···
Log in / Register

What does it mean when the car displays 'Please change the engine oil immediately'?

4 Answers
LaBennett
07/24/25 12:42am
The car displaying 'Please change the engine oil immediately' is a reminder to the owner to change the engine oil as soon as possible. At this point, the amount of engine oil has fallen below the standard, and continuing to drive for a long time will damage the engine. Cars usually have an oil dipstick to measure the remaining amount of engine oil. The oil dipstick has two scale lines, H (high) and L (low). When the oil level is below the lower scale line L, the car's warning light will come on, indicating that the owner needs to change the engine oil. During the operation of the car engine, the engine oil plays roles in lubrication, sealing, and cooling, which can reduce friction loss and extend the engine's service life. After driving for a long time, the owner should check whether the engine oil storage in their car is sufficient.
Was this review help?
14
3
Share
PaisleeAnn
08/10/25 8:15pm
The car displays 'Please change engine oil soon', which clearly means your vehicle is reminding you to replace the engine oil promptly. Engine oil acts as the lubricant for the engine, and over time it becomes dirty or depleted, losing its protective properties. If you ignore this warning and continue driving, the engine is prone to overheating or even serious damage, leading to costly and troublesome repairs. I usually pay attention to car maintenance and typically change the oil every 5,000 to 10,000 kilometers, depending on the vehicle model and driving conditions. If you haven't checked it recently, take your car to a professional service center for an oil change and have them inspect the overall condition to avoid related issues. Don't delay—safety first. Addressing it early can save you a lot of hassle. Remember, regular maintenance extends your car's lifespan, and changing the oil is simple and not too expensive.
Was this review help?
17
5
Share
Expand All
StJeffrey
09/24/25 2:25am
Don't panic when you see the 'Change Engine Oil Soon' message on the screen—it means your oil needs replacing, and you should address it promptly. Engine oil is responsible for lubricating and cooling the engine, and after driving a certain number of miles, it becomes old or may leak. I often encounter this alert while driving, usually triggered by the maintenance reminder system. It's advisable to turn off the engine immediately and visit a repair shop for an oil change. Delaying could lead to increased engine wear or even damage, resulting in high repair costs and safety risks. Generally, newer cars have longer maintenance intervals, while older ones require more frequent changes—don't wait for serious issues. It's best to regularly check your oil's condition; if it appears dark or the level is low, it's time for a change. Responding to this alert promptly helps protect your car's performance and reduces the risk of sudden breakdowns.
Was this review help?
18
0
Share
Expand All
McCarter
11/07/25 4:37am
Engine oil is the lifeblood of your car's engine; without it, the engine would be rendered useless. This warning indicates that the oil has degraded to its limit and needs immediate replacement. Under normal driving conditions, engine oil should be changed every few thousand kilometers; otherwise, increased friction will reduce engine efficiency. Having driven many cars, I can attest that ignoring this warning can lead to engine overheating or cylinder scoring, potentially costing thousands in major repairs. Regular oil changes maintain oil cleanliness, resulting in a quieter and smoother-running engine. Don't delay when you see this warning—visit a professional shop the same day for an oil change and have the related circuits checked as well.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What are the differences between the Envision 20T and 28T?

The following are the key differences between the Envision 20T and 28T: 1. Vehicle height: The 20T two-wheel-drive Leading and Elite models are 1660mm, while the 28T four-wheel-drive All-Round Sports Flagship model is 1696mm; 2. Front track: The 28T four-wheel-drive All-Round Sports Flagship model is 1574mm, while the 20T models are all 1584mm; 3. Curb weight: The 20T two-wheel-drive Leading and Elite models are 1575kg, the 20T four-wheel-drive Elite and Luxury models are 1685kg, and all 28T models are 1800kg; 4. Different displacements: The 28T has a 2.0T displacement, while the 20T has a 1.5T displacement. The transmissions are also different: the 28T uses a 6-speed automatic transmission, while the 20T uses a 7-speed dual-clutch transmission. The 20T has two-wheel-drive versions and overall configurations are slightly lower than the 28T.
5
0
Share

What Causes the Increase in Car Exhaust Noise?

