What does it mean when the brake assist system is restricted?

1 Answers
DeJonathan
07/30/25 2:57am
Brake assist system restricted refers to the failure of the brake assist system, requiring inspection of the vacuum pump or pipelines for any air leaks. Below is an introduction to the brake system: 1. Introduction: A series of specialized devices that can forcibly reduce the speed of a vehicle. The brake system mainly consists of four parts: the energy supply device, control device, transmission device, and brake. 2. Function: The main functions of the brake system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving. 3. Classification: Service brake system, parking brake system, and auxiliary brake system.
Was this review help?
15
4
Share
More Forum Discussions

How to set the locking sound for the Leiling?

Leiling does not have a locking sound, and it cannot be activated. The hazard lights will flash after locking the car. It is a good habit to pull the door handle again after locking to ensure the doors are properly secured. If the doors are not locked properly or are interfered with by electromagnetic waves, items may be easily lost. Introduction to the Leiling: 1. Exterior: The front face features a three-dimensional design, and the low-profile body styling enhances its sporty appearance. 2. Interior: It adopts a previous design layout, with a simple and stylish center console paired with a floating touchscreen, giving the overall layout a high-tech feel. 3. Powertrain: It offers both fuel-powered and hybrid versions. The fuel-powered version is equipped with a 1.2T engine with a maximum power output of 85 kW.
16
3
Share

Where is the OBD port located on a Chery A3?

Chery A3's OBD port is located inside the small storage compartment below the steering wheel. Here is some relevant information: Exterior design: The Chery A3 features well-proportioned body dimensions and smooth line design. The launch of Chery A3 marked Chery's official entry into the second development phase of creating international brand recognition. As a key strategic model heavily invested by Chery, the A3 represents the culmination of Chery's vehicle manufacturing experience and signifies the beginning of Chery's transition from extensive operation to refined management. Configuration: One notable feature of Chery A3's configuration is the inclusion of ESP (Electronic Stability Program). Although not standard across all variants, Chery has taken the lead among both domestic and joint-venture brands in this aspect.
2
5
Share

What Causes the Bumping and Abnormal Noise from the Front Left Wheel of a Car?

If there is abnormal noise from the front left wheel, it may be due to increased play in the front left suspension or a malfunction in the front left shock absorber. Here are some specific details about car maintenance: 1. Antifreeze Usage Tips: It is best to use antifreeze all year round. In addition to its antifreeze and cooling functions, antifreeze also has cleaning, rust removal, and anti-corrosion effects, reducing corrosion in the radiator and protecting the engine. Pay attention to choosing the correct color of antifreeze and avoid mixing different types. 2. Brake Fluid Usage Tips: The performance of the braking system is closely related to the brake fluid. When inspecting or replacing hardware such as brake pads and brake discs, do not forget to check whether the brake fluid needs to be topped up or replaced.
17
3
Share

What is the reason why the MG6 does not move when in gear?

MG6 does not move when in gear due to gear shift mechanism failure or transmission oil deterioration. The specific reasons and solutions are as follows: Gear shift mechanism failure: The gear shift mechanism is located inside below the gear lever, which detects gear information and transmits it to the transmission unit. If the gear information cannot be transmitted to the transmission unit through the gear shift mechanism, the vehicle will not move even when in gear. The solution is to replace the gear shift mechanism. Transmission oil deterioration: Transmission oil is mainly for power transmission between the transmission and the engine, extending the service life of the transmission. If the transmission oil is used for a long mileage, it will deteriorate. After deterioration, the transmission cannot regulate oil pressure, resulting in the problem of the vehicle not moving when in gear. The solution is to replace the transmission oil.
12
3
Share

How to Connect Jumper Cables Between Cars?

Here is the correct method for jump-starting a car: 1. First, ensure the auxiliary battery is 12V and its negative terminal is grounded. Of course, we should also turn off all unnecessary lights and accessories to prevent electrical accidents. 2. Connect the cables correctly, making sure not to reverse the positive and negative terminals. Otherwise, sparks may fly when connecting. Additionally, ensure the cables are tightly wrapped around the battery terminals (for full contact) to avoid sparking during the jump-start process. 3. Start the engine of the car with the auxiliary battery and let it run at medium speed. Then, start the engine of the car with the depleted battery. 4. Finally, disconnect the cables in the exact reverse order of connection.
6
0
Share

What documents are needed to obtain the exemption inspection?

You need to bring the vehicle registration certificate, the owner's ID card, the compulsory traffic insurance policy, and ensure all traffic violations have been settled. With these documents prepared, you can go to the vehicle management office to apply for the exemption inspection label. Before applying, make sure all required materials are ready to avoid wasting time. Additional information is as follows: 1. Vehicle exemption inspection: This refers to exempting eligible vehicles within six years from the on-site inspection process, requiring only a biennial application for the inspection label to be affixed to the vehicle as per regulations. Essentially, it exempts the vehicle from on-site inspection. As long as the vehicle meets the national policy conditions, there's no need for on-site inspection; you can directly apply to the traffic management department for the inspection label. 2. Types of vehicles eligible for exemption inspection: Non-commercial cars and other small and mini vehicles, including vans (excluding vehicles with 7 seats or more) within six years.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.