What does it mean when the appointment for Subject 2 test shows 'not attended training'?

1 Answers
Grace
07/30/25 10:00am
It means that the applicant for driver's license training has not completed the required training hours for Subject 1, Subject 2, and Subject 3. Only after completing these can they schedule the test. Duration: Subject 1 training requires 12 sessions, Subject 2 requires 16 sessions, Subject 3 road driving training must cover at least 300 kilometers and 24 sessions, and Subject 4 (safe and civilized driving) requires 10 sessions. Each session lasts 60 minutes, with effective training time not less than 45 minutes. The total training hours for C1 and C2 licenses are 62 and 60 hours respectively, both about 10 hours less than previous requirements. Each session is 60 minutes, with effective teaching time not less than 45 minutes. Each trainee's daily classroom learning and practical operation time must not exceed 4 sessions. Standards: The timing for Subject 1 system learning starts the training clock. For Subjects 2 and 3, system check-in photos plus training mileage are required—none can be omitted. Failure to meet these standards will prevent the applicant from scheduling the test.
Was this review help?
6
2
Share
More Forum Discussions

Does the 2700 Prado have a differential lock?

The Prado 2700 does not come standard with a differential lock. Below is more information about differential locks: 1. Different differentials use different locking methods. Common differential locks include the following types: forced locking, high-friction self-locking, jaw-type, Torsen, and viscous coupling. 2. A central differential lock is a locking mechanism installed on the central differential, used in four-wheel-drive vehicles. Its purpose is to improve the vehicle's ability to traverse poor road conditions. When one drive axle spins freely, it can quickly lock the differential, turning the two drive axles into a rigid connection. This allows most or even all of the torque to be transferred to the non-slipping drive axle, fully utilizing its adhesion to generate sufficient traction and keep the vehicle moving. 3. A forced-locking differential lock is installed on a standard symmetrical bevel gear differential and has a high torque distribution ratio, but its operation is not very convenient.
3
0
Share

What to Do When the Brake Light of BYD S6 Stays On?

Solution for the brake light of BYD S6 staying on: promptly visit a repair shop or 4S store for professional inspection and maintenance to prevent affecting the normal use of the vehicle. Below is more information about BYD S6: 1. BYD S6 is a mid-size SUV produced by BYD Auto, with dimensions of 4810mm in length, 1855mm in width, and 1680mm in height, a wheelbase of 2720mm, and a minimum ground clearance of 190mm, providing excellent off-road capability. 2. In terms of power, BYD S6 is equipped with three engine options: 1.5T, 2.0L, and 2.4L, available in four variants: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Deluxe, featuring either the BYD483QB or Mitsubishi 4G69 engine.
3
3
Share

How often should the Jetta battery be replaced?

Jetta car batteries should be replaced every four years. Below is some information about car batteries: 1. Car batteries have a certain usage cycle: Under normal circumstances, after 2-3 years of use, the car battery will show signs of aging. The lifespan of the car battery is directly related to the driver's usage habits and maintenance of the vehicle. 2. If the car is left unused for a long time, the battery's charge will gradually decrease, making it difficult to start the car when you try to use it again. 3. Before connecting jumper cables to the Glory RX5 battery, always turn off the engine first. After connecting the cables, ensure that the positive and negative terminals do not come into contact to avoid short circuits. When removing the jumper cables, always disconnect the negative terminal first, followed by the positive terminal.
2
3
Share

What is the 0-100 km/h acceleration time of the Leiling?

The 0-100 km/h acceleration time of the Leiling is 12.97 seconds, while the hybrid version accelerates from 0-100 km/h in approximately 12.8 seconds. Here is more information about the Leiling: 1. The Leiling is a compact sedan under Toyota, with dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. 2. The Leiling is equipped with a 1.2-liter turbocharged engine, delivering a maximum power of 116 kW and a maximum torque of 185 Nm. The engine reaches its maximum power at 5200-5600 rpm and its maximum torque at 1500-4000 rpm. It features VVT-iW technology and uses an aluminum alloy cylinder head and block.
13
5
Share

What type of engine oil is recommended for the eighth-generation Accord?

The official manual for the eighth-generation Accord recommends engine oil with a specification of 5W-30. Any oil that meets this specification can be used. For later maintenance and oil changes, you can choose brands such as Shell, Mobil, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in an eighth-generation Accord is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover. Typically, fill up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the oil dipstick to check if the oil level is within the standard range.
5
3
Share

What is the normal oil pressure for a Lexus UX?

Lexus UX gasoline engine oil pressure varies depending on the age of the engine. For a new car, when the engine is at normal temperature and idling, the pressure should not be lower than 1.5 MPa; during normal driving, it should not be lower than 4 MPa. For an older car, the oil pressure is usually slightly lower than that of a new car. Below is relevant information about oil pressure: 1. If the oil pressure is too low, it will disrupt the engine's lubrication conditions, leading to poor lubrication, cooling, and cleaning, which can cause parts to stick and wear. Excessive clearance between the crankshaft main journal and connecting rod journal and bearings, low oil viscosity, and a ruptured filter element can all result in low oil pressure. 2. If the oil pressure is too high, it can also disrupt normal lubrication conditions. For example, excessive oil viscosity, deteriorated or gelled oil, clogged filter element and oil passages, and improperly adjusted or stuck pressure relief valves can all cause excessively high oil pressure.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.