If the noise suddenly becomes louder, it can be confirmed that there is a perforation in the exhaust pipe muffler, resulting in a broken sound. Below are the relevant explanations: 1. Muffler structure: The structure of a car muffler is such that after the engine completes its power stroke, the exhaust stroke follows. Exhaust is the process of expelling the waste gas from the cylinder. Since the waste gas at this time is high-temperature and high-pressure, directly discharging it through the exhaust pipe would create significant noise. The muffler is a multi-stage diversion and pressure reduction combination. 2. Muffler noise reduction principle: (1) By utilizing reflections from several interfaces, the originally forward-propagating sound wave returns to its origin and is redirected forward again. This wave meets the second forward-propagating sound wave that has not yet been reflected, and the two waves are equal in amplitude but differ by an odd multiple of 180 degrees in phase, thus canceling each other out through interference. (2) By utilizing sudden changes in the pipe cross-section (i.e., changes in acoustic impedance), the sound waves propagating along the pipe are reflected back toward the sound source, thereby reflecting the sound energy back to its origin.
1
3
Share

What are the differences between the Envision and Envision Plus?

The following is a related introduction about the differences between the Envision S and Envision Plus: 1. Exterior: Although both vehicles adopt the latest design style of the Buick family, overall, the Envision S leans towards a sporty look, while the Envision Plus appears more luxurious. From the side view, the Envision S has a slightly sloping roofline at the rear, giving it a coupe-like feel, whereas the Envision Plus looks more solid with a noticeably straighter D-pillar. 2. Interior: Both vehicles feature the latest Buick family style, with a typical characteristic being the center console tilted towards the driver's side. The materials and craftsmanship meet the standards for vehicles of this class and positioning. The Envision Plus further emphasizes Buick's unique sense of luxury, with extensive soft-touch materials, diamond-pattern decorations, and diamond-textured seats, among other features.
4
3
Share

What is the reason for the unresponsive fuel gauge in a BMW 5 Series?

An unresponsive fuel gauge in a BMW 5 Series may be due to a faulty fuel gauge sensor. Below are the specific reasons and solutions: 1. Specific reason: The fuel gauge needle remains stuck at a certain position and does not move, or even shows an increase in the displayed value after driving a certain distance. This phenomenon occurs because the fuel gauge sensor is malfunctioning. The fuel level sensor detects the position of fuel in the container by measuring the change in capacitance between the sensor housing and the sensing electrode caused by the fuel entering the container, and converts this change into a current variation. 2. Solution: Visit a 4S shop to have a professional technician replace the sensor.
1
5
Share

Where is the car exhaust pipe located?

The car exhaust pipe is installed in the exhaust pipe between the engine exhaust manifold and the muffler. Here is additional information: 1. Introduction: The car exhaust flexible pipe, also known as the car exhaust hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It provides a flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the service life of the exhaust muffler system. 2. Function: The main function of the exhaust pipe is to expel the waste gases from the car's interior. However, improper driving can allow harmful substances to enter the car's interior through the exhaust pipe. Therefore, maintaining the exhaust pipe is, in many ways, equivalent to maintaining the car's interior.
10
5
Share

What is the difference between 330 and 380 engines?

The difference between 330 and 380 engines lies in their power output. Below are the specific distinctions between the two: 1. Power: The 330TSI model is equipped with a low-power 2.0T engine codenamed EA888, with a maximum power of 137kW, maximum torque of 320 Nm, and a maximum power speed of 5000 rpm. This engine features hybrid injection technology and uses an aluminum alloy cylinder head. The 380TSI model is equipped with a high-power 2.0T engine also codenamed EA888, with a maximum power of 162kW, maximum torque of 350 Nm, and a maximum power speed ranging from 4500 to 6200 rpm. This engine employs direct injection technology and also uses an aluminum alloy cylinder head. 2. Torque: The 330TSI model has a maximum torque speed range of 1600 to 4000 rpm, while the 380TSI model has a maximum torque speed range of 1500 to 4400 rpm.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.