What does it mean when the car key is flashing?

2 Answers
MadisonLee
07/25/25 9:09pm
When the KEY indicator appears on the car dashboard, it generally means that the car cannot detect the key. Below are the situations and solutions when the key is flashing: Flashing situations: The key battery is dead; The key is not within the working range or placed in a hard-to-detect area inside the vehicle; There is another manufacturer's key similar to yours within the working range; The key was taken outside the vehicle while the ignition switch was in the OFF position, and then all doors were closed. Solutions: Replace the battery; Bring the key within the working range; Remove the other manufacturer's similar key from the working range; Bring the key back inside the vehicle.
Was this review help?
11
0
Share
LukeLynn
08/11/25 10:11pm
Every time my car key flashes, my heart skips a beat, worrying that the car might have problems starting. This is usually due to insufficient battery power in the key, and it's necessary to replace the battery promptly. I remember one time when the key kept flashing, causing me to struggle in the parking lot for a long time, only to find that replacing the battery fixed the issue. Additionally, it could be caused by a stuck button or signal interference leading to accidental triggering, such as when the key is pressed accidentally in a pocket. A safety suggestion is to keep a spare key and regularly check the cleanliness of the key, as dirty contacts can cause flashing. Preventive measures include replacing the battery annually and having the anti-theft system checked at a 4S shop. Don't overlook this small issue, or you might find yourself in trouble if the car won't start halfway.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Why Was the Volkswagen Gran Lavida Discontinued?

SAIC Volkswagen discontinued the Gran Lavida due to poor sales performance. Below are relevant details about the Volkswagen Gran Lavida: 1. Sales Performance: The Volkswagen Gran Lavida, the hatchback version of the Lavida, contrasts with the new Lavida's strong sales in both quantity and quality, along with a solid reputation. You might consider the Lavida as an alternative. 2. Powertrain: The powertrain is sufficient for family use. Not only is it adequate for daily family needs, but it also performs well on highways. 3. Active Safety Features: The Gran Lavida boasts commendable active safety configurations, with ESP (Electronic Stability Program) as standard across all variants. It features a well-tuned chassis, excellent sheet metal craftsmanship, and a robust, durable build.
5
5
Share

How to open the sunroof of Jetta VS5?

To open the sunroof of Jetta VS5: Press and hold the sunroof switch above the driver's position to open it. The sunroof is installed on the roof, effectively allowing air circulation inside the vehicle and increasing the intake of fresh air. Additionally, the sunroof provides a broader view and meets the needs for mobile photography and videography. The Jetta VS5 is the first SUV model under the Jetta brand, with dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, and a wheelbase of 2630mm. The front face of the Jetta VS5 adopts Volkswagen's X-design elements, extending bidirectionally to the hood and lower grille. It is equipped with the EA211 1.4T 110KW engine, shared with Volkswagen and Audi models, paired with either an MQ250 manual transmission or an Aisin AQ250 six-speed automatic transmission.
17
4
Share

What should be noted when using a vehicle hydraulic retarder?

When using a vehicle hydraulic retarder, it should be noted that the hydraulic retarder is an auxiliary braking device and cannot replace the service brake or parking brake. In case of emergency braking situations, the service brake should be decisively used. The hydraulic retarder should be used with caution on sharp bends or continuous winding roads. Below is a detailed introduction about vehicle hydraulic retarders: 1. Overview: A hydraulic retarder is a type of vehicle retarder that reduces the vehicle's speed through a hydraulic device. It is also known as a hydraulic deceleration device. When a vehicle is descending a long slope, using the exhaust brake provides limited braking effect. 2. Others: The stator of the hydraulic retarder is the retarder housing, connected to the rear of the transmission or the vehicle frame, while the rotor is connected to the drive shaft via a hollow shaft. Both the rotor and stator are cast with blades. The hydraulic retarder can be installed either in front of or behind the transmission.
20
1
Share

How many liters of engine oil should be added to the Crown 2.0t?

The Crown 2.0t requires 4.3 liters of engine oil, generally not exceeding 4.5 liters. Adding too much or too little engine oil is not advisable, as both can have adverse effects on the vehicle. Insufficient oil leads to poor lubrication, which can cause severe engine wear, potentially resulting in cylinder scuffing and significantly shortening the engine's lifespan. Conversely, overfilling the oil raises the fluid level, increasing engine resistance. The Crown's body dimensions are 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm. In terms of power, the Crown is equipped with a 2.0t inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 173 kW, 235 horsepower, and a maximum torque of 350 Nm.
12
2
Share

Why Does the New Car's Brake Squeak?

The reasons for the new car's brake squeaking are: 1. Severe wear of the brake disc; 2. Brake pad warning; 3. Use of inferior or overly hard brake pads; 4. Presence of sand or foreign objects between the brake pad and brake disc. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 furnace temperature tracker to ensure the temperature distribution during the coating process meets quality standards. The steps for replacing brake pads are: 1. Release the handbrake and loosen the hub screws of the wheel that needs brake replacement; 2. Remove the tire to expose the brake caliper and brake disc; 3. Hang the brake caliper with a rope and remove the old brake pads; 4. Lift the hood and unscrew the cover of the brake fluid reservoir; 5. Align and embed the new brake pads, placing the inner pad with the wear indicator on the inside; 6. Reinstall the brake caliper and tighten the caliper screws to the required position.
19
3
Share

Is it necessary to add a steering wheel lock to a car?

It is necessary to add a steering wheel lock to a car for the following reasons: 1. The car equipped with an anti-theft steering wheel lock increases the difficulty for thieves to steal the car, prolongs the time required, and enhances the chance of detecting the situation, making it more effective for anti-theft purposes; 2. The car steering wheel lock uses a high-quality lock core, which is drill-proof and pry-proof, featuring a new practical design, twist-lock mechanism, and is convenient and quick to use. The steering wheel is a wheel-like device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. The emergence of this newly designed steering wheel introduces a gear system between the driver and the wheels, ensuring flexible operation and effectively isolating intense vibrations from the road.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.