What does it mean when the AdBlue light comes on?

What Causes the High-Pitched Squealing Sound When Braking?

The reasons for high-pitched squealing sounds when braking: 1. The wear indicator emits a sharp noise as a replacement reminder: Most vehicle braking systems are equipped with a warning mechanism to alert drivers to replace brake pads. When the brake pads wear beyond the designated warning threshold, the wear indicator produces a piercing noise to prompt the owner to inspect or replace the brake pads at a service center. Failure to replace them promptly may result in the metal wear indicator scoring fatal grooves into the brake disc, rendering it unusable. Additionally, excessively worn brake pads can lead to brake failure, potentially causing severe accidents. 2. Severely worn brake discs causing noise: If the brake disc is heavily worn, the outer edge beyond the contact area with the brake pad may develop a raised ridge relative to the friction surface. When the corner of the brake pad rubs against this raised edge of the brake disc, it can generate noise. There are generally two solutions: either have the edges of the brake pads ground down at a service center to avoid contact with the raised disc edge, or opt for a complete brake disc replacement. 3. High-pitched squealing during braking in new vehicles: Many owners assume this indicates a manufacturing defect when they hear sharp noises during braking in new cars. However, this is often part of the break-in process between new brake pads and discs. The noise occurs when braking happens to contact a hard spot in the brake pad material. Applying lubricant at a service center can help reduce this noise.

4

Share

What are the reasons for the engine fault light in Jetta VS5 to illuminate?

When there is a malfunction in the engine or related components, the engine fault indicator light on the car's dashboard will illuminate, serving as a preventive measure. Generally, the main reasons for the engine fault light to illuminate include the following. 1. Sensor issues: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine fault light. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light illuminating. Vehicles have specific maintenance cycles, and if the owner does not adhere to these schedules, combined with poor driving habits, it will increase the burden on the engine's operation, eventually prompting the fault light to remind the owner to pay attention to the car. 3. Fuel quality issues: The fuel quality mentioned here includes both fuel and engine oil. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of engine oil to use. If the owner does not follow these recommendations, prolonged use can lead to engine wear. 4. Poor combustion of the air-fuel mixture: Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Poor combustion leads to engine carbon buildup or knocking issues, which are eventually detected by the engine's oxygen sensor and reported to the ECU, naturally causing the fault light to illuminate as a warning. 5. Air intake issues: The engine requires air intake during combustion, making the air filter element crucial in this process. If the car's air filter is not clean and not regularly cleaned, it can affect the car's air intake. Over time, this can lead to clogging, and in severe cases, cause the engine fault light to illuminate.

5

0

Share

Does a Dual Clutch Belong to Automatic Transmission?

Dual clutch belongs to automatic transmission. The specific introduction about dual clutch is as follows: 1. Dual clutch is a mechanical automatic transmission: it does not have a clutch pedal. 2. Dual clutch transmission is different from ordinary automatic transmission systems: it is based on manual transmission but belongs to automatic transmission. In addition to the flexibility of manual transmission and the comfort of automatic transmission, it can also provide uninterrupted power output. 3. Automatic transmission means that the driver does not need to shift gears manually: the vehicle will automatically select the appropriate gear according to the driving speed and traffic conditions.

4

2

Share

Where is the location to add windshield washer fluid in a car?

The replacement of a car's carbon canister solenoid valve does not have a fixed interval. If the carbon canister solenoid valve is not damaged, there is no need to replace it with a new one. The car's carbon canister is usually located between the fuel tank and the engine. It absorbs and filters gasoline vapors inside the fuel tank. The solenoid valve controls the entry of fuel vapors into the engine for combustion, thereby reducing fuel consumption and preventing excessive pressure in the fuel tank. When the car starts, the solenoid valve controls the opening of the activated carbon canister, allowing the absorbed fuel vapors to be reintroduced into the intake manifold for combustion. If the carbon canister solenoid valve is damaged and cannot open or close the canister, it may prevent fuel vapors from entering the cylinders for combustion. If it fails to close and remains in a constantly open mode, it may cause the air-fuel mixture to become too rich, leading to incomplete combustion. Most of the unburned fuel is expelled from the vehicle, resulting in fuel waste and increased fuel consumption. If the solenoid valve frequently remains closed, gasoline vapors in the carbon canister may accumulate and eventually overflow, potentially causing environmental pollution.

16

0

Share

What is the difference between H1 and H7 bulbs?

The most crucial difference between automotive bulbs H1 and H7 is the number of terminals they have. Here are some important points to note when replacing car lights: 1. The replacement bulbs should not be too bright. If you install lenses or change the color, you must register the changes with the vehicle management office in advance; otherwise, the vehicle will not pass the annual inspection. 2. It is best to replace the lights with original factory ones to ensure better quality. Automotive bulbs come in the following models: 1. H1 is a single-filament, single-terminal bulb, mostly used for high beams. 2. H7 is a single-filament, double-terminal bulb, mostly used for low beams. 3. H3 is a special type, generally used in Japanese cars and rarely in other vehicles. 4. H4 is a dual-filament, triple-terminal bulb, combining both low and high beams in one bulb.

5

2

Share

What Does the Orange Exclamation Mark on the Car Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and windshield wiper fault indicator light. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, and engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or that the transmission lubricant is below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: An exclamation mark below a horizontal line with parentheses represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator light, signaling a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors, yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to a repair shop to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over safely and seek professional assistance to prevent unforeseen dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate for an automatic system check and will turn off after the check is completed. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and eliminate safety hazards.

12

0

Share

What does it mean when the AdBlue light comes on?

What Causes the High-Pitched Squealing Sound When Braking?

What are the reasons for the engine fault light in Jetta VS5 to illuminate?

Does a Dual Clutch Belong to Automatic Transmission?

Where is the location to add windshield washer fluid in a car?

What is the difference between H1 and H7 bulbs?

What Does the Orange Exclamation Mark on the Car Mean?

Should You Signal or Brake First When Turning in Subject 3?

What to Do When the EA888 Engine Cooling System is Insufficient?

Can the EA211 spark plug not use double platinum?

Why is the steering wheel locked and the key unable to turn?