···
Log in / Register

What does it mean when a warning light with an exclamation mark inside a circle appears on the car dashboard?

4 Answers
JulianaLee
07/28/25 9:24am

The appearance of a warning light with an exclamation mark inside a circle on the car dashboard indicates the brake warning light. Possible issues with the braking system include: 1. Severe wear of the brake friction pads; 2. Low brake fluid level; 3. The parking brake is engaged; 4. If it is a red brake warning light, the ABS warning light may also illuminate simultaneously, as the ABS cannot function properly when there is a fault in the conventional braking system. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicator lights include: battery indicator, fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators.

Was this review help?
11
2
Share
SanLorenzo
08/11/25 3:41pm

A few days ago, the warning light with an exclamation mark inside a circle suddenly appeared on the dashboard of my old car, which gave me a scare. Based on experience, this is most likely an abnormality in the braking system—possibly the handbrake wasn’t fully released or the brake fluid was running low. I remember last winter when this light came on while driving, I overlooked it, and the brakes felt a bit soft, almost causing an accident. I immediately pulled over to check the fluid level and found it was dangerously low. After topping up the brake fluid, the light went off. The braking system is crucial for safe driving, so it’s important to regularly inspect the antifreeze reservoir and sensor wiring, replacing any aged parts promptly. My advice is to first stop and confirm if the handbrake is properly engaged, then check the brake fluid reservoir level in the engine bay—if it’s below the marked line, top it up or seek repairs. Don’t risk continuing to drive like I did back then; find a reliable mechanic to fix it properly as soon as possible.

Was this review help?
11
2
Share
Expand All
VonGianna
09/28/25 3:53am

Bro, you're asking about that dashboard warning light with a circle and an exclamation mark? Most likely it's a brake system issue, super common. First check if the handbrake is fully released; if the light stays on after releasing it, pop the hood and check whether the brake fluid level is between MIN and MAX marks. Don't risk driving if the problem persists - it could cause skidding accidents. Just call a tow truck or drive carefully to the nearest repair shop. It could be triggered by sensor malfunction or brake fluid leakage - too complicated for DIY diagnosis. Stay calm and prioritize safety - last time I handled it this way, the problem got fixed immediately.

Was this review help?
6
0
Share
Expand All
DeLillian
11/11/25 5:49am

The circle exclamation light on the dashboard primarily indicates a brake system warning. It may be caused by issues such as the parking brake not being fully released, insufficient brake fluid, or severely worn brake pads. The brake fluid reservoir is typically a transparent container under the hood—check if the fluid level is below the marked line. If the fluid level is normal, inspect whether the sensor has poor contact. If the problem persists after simple self-checks, a mechanic should diagnose it with professional equipment to avoid hazards while driving. Regular vehicle maintenance can help prevent such issues.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

Why is the right side too wide when reversing into the garage in Subject 2?

The reasons for the right side being too wide when reversing into the garage in Subject 2 are: 1. Reason one: The reference point was not accurately observed, being too far back. 2. Reason two: The timing was not correctly judged, resulting in turning the steering wheel too late during reversing, which can easily cause the left corner or line of the garage to be crossed. Relevant information about Subject 2 is as follows: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license examination and refers to the field driving skills test. 2. Test content: For small vehicles C1 and C2, the test items include reversing into the garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve as the five mandatory tests. For large vehicles A1, A2, A3, B1, and B2, the test items include the stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curve, turning at a right angle, passing a narrow gate, passing continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, and simulated scenarios such as highways, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
4
1
Share

What are motorcycles with very wide tires called?

One type is the street bike (NK), available from Yamaha, Honda, Kawasaki, and Suzuki. Another type is Harley-Davidson. Motorcycles, powered by gasoline engines, are two or three-wheeled vehicles steered by handlebars for front wheel direction, known for their lightweight, agility, and speed, widely used for patrol, passenger and cargo transport, and also as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Below is an introduction to some motorcycle brands: 1. Haojue: Established in 1992, a diversified investment company primarily focused on the motorcycle industry, one of the larger Sino-foreign joint venture motorcycle manufacturers. 2. Wuyang-Honda: Founded in 1992, under the Guangzhou Automobile Group, a large domestic motorcycle manufacturer integrating R&D, production, and sales. 3. Jianshe-Yamaha: Established in 1992, one of the top ten motorcycle brands, a Chongqing famous product, a large motorcycle enterprise jointly founded by Jianshe Industrial Co., Ltd. and Japan's Yamaha Motor Co., Ltd. 4. SUZUKI: Originated in 1920, under Japan's Suzuki Motor Corporation, a modern enterprise integrating production, manufacturing, distribution, and after-sales service, focusing on motorcycles and automobiles.
20
4
Share

Does the Illumination of the Vehicle Stability Control System Light Affect Driving?

