What does it mean when Tesla has no brakes?

Is the Volkswagen Sagitar a Joint Venture Car?

Volkswagen Sagitar is a joint venture car. Here is a brief introduction: 1. The Sagitar is a compact car under FAW-Volkswagen, which has been well received by many consumers since its launch. 2. The dimensions of the new Sagitar are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. 3. The new Sagitar is equipped with two engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. Below is an introduction to the two engines used in the Volkswagen Sagitar: (1) The 1.2-liter turbocharged engine has a maximum power of 85kw and a maximum torque of 200 Nm. The maximum power speed ranges from 5000 to 6000 rpm, and the maximum torque speed ranges from 2000 to 3500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. (2) The 1.4-liter turbocharged engine has a maximum power of 110kw and a maximum torque of 250 Nm. The maximum power speed ranges from 5000 to 6000 rpm, and the maximum torque speed ranges from 1750 to 3000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.

9

4

Share

What to Do When the Parking Brake of BMW 5 Series Fails?

It is necessary to reset the electronic parking brake. The specific steps are as follows: 1. Turn on the car key. 2. Press the foot brake. 3. Press down the electronic handbrake for 5 seconds and then pull up the electronic handbrake for 5 seconds. 4. This will reset the initialization of the electronic parking brake. Information about the electronic handbrake is as follows: 1. The electronic handbrake, also known as the electronic parking brake system, integrates the temporary braking during driving and the long-term braking after parking, and realizes the parking braking technology through electronic control. 2. The electronic handbrake is a technology that realizes parking braking through electronic control. Its working principle is the same as that of the mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and the brake pad. 3. The electronic handbrake extends from the basic parking function to the automatic parking function AUTO-HOLD. The application of the AUTO-HOLD automatic parking function technology allows the driver to not need to brake for a long time when the vehicle stops. And when the automatic electronic parking brake is activated, it can avoid unnecessary sliding of the vehicle. Simply put, the vehicle will not roll backward.

9

3

Share

What does '4WD Overheating Temporarily Inactive' mean?

It indicates an overheating alarm from the electronic coupler of the four-wheel-drive transmission, which triggers this warning on the car's dashboard. Here is some information about 4WD: 1. Applicable Models: In the past, four-wheel drive was mainly used in off-road vehicles, but now it is also found in urban SUVs, as well as many mid-to-high-end sedans and luxury sports cars. 2. Three Types: These include full-time 4WD, part-time 4WD, and on-demand 4WD. (1) Full-time 4WD: Vehicles equipped with this system always operate in four-wheel drive. This system is commonly found in luxury SUV models such as the BMW X5 and Audi Q7. (2) Part-time 4WD: This system allows switching between four-wheel drive and two-wheel drive via an in-car switch. Most off-road vehicles with part-time 4WD have a low-range four-wheel-drive function, which further amplifies wheel torque to help the vehicle escape tough situations. Examples include the Toyota Land Cruiser Prado and Jeep Wrangler. (3) On-demand 4WD: This system is typically used in urban SUVs or some front-wheel-drive cars with transverse engines. Normally, these vehicles operate in front-wheel drive, and power is distributed to the rear wheels only when the front wheels slip or during hard acceleration.

12

3

Share

What Causes the Engine Warning Light with an Exclamation Mark?

An exclamation mark inside the engine symbol represents the engine warning light. There are primarily seven reasons why it illuminates: Sensor Malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel or Oil Quality Issues: Failure to use the fuel or engine oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor Combustion of Air-Fuel Mixture: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light activates as a caution. Spark plug failure, ignition coil issues, fuel pump malfunction, or clogged fuel lines can all contribute to poor combustion. Turbocharger Problems: Issues with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common cause is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: Blockages in the engine's intake system can lead to the warning light illuminating. A dirty or uncleaned air filter can cause intake problems. Exhaust System Problems: Exhaust faults may also activate the engine warning light. Common causes include rear oxygen sensor failure, catalytic converter issues, or faults in the exhaust camshaft and bearings. The catalytic converter is particularly vulnerable to damage from leaded gasoline, certain lubricant additives, physical impacts, or fuel system malfunctions. Anti-Theft System Fault: If the vehicle's electronic anti-theft system malfunctions or if there's a mismatch between the anti-theft controller and the engine ECU, the system may prevent normal engine operation and trigger the warning light. If the engine warning light illuminates, follow these steps: First, check whether the engine is running normally. Look for symptoms like shaking or black smoke. If present, avoid restarting the engine—especially if the light is red. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will perform a self-check. After 5-10 seconds, observe whether the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use diagnostic tools to read fault codes and perform targeted repairs.

17

0

Share

What is the mandatory scrapping period for passenger cars?

For household 5-seat passenger cars and 7-seat SUVs, non-commercial small and mini vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide them to be scrapped. In addition to the above vehicles, small and mini non-commercial passenger cars, large non-commercial passenger cars, and wheeled special machinery vehicles also have no usage period limit. Commercial vehicles have scrapping periods, as follows: Small and mini taxi passenger cars have a scrapping period of 8 years, medium taxi passenger cars have a scrapping period of 10 years, and large taxi passenger cars have a scrapping period of 12 years. Public transport passenger cars have a scrapping period of 13 years, other small and mini commercial passenger cars have a scrapping period of 10 years, and large and medium commercial passenger cars have a scrapping period of 15 years. Mini commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal should fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and stamp the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, after verification by the motor vehicle inspection office, if they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to send the vehicle for dismantling with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner should submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates will be reclaimed, and the approval will be processed according to regulations to complete the scrapping registration. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation registration of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.

3

1

Share

What are the pros and cons of the Volkswagen Tiguan?

Volkswagen Tiguan's pros and cons are as follows: 1. Cons: Although the size has increased, making it into the midsize SUV category, the price has also risen accordingly. The cabin materials are very typical Volkswagen, with no essential difference in workmanship and materials compared to 100,000-yuan models. The throttle response at low RPMs is somewhat slow, and turbo lag is quite noticeable, resulting in uneven power delivery. 2. Pros: The engine's absolute power is good, with relatively smooth power delivery at mid-range RPMs. It is quite fuel-efficient and easy to drive daily, with light and responsive steering that doesn't make the large body difficult to handle.

20

4

Share

What does it mean when Tesla has no brakes?

Is the Volkswagen Sagitar a Joint Venture Car?

What to Do When the Parking Brake of BMW 5 Series Fails?

What does '4WD Overheating Temporarily Inactive' mean?

What Causes the Engine Warning Light with an Exclamation Mark?

What is the mandatory scrapping period for passenger cars?

What are the pros and cons of the Volkswagen Tiguan?

How Long After First Obtaining a Driver's License Before It Needs to Be Replaced?

What is the wheel stopper behind the parking space called?

What is the reason for car air conditioning refrigerant leakage that cannot be detected?

How many attempts are allowed for the Theory Test of Subject 3?