What does it mean when the ASR light comes on in a car?

1 Answers
DiEmersyn
07/29/25 11:47pm
ASR stands for Anti-Slip Regulation system, which is an active safety device in vehicles. The ASR warning light may illuminate for the following reasons: 1. Maintenance or removal of tires may cause the ASR warning light to come on. 2. Insufficient tire pressure or a tire leak, which is a relatively common cause of the ASR warning light, requires checking whether the tires are leaking or underinflated. 3. In colder climates, the vehicle's traction may decrease, especially on icy roads causing wheel slip, which can also trigger the ASR warning light. 4. If the vehicle is equipped with an ABS system, it may also cause an ASR fault.
Was this review help?
9
4
Share
More Forum Discussions

What are the symptoms of a bad spark plug?

Symptoms of a bad spark plug include: 1. Difficulty starting or sudden stalling: Insufficient ignition energy, or even failure to generate high voltage, preventing the ignition of the air-fuel mixture in the cylinder, making the car unable to start. Even if it starts, it may stall suddenly; 2. Lack of power and excessive exhaust emissions: This leads to incomplete combustion of the air-fuel mixture in the engine, resulting in insufficient power, increased fuel consumption, black smoke from the exhaust pipe, and harmful substances being emitted without being fully burned, causing excessive exhaust emissions. When you notice that the spark plug electrode is melted, eroded and rounded, or the insulator has scars, cracks, or carbon deposits, these are signs that the spark plug is damaged. Although the car may still run for a short time, it is advisable to replace the spark plug promptly, as a damaged spark plug can have significant negative effects.
12
3
Share

Where is the vehicle license plate with 'Ba K' from?

Currently, there is no vehicle license plate with 'Ba K'. A license plate is a mandatory item for every vehicle to legally drive on the road. Driving without a license plate is considered illegal. License plates can be temporary or permanent. Temporary plates are made of paper and need to be affixed to the inside of the front and rear windshields. Temporary plates have an expiration date, and driving with an expired temporary plate is equivalent to driving without a license plate. Permanent plates are made of metal and must be secured to the front and rear of the vehicle using anti-theft screws. They also come in different colors, with different types of vehicles requiring different colored permanent plates. Most large buses and trucks require yellow plates, while ordinary household vehicles require blue or green plates.
11
5
Share

What is the reason for the Citroen C4L's one-button start not responding?

Citroen C4L's one-button start not responding may be due to a dead battery. Here is a related introduction to the Citroen C4L: 1. In terms of appearance, the length, width, and height are 4675mm, 1780mm, and 1500mm respectively, with a wheelbase of 2710mm. 2. In terms of power: It is equipped with a 1.6THP turbocharged engine. The technical features of direct fuel injection up to 120bars, Twinscroll twin-scroll single turbo technology, and CVVT continuous variable intake timing technology make the 1.6THP turbocharged engine suitable for urban driving conditions, allowing the "T" technology to be fully utilized. It provides high torque at low RPMs, with the turbo starting to engage at 1000 RPM and reaching the maximum torque peak of 240 Nm at 1400 RPM.
17
1
Share

What Are the Reasons for Car Bluetooth Connection Failure?

Reasons for car Bluetooth connection failure may include the mobile device being out of the car Bluetooth's communication range, incompatibility between the mobile system and the car Bluetooth system, instability of electronic devices, or the mobile Bluetooth having connection records with other devices. Reasons and solutions for car Bluetooth connection failure: The current mobile device is out of the car Bluetooth's communication range, being too far away to receive the signal. Solution: Move closer to the car Bluetooth and reconnect. The current mobile system is incompatible with the car Bluetooth system, causing frequent signal interruptions. Solution: Upgrade the mobile system to the latest version and try connecting again. Due to the instability of electronic devices. Solution: It is recommended to restart the mobile phone and reconnect. The mobile Bluetooth has connection records with other devices. Solution: It is recommended to delete previously connected Bluetooth devices.
9
2
Share

What is the difference between diesel and gasoline?

Differences between diesel and gasoline: 1. Different volatility: Diesel is difficult to volatilize; gasoline has strong volatility. 2. Different reactions with air: The mixture of diesel and air is uneven, resulting in local hypoxia or local oxygen enrichment; gasoline easily mixes with air and the mixture is not easily separated. 3. Chemical differences: Diesel contains more carbon atoms, ranging from 12 to 15; gasoline contains fewer carbon atoms, ranging from 8 to 10. 4. Different combustion methods: Due to its high carbon content, diesel requires more air and is not easily ignited by spark plugs, so a compression ratio of 15 to 18 times is needed to compress the diesel mixture for combustion; gasoline molecules are smaller, more active, and have a lower ignition point. In gasoline engines, mixing with an ideal proportion of air and compressing to around 10 before ignition by the spark plug is the ideal state.
11
0
Share

What Causes Gear Shifting Jerkiness in Mercedes-Benz C-Class Transmission?

Mercedes-Benz C-Class transmission jerkiness can be categorized into upshift jerkiness, downshift jerkiness, etc. The details are as follows: Upshift Jerkiness: This occurs because the transmission's response speed is not fast enough, and the upshift speed cannot keep up with the throttle pedal input. At the moment of gear shifting, the transmission experiences jerkiness. Downshift Jerkiness: This happens due to the intervention of the energy recovery system. Once the driver releases the throttle pedal or presses the brake pedal, the generator immediately starts working, imposing some load on the engine and affecting its speed. This causes a mismatch between the engine speed and the clutch disc speed, resulting in a jerky sensation. Low-Speed Jerkiness: During low-speed driving, the transmission frequently shifts between first and second gears, causing the clutch to continuously engage and disengage. The power transmission cannot be smoothly completed in a short time, leading to common low-speed jerkiness. Jerkiness is often felt during startup and low-speed driving, usually when the turbocharger engages at low RPMs, affecting the engine speed.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.