The illumination of the vehicle stability control system light generally does not affect driving. However, if the indicator light remains on after the engine is restarted, it indicates a malfunction in the vehicle stability system, requiring inspection and repair at a 4S shop. The illumination of the vehicle stability control system light signifies that the car's stability system is functioning normally. The system only lights up when it detects that the vehicle is in an unstable condition. The vehicle stability control system is part of the car's driving assistance systems. The vehicle stability system enhances the car's stability performance by monitoring the vehicle's driving state information through sensors and maintaining the vehicle's dynamic balance in coordination with the braking system. Specifically, when the vehicle experiences skidding, where the direction and speed of the car are not under the driver's control, the stability system intervenes with the wheels to help the driver regain control of the vehicle, preventing side skidding or rollover. When the indicator light is on, it is usually caused by the driver accidentally turning off the vehicle stability system. Simply pressing the button again to reactivate the system should resolve the issue. If pressing the stability system button and restarting the system does not turn off the indicator light, try restarting the engine. After restarting, the vehicle's systems will perform a self-check, and in most cases, the stability system will return to normal operation.
3
5
Share

Will Single-Point Speeding Be Fined?

Single-point speeding will be fined as long as it exceeds 10% of the maximum speed limit, because interval speed measurement not only measures the average driving speed of the vehicle between two points but also measures the instantaneous speed of the vehicle passing through the two points. Speeding not exceeding 10% will result in a warning. Speeding within the range of 20%-50% will result in a deduction of 6 points, and speeding exceeding 50% will result in a deduction of 12 points, along with fines of varying amounts. Usually, highways will indicate the driving speed of the lanes. According to the "Regulations for the Implementation of the Road Traffic Safety Law": for roads with 2 lanes in the same direction, the minimum speed of the left lane is 100 kilometers per hour; for roads with 3 or more lanes in the same direction, the minimum speed of the leftmost lane is 110 kilometers per hour, and the minimum speed of the middle lane is 90 kilometers per hour. If the speed indicated by the road speed limit signs is inconsistent with the above lane driving speed regulations, the speed indicated by the road speed limit signs shall be followed. For roads without a central line, the speed limit for urban roads is 30 kilometers per hour, and for highways, it is 40 kilometers per hour; for roads with only one motor vehicle lane in the same direction, the speed limit for urban roads is 50 kilometers per hour, and for highways, it is 70 kilometers per hour.
12
5
Share

Is there a time limit for reverse parking?

Reverse parking has a time limit of 210 seconds. If the reverse parking is not completed within 210 seconds, it will be considered a failure. Reverse parking is one of the test items in the Subject 2 driving test, which involves maneuvering the vehicle to correctly reverse into the garage from both sides, assessing the driver's ability to operate the car in a confined space. The test content includes: reversing from the starting point A into garage B and stopping correctly; moving forward to the turning area C and stopping; reversing from the turning area into garage B and stopping; and finally returning from garage B to point A to complete the test. The evaluation criteria for reverse parking are as follows: failure to follow the prescribed route or sequence results in failure; the vehicle body crossing the line or failing to reverse into the garage results in failure; exceeding the 210-second time limit results in failure; and stopping midway deducts 5 points each time. During reverse parking, it is essential to control the driving speed by using only the first gear or reverse gear at idle speed, without pressing the accelerator, to maintain the minimum speed. Proper timing of steering is crucial—observe carefully during the reversing process, grasp the key points of steering, and turn the wheel at the right moment. Controlling the driving path is also important; the vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. During reversing, accurately align with the boundary lines and adjust the direction promptly to ensure the vehicle enters the garage straight.
13
1
Share

What Toyota model is GTM7152CCM?

GTM7152CCM is the Toyota Yaris. Below are the details about the 2011 1.3E Automatic Charm Edition Toyota Yaris: Powertrain: Equipped with