relevant introduction to subject 3: 1. Subject 3, including road driving skills test and safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment, and is the abbreviation for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles. 2. The safe and civilized driving knowledge test of subject 3 includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.

11

1

Share

What does it mean when the driver's door lock is activated?

Can I Change the Engine Oil and Filter Myself?

What does the L gear mean in an automatic transmission car?

How many chances are there on the day of the second retake for Subject 1?

Does Stalling at Startup Cause Significant Damage to the Car?

What are the signs of a faulty throttle body?

What does the driving license subject 3 test include?

Will using 95-octane gasoline damage the Wuling Hongguang?

Can I Take the Subject 1 Test If I Forget to Bring My Student ID?

How to Fix the Electronic Parking Brake Malfunction in the Vezel?

Can Cola Be Used to Wash Car Headlights?