What does it mean when the car displays 'nokey'?

2 Answers
MacAdaline
07/28/25 10:00pm
When the car dashboard displays 'nokey', it could be due to the following situations: 1. Low battery in the key. 2. Interference from in-car devices: Heads-up display, navigation, tire pressure monitoring, etc., these devices may interfere with the sensor receiving signals from the key. 3. Sensor malfunction: There are key sensors located in the vehicle's dashboard, under the center console, and under the rear seats, etc. If these sensors malfunction or the connectors become loose, the vehicle may fail to detect the key. 4. Low vehicle battery: If the vehicle's battery is low, it cannot power the vehicle's electrical devices, and naturally, it won't be able to detect the remote key.
Was this review help?
16
2
Share
Cali
08/12/25 2:34am
When I was driving, the dashboard displayed a 'NOKEY' message, which left me puzzled. After checking the manual, I realized it meant the car couldn't detect the key. This could be due to a dead key battery, weak signal, or the car's sensing system failing to receive the signal. Try replacing the battery—last time, it only cost me a little over ten yuan to fix. Other possible reasons include strong magnetic interference near the car or metal objects blocking the signal. The solution is simple: first, bring the key close to the button under the steering wheel, or restart the key system. If that doesn't work, it might be a fault in the receiver module, requiring a professional inspection. I've since made it a habit to replace the key battery annually to avoid such embarrassments. Safety first—don't let small issues delay your drive.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Can Vehicle Ownership Transfer Be Completed in One Day?

Local vehicle ownership transfer can be completed in one day. According to the standard procedure, it takes 2 to 5 hours to complete. Documents required for vehicle ownership transfer: 1. Original owner's ID card, new owner's ID card, original and duplicate of the vehicle license, purchase tax invoice; 2. Vehicle and vessel tax certificate, vehicle registration certificate, vehicle inspection certificate for criminal investigation, and insurance policy, all of which must be provided in original copies; 3. Both parties involved and the vehicle must be present at the vehicle management office in the city where the vehicle is registered to apply for the ownership transfer procedure. Vehicle ownership transfer refers to changing the name of the vehicle's owner. When buying a used car, besides checking the car's condition, another crucial step is completing the ownership transfer procedure.
12
5
Share

Does passing through when the green light flashes and turns yellow count as running a red light?

Whether passing through when the green light flashes and turns yellow counts as running a red light depends on two situations: 1. If the vehicle has already crossed the stop line when the yellow light turns on, it can continue to pass and does not count as running a yellow light; 2. If the vehicle has not crossed the stop line when the yellow light turns on and forces its way through, it will be considered as running a red light. Running a red light refers to the behavior of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. Running a red light once results in a deduction of 6 points and a fine of 200 yuan. According to the new regulations on running red lights, it is only considered as running a red light if the vehicle is within the stop line, then passes through the stop line and the entire intersection.
7
4
Share

Where does the Cangshuo Expressway run from and to?

Cangshuo Expressway connects Cangwu District in Wuzhou City, Guangxi Province to Shuolong Town in Daxin County, Chongzuo City, Guangxi Province. It is a provincial-level expressway, with most sections currently under construction while some segments have already been opened to traffic. The traffic violation monitoring points from kilometer 7 to kilometer 21 of Cangshuo Expressway are located in Chaozhou City, Guangdong Province. If violations occur, they should be handled at the local vehicle management office in Chaozhou City, Guangdong Province. Expressways are multi-lane roads exclusively designed for directional and lane-segregated vehicle traffic with full access control. The average annual daily traffic volume for expressways should ideally exceed 15,000 passenger car units, with design speeds ranging from 80 to 120 kilometers per hour.
1
2
Share

Is there an overtime fee for private cars on highways?

Private cars do not incur overtime fees on highways; they are charged based on mileage. The highway overtime fee refers to a penalty measure implemented to combat toll evasion by drivers, applicable when a vehicle spends more than 24 hours within the highway network or more than 12 hours on the same highway route. The concept of time limits on highways is calculated by dividing the distance between highway entry and exit points by the minimum speed limit, primarily aimed at improving road usage efficiency and preventing toll evasion. If a vehicle suddenly breaks down during the journey, relevant maintenance records should be retained. In cases where repairs are done without third-party verification, a short video can be recorded during the repair process, ensuring to capture prominent roadside signs. This way, even without third-party documentation, one can prove their innocence when exiting the highway.
7
5
Share

How to Read the Oil Dipstick?

Turn off the engine and wait for 5 minutes before opening the engine compartment. Pull out the yellow cap to extract the oil dipstick, wipe it clean, reinsert it, and then pull it out again to see the oil level mark left on the dipstick. Below are the detailed steps for changing the engine oil: 1. Warm up the car before oil change: Start the vehicle and let the coolant temperature reach normal operating levels, then turn off the engine. The purpose of warming up the car is to allow the oil to flow freely and carry out impurities. Use a jack to lift the vehicle and engage the handbrake. 2. Drain the old oil: Use the onboard tools to loosen the oil pan drain plug and let the oil flow out. Ensure to collect the old oil in a container to avoid environmental contamination. Once the oil is fully drained, reinstall the drain plug, being careful not to overtighten it to prevent damage to the oil pan. 3. Install the new oil filter: Use an oil filter wrench to loosen the old filter. Apply new oil to the rubber seal of the new filter, then manually install it and tighten it with the tool. 4. Refill with new oil: Pour the new oil into the oil filler port, using a funnel if necessary. After refilling, check for any leaks. If no abnormalities are found, remove the jack and lower the vehicle. Use the oil dipstick to confirm the oil level, restart the vehicle, and check if any warning lights are illuminated.
17
1
Share

What are the three modes of the Audi Q5L air conditioning system?

The three modes of the Audi Q5L air conditioning system are Auto Mode, Cooling Mode, and Heating Mode. Below is a partial introduction to car air conditioning systems: 1. Automatic Air Conditioning: The electronic control unit will operate the air conditioning system automatically based on the settings made by the driver or passengers via buttons on the air conditioning display control panel. It adjusts the air supply temperature and speed in real-time according to signals from various sensors to maintain the optimal air environment inside the vehicle. 2. Traditional Air Conditioning: This is manually controlled. There is a temperature adjustment knob on the air conditioning control panel, and rotating it changes the set temperature.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.