What does it mean when the car body sweeps the line in the reverse parking test of Subject 2?

1 Answers
VanKiara
07/29/25 8:59pm
Body sweeping the line means the car body crosses the line, which results in a 100-point deduction and failure of the current test. Other actions that also lead to a 100-point deduction include the car body crossing the line, not entering the parking space, stopping midway, not following the prescribed route or sequence, and exceeding the time limit. The full score for both subjects is 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The rules for the Subject 2 driving test state that stopping midway, rolling back, or not following voice prompts will result in failure. Additionally, the wheels or car body crossing the line will also lead to failure. Many learners encounter the issue of crossing the line during Subject 2 training, with "crossing the line" being the most common reason for failure. The main cause of crossing the line is learners not mastering the correct timing for steering. Apart from missing the right moment to steer, another reason could be the steering speed not matching the car's speed. Subject 2 Deduction Standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, changing lanes, overtaking, turning, and parking); turn signals not used for more than three seconds (this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the prescribed route sequence: 100-point deduction. Car body crossing the line: 100-point deduction. Not completing the parking: 100-point deduction. Before reversing, if both front wheels do not pass the control line: 100-point deduction. Exceeding the 210-second time limit: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction each time. Slope Parking and Starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm: 10-point deduction. After stopping, if the starting time exceeds 30 seconds: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, if the car body is more than 50 cm from the road edge line: 100-point deduction. After parking, not tightening the parking brake: 10-point deduction each time. After stopping, if the car body is more than 30 cm but less than 50 cm from the road edge line: 10-point deduction each time. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction each time. Parallel Parking: After parking, if the car body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when parking: 10-point deduction. Exceeding the 90-second time limit: 100-point deduction. Car body touching the parking space line while driving: 10-point deduction each time. Wheels touching the lane line while driving: 10-point deduction each time. Stopping for more than 2 seconds midway: 5-point deduction each time. 90-Degree Turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction each time. Curve Driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not driving in second gear or higher: 5-point deduction.
Was this review help?
10
4
Share
More Forum Discussions

What is the best engine oil for the Fit?

The Fit is recommended to use the genuine Honda engine oil: Green Can SN-0W-20 grade. More information about the Fit is as follows: 1. The third-generation Fit is the first to be equipped with Honda's new EDT engine, a 1.5L direct-injection DOHC-i-VTEC engine, CVT continuously variable transmission, Idle-stop engine energy-saving automatic start-stop system, VSA vehicle stability control system, three-mode rearview camera display system, ESS emergency brake warning system, HSA hill start assist system, and intelligent screen interconnection system, among ten leading advanced technologies in its class. 2. The third-generation Fit adopts Honda's new "Earth Dreams Technology" powertrain system, maintaining high power output while reducing fuel demand.
10
1
Share

Can a Temporary Vehicle License Plate Be Used Outside the City?

Whether a temporary vehicle license plate can be used outside the city depends on the color of the plate: 1. A blue temporary license plate is an administrative jurisdiction temporary plate, which is only for motor vehicles driving within the city and cannot be used outside the city; 2. A brown-yellow temporary license plate can be used for motor vehicles traveling across regions. The materials required for applying for a temporary license plate include: 1. The identity certificates of the motor vehicle owner and the agent; 2. The origin certificate of the motor vehicle; 3. The complete vehicle factory certificate for domestically produced motor vehicles, or the import certificate for imported motor vehicles; 4. The vehicle identification code and engine number rubbing mold. There are two temporary license plates in total, one should be affixed to the lower left or right corner of the front windshield, and the other should be affixed to the lower left corner of the rear windshield.
19
5
Share

Where is the license plate Ji N from?

Ji N is the license plate for Baoding, Hebei Province. Ji is the abbreviation for Hebei Province. The license plate codes for Hebei Province are: Ji A for Shijiazhuang, Ji B for Tangshan, Ji C for Qinhuangdao, Ji D for Handan, Ji E for Xingtai, Ji F for Baoding, Ji G for Zhangjiakou, Ji J for Cangzhou, Ji O for provincial government agencies, Ji R for Langfang, and Ji T for Hengshui. License plates are used for numbering and registering vehicle information. Their main purpose is to identify the region to which a vehicle belongs and to trace the owner and registration details of the vehicle based on the license plate. The steps for installing a license plate are: 1. Screw in all the screw components at the fixed points for the license plate; 2. Once the license plate is properly positioned, tighten all the screws; 3. Align the cap with the spacer, press it in, and secure it in place.
20
5
Share

What car brand features an 'S' inside a triangle?

A triangle with an 'S' inside represents the DS Automobiles brand, which is a premium luxury car brand under the PSA Group (Peugeot Citroën). DS Automobiles offers models such as the DS 3, DS 4, DS 5, DS 6, and DS 7. Taking the 2020 DS 7 as an example, its body dimensions are: length 4603 mm, width 1891 mm, height 1626 mm, with a wheelbase of 2740 mm, a fuel tank capacity of 60 liters, and a trunk capacity of 550 liters. The 2020 DS 7 is equipped with a 1.6L turbocharged engine, delivering a maximum power of 133 kW at 5500 rpm and a maximum torque of 250 Nm, paired with an 8-speed automatic transmission.
18
2
Share

How to Fold the Rearview Mirror of Buick Envision?

There are two buttons on the driver's side door handle of the Buick Envision, one with the letters L and R, and the other is a four-way navigation key. Place the L and R key in the middle position and press the navigation key downward to achieve automatic folding of the rearview mirror. Below are the details of the Buick Envision: 1. The body dimensions of the Envision are 4686mm, 1839mm, and 1660mm, with a wheelbase of 2750mm. 2. The Envision is equipped with a 2.0T SIDI direct-injection turbocharged engine and a 1.5T SIDI direct-injection turbocharged engine. The former has a maximum power of 191kw and a maximum torque of 400nm; the latter has a maximum power of 124kw and a maximum torque of 250nm.
10
2
Share

What are the main components of engine oil?

Engine oil is primarily composed of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties; additives compensate for and improve the shortcomings of base oil performance, imparting certain new characteristics, making them an essential part of lubricating oil. The following is an introduction to engine oil: 1. Engine oil is the lubricating oil used in engines, consisting of base oil and additives. 2. As a type of machinery, engines have common requirements for lubricating oil similar to general machinery, such as appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. 3. The density of engine oil is approximately 0.91×10³ (kg/m³), and it serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.