What does it mean when the car's water tap light is on?

1 Answers
OAmir
07/29/25 10:52pm
The yellow water tap light indicates an engine malfunction. Possible reasons for the engine malfunction light to illuminate include: poor fuel quality; suboptimal engine combustion state; carbon buildup in the engine; engine knocking, etc. The meanings of various indicator lights on the car dashboard are as follows: 1. Oil pressure indicator light: This is the oil warning light. If it stays on, it means the oil level and pressure are below standard values. Continuing to drive under these conditions will prevent the oil from providing proper lubrication, leading to unpredictable wear. In this case, an appropriate amount of oil should be added, and the light should turn off once the oil level is normal. 2. Brake system fault light: When this light comes on, first check if the handbrake is fully released. If the light remains on after releasing the handbrake, check the brake fluid level or if the brake pads are too thin. 3. Coolant temperature warning light: This light displays the temperature of the engine coolant. The engine is the heart of the car and is most vulnerable to lack of water or oil. If the engine coolant temperature is too high, continuing to drive can cause irreversible damage such as cylinder block deformation. In this case, the owner should promptly add coolant.
Was this review help?
8
5
Share
More Forum Discussions

What to Do When the Motorcycle Lights Are On but It Won't Start?

First, try starting the motorcycle and then increase the RPM to run it for a while. Check if the battery voltage has increased. You can observe it on the motorcycle dashboard or directly connect a multimeter to the battery terminals. If there is no fluctuation in the battery voltage after starting, it indicates a damaged generator or the connection wire between the generator and the battery. In this case, you can replace the engine coil or the connection wire.
6
5
Share

How to Adjust the Brake Light Wire of a Motorcycle?

Step on or hold down the rear brake and keep it pressed. Loosen the screw on the rear brake caliper, and brake fluid will seep out. After 1 or 2 seconds, tighten the screw. Throughout this process, keep the rear brake pressed, and you can release it only after finally tightening the screw. Pump the rear brake repeatedly about a dozen times to enhance the break-in.
18
0
Share

Can the transmission mileage be altered?

Transmission mileage can be altered. Here is the relevant information: 1. Vehicle odometer: There are two types of vehicle odometers for calculating mileage - mechanical and electronic. Mechanical odometers are typically modified by reversing the mechanism. Electronic odometers require ECU flashing, which is more technically demanding but quicker, though it comes with a fee since the ECU cannot be flashed arbitrarily. 2. Basis: The odometer displays the distance the vehicle has traveled, serving as a basis for assessing vehicle quality and maintenance. 3. Classification: Depending on the transmission structure, transmission fluid is categorized into manual transmission fluid and automatic transmission fluid.
20
2
Share

What is the maximum load capacity of the Suzuki UY125?

Suzuki UY125 has a maximum load capacity of 178kg. Here are the specific details about the Suzuki UY125: 1. Model positioning: The Suzuki UY125 is a scooter model under Suzuki, and it is a global model that can be seen not only in China but also in overseas markets. 2. Power: The engine used in the Suzuki UY125 is equipped with Suzuki's latest technology. This engine features lightweight and low-friction characteristics. Suzuki has optimized the combustion chamber of this engine to improve fuel efficiency and power. The engine of the Suzuki UY125 utilizes precise closed-loop electronic fuel injection technology.
12
5
Share

What are the maintenance methods for motorcycles?

The instruction manual provided with a new motorcycle specifies oil changes at intervals of 300, 500, and 1000 kilometers respectively, with the frequency adjusted according to the grade of oil used. Generally, it is recommended to change the oil every 3000 kilometers. In urban areas with cleaner streets, this interval can be extended to approximately 5000 kilometers, while in rural areas, Regular maintenance of the motorcycle battery is essential, including periodic charging. Particularly for water-based batteries, distilled water needs to be added approximately once a year.
6
1
Share

What are the two white dashed lines at an intersection?

Deceleration yield lines, used to remind drivers to slow down. Below is related extended information: 1. Lane dividing lines: Used to separate traffic flows moving in the same direction, indicating that vehicles are allowed to cross the line for overtaking or lane changing under safe conditions. 2. Roadway center lines: Used to separate opposing traffic flows. 3. Single yellow dashed lines: Used to separate lanes, allowing crossing for overtaking or turning when safe for both oncoming traffic and oneself, without violating traffic rules. 4. Longitudinal deceleration markings: A set of diamond-shaped dashed lines parallel to the lane dividing lines.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.