What does it mean when abnormal tire pressure is detected?

1 Answers
ElizaRose
07/30/25 8:59am
Tire pressure monitoring showing an abnormality indicates that the air pressure in the four tires is outside the normal range. Here is relevant information: 1. Tire pressure: Tire pressure is essentially the blood pressure of a car, and it plays a crucial role in the vehicle's performance and power. When tire pressure is abnormal, the monitoring system does not prevent the car from being driven. Therefore, before each trip, the owner should perform a static check to ensure the tire pressure matches the specified value. If it does not, do not drive the vehicle. 2. Handling method: If abnormal tire pressure is detected while driving, immediately check the tire pressure. If the low-pressure warning light comes on, avoid sudden steering or emergency braking. While reducing speed, move the vehicle to the roadside and stop as soon as possible. Driving with low tire pressure can cause permanent damage to the tires and increase the likelihood of tire failure.
Was this review help?
5
1
Share
More Forum Discussions

How should a car be parked?

Parking a car differs slightly between automatic and manual transmission models. Manual transmission model: First, press the brake to slow the car down. Then, hold the brake to bring the vehicle to a complete stop. Engage the handbrake, shift the gear to neutral. Turn off the engine, exit the car, and lock the doors. Automatic transmission model: First, press the brake to slow the car down. Then, hold the brake to bring the vehicle to a complete stop. Shift the gear to neutral, engage the handbrake, and finally shift the gear to P (Park). Turn off the engine, exit the car, and lock the doors. The front wheels of a car are steering wheels, meaning the rear wheels can only rotate around a point on the extension line of the rear axle. To park a car in a parking space, first position the rear wheels correctly. The front wheels can be approximately considered as capable of moving laterally, making the task straightforward.
1
4
Share

Why is there no clicking sound when using the turn signal?

If the turn signal does not make a clicking sound, it may be due to poor contact of the turn signal or a malfunction of the buzzer. Below is some information regarding the turn signal indicator sound: 1. How to fix the turn signal indicator sound if it stops working: The absence of the turn signal indicator sound could be caused by poor contact of the turn signal or a malfunction of the buzzer. You can try turning on the turn signal switch and observe from outside the car whether the turn signal is functioning normally. If it is, this indicates that the buzzer is faulty. In this case, simply replacing the buzzer will resolve the issue. 2. No clicking sound when using the turn signal: If the buzzer malfunctions, the clicking sound will disappear. Additionally, the flasher unit might be faulty. The flasher unit controls the blinking frequency of the turn signal. If there is an issue with the flasher, the turn signal will remain constantly lit. The best solution for this problem is to replace the flasher unit.
18
5
Share

How long should you wait before taking a new car on the highway?

A new car can be taken on the highway at any time, as long as you avoid running the engine at excessively high RPMs during the drive. Below are some precautions for taking a new car on the highway: Avoid excessively high RPMs: New cars have a break-in period after purchase. During this period, the car can be driven on the highway, but you should avoid running the engine at excessively high RPMs. Running the engine at high RPMs during the break-in period can increase engine wear. After the break-in period, it is recommended to take the car on the highway to enhance engine performance. Post-break-in inspection: After the initial break-in period, the components of the new car's engine begin to operate more smoothly. Taking the car on the highway and maintaining high RPMs for a period of time can help test the engine's performance under extreme conditions, expanding the components' tolerance for tensile, compressive, impact, and torsional stresses.
18
1
Share

What is the designated stopping position on a slope?

The designated stopping position on a slope requires parking at a fixed location on a slope with a gradient greater than or equal to 10% and a slope length greater than or equal to 30 meters. This is one of the test items in the automobile driver's license examination. Overview of the automobile driver's license examination: The motor vehicle driver's license examination is an official driving skills test conducted within the territory of the People's Republic of China to obtain legal authorization to drive a motor vehicle. Upon passing the examination, the corresponding registered license is issued. Regulations related to the automobile driver's license examination: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" on its official website. According to these regulations, the content and passing standards of the driver's license examination subjects will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures, including deepening the reform of "streamlining administration, delegating power, and improving regulation and services" in public security and traffic management.
5
0
Share

Can You Add 95 Octane Gasoline When There's Still 92 Octane Left in the Tank?

Adding 95 octane gasoline when there's still 92 octane in the tank won't cause problems if done occasionally, but it's not recommended to do this frequently. Here are the hazards of mixing gasoline: If you mix 92 octane and 95 octane gasoline over a long period, the high anti-knock properties of 95 octane gasoline may not be fully utilized, leading to delayed ignition. The ultimate consequence of this phenomenon is incomplete combustion, resulting in increased carbon deposits inside the engine. This has adverse effects on the normal operation and durability of the car engine. It may cause the pressure inside the engine cylinders to fail to meet the combustion requirements of the air-fuel mixture, leading to knocking. The engine may exhibit symptoms such as weak power output and increased fuel consumption. It can also shorten the lifespan of the car's ignition system, fuel injectors, and spark plugs, while increasing exhaust pollution. The reason why different fuel grades are recommended for different cars is due to variations in engine compression ratios among vehicles. Higher octane gasoline isn't necessarily better; you should choose the appropriate gasoline grade based on your engine's compression ratio.
4
0
Share

What Causes a Sudden Noise from the Car Chassis?

Car chassis suddenly making a noise is caused by gear issues, loose connecting components, insufficient lubrication, and other reasons. Gear issues: The gear teeth of the drive wheel are broken or the surface is damaged. In this case, you should pull over to check. If the gear is damaged, it should be replaced with a new one promptly. Loose connecting components: The abnormal noise is caused by loose connecting components of the wheel. There are many gears in the wheel's transmission. If any of them are too loose, a noise will be heard when turning. The connecting components need to be tightened. Insufficient lubrication: In winter, many components are cold and hard, and the lubrication is insufficient, leading to abnormal noise. Additionally, when the drive wheel slips, do not suddenly accelerate, as this can cause the planetary gears to lock on their shafts. Appropriate lubrication oil should be added.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.