What does it mean when the car engine light is on?

2 Answers
MacKinsley
07/25/25 2:11pm
The reasons for the car engine light being on are: 1. Damaged oxygen sensor; 2. Damaged catalytic converter; 3. Missing or improperly closed fuel tank cap; 4. Damaged thermostat; 5. Aged ignition coil; 6. Faulty air flow sensor. The solution is to immediately visit a professional repair shop for maintenance or replacement. The car engine is the device that provides power to the vehicle, acting as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, hybrid systems, etc.
Was this review help?
3
0
Share
KarterFitz
08/11/25 9:02pm
The car engine light usually indicates that the onboard diagnostic system has detected a fault. This light is an important signal in modern vehicles. Once illuminated, it can be caused by various issues, such as a malfunctioning sensor in the engine, like an oxygen sensor or temperature sensor, leading to the computer misjudging; or an obstructed intake system or insufficient fuel supply, increasing fuel consumption; or even aging ignition coils or carbon buildup. Some situations may cause the car to shake while driving, and in severe cases, it may stall or exceed emission standards. It's best not to ignore it, as the chance of a small issue turning into a major one is not small. Promptly connect an onboard diagnostic tool to check the codes, identify the specific cause, and quickly fix it. Driving with this light on is not a major crisis, but delaying repairs may significantly increase maintenance costs.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What does the 280T in Changan CS75 280T mean?

280T represents the engine torque value, and the T stands for turbocharged engine. Here are specific details about the Changan CS75: 1. Engine: The Changan CS75 is equipped with a Blue Whale series direct-injection turbocharged engine, which utilizes exhaust turbocharging technology and features a direct fuel injection system. 2. Exterior: The new CS75 largely retains the design of the current model, featuring a large front grille and LED headlights adorned with chrome accents. The rear adopts the currently popular full-width light design. The side profile maintains a conventional look, but the wheels have been upgraded to 19 inches.
9
5
Share

Why doesn't Changan support CarPlay?

Changan doesn't support CarPlay because CarPlay requires Apple certification, and Apple chips need to be embedded in the vehicle's infotainment system, which involves considerable difficulty and cost. Here is a brief introduction about Changan: 1. Basic information: Chongqing Changan Automobile Co., Ltd. (CHONGQING-CHANGAN-AUTOMOBILE-Co.,-Ltd, referred to as Changan Automobile) is an automotive company engaged in development, manufacturing, and sales. It originated from the Shanghai Arsenal in 1862 and was officially registered as a company on October 31, 1996. 2. Product types: Its main products include a full range of passenger vehicles, small commercial vehicles, light trucks, minivans, and medium to large buses, as well as a full range of engines. In 1996, it was listed on the Shenzhen Stock Exchange.
15
4
Share

Manual Transmission: Brake First or Clutch First?

Manual transmission vehicles require pressing the clutch first when stopping. Below is relevant information about manual transmissions: 1. Introduction: A manual transmission is a gear-shifting device used to alter the engine's rotational speed and torque transmitted to the drive wheels. It enables vehicles to obtain different traction forces and speeds under various conditions such as stationary starts, hill climbing, turning, and acceleration, while keeping the engine operating within favorable working ranges. 2. Classification and Structure: Manual transmissions consist of gear transmission mechanisms, transmission housing, and control mechanisms. The gear transmission mechanisms can be classified by the number of forward gears or the form of shafts. Based on forward gears, they can be categorized as three-speed, four-speed, five-speed, or multi-speed transmissions; according to shaft forms, they can be divided into fixed-shaft and rotating-shaft types.
17
4
Share

How many degrees should the steering wheel be turned for a right turn in Subject 3?

For a right turn in Subject 3, the steering wheel should be turned when the right front corner of the car is tangent to the roadside (i.e., forming a 180° angle between the right front corner and the roadside) if the turning road is narrow. Below is an introduction to the relevant content of the Subject 3 exam: 1. Exam regulations: The specific subjects of the Subject 3 exam are road driving skills and safety and civilized driving knowledge, with full scores of 100 points each. A score of 90 or above is considered passing. 2. Study hour regulations: Subject 3 consists of a total of 40 study hours, including 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical driving. According to the teaching syllabus, driving training is recorded with a time card, and study hours accumulate. Each student can sign in for a maximum of 4 study hours per day.
5
1
Share

What Causes an Automatic Transmission Vehicle to Suddenly Stall While Driving?

Automatic transmission vehicles may suddenly stall while driving due to battery issues, high-voltage circuit faults, or engine fuel line blockages. Battery Issues: When a battery reaches the end of its lifespan, its capacity and output voltage decrease. This can directly cause starter malfunctions, insufficient voltage, and failure of the engine spark plugs to generate sparks. In severe cases, the engine may stall and become difficult to restart. Solution: Replace the battery. High-Voltage Circuit Faults: Inspect the high-voltage circuits for signs of aging, detachment, short circuits, or open circuits. Engine Fuel Line Blockages: Irregular fuel supply can interrupt the engine's stroke, or severe carbon buildup or erosion in the spark plugs can cause unstable ignition, leading to difficulty starting the engine and abnormal stalling when the throttle changes. Solution: Perform regular cleaning and maintenance of the engine's fuel lines (including both fuel supply and lubrication lines), promptly inspect and replace spark plugs, and if necessary, conduct a carbon removal treatment inside the cylinders.
14
4
Share

What are the effects of turning on the cold air without AC?

Without turning on the AC, air will blow directly from the vents without being cooled, and over time, it will become increasingly hot. Below is an introduction to how the car's air conditioning works for both cold and warm air: 1. How cold air works: Cold air is formed by compressing the refrigerant to liquefy it, which then evaporates and absorbs a large amount of heat from the air. When the cold air is turned on, the compressor's pulley drives the compressor to work, increasing the engine load and consuming a certain amount of fuel. 2. How warm air works: Warm air comes from the heat generated by the engine during operation. After the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car to create warm air. To get cold air in the car, the AC switch must be turned on, which activates the car's compressor to deliver cold air.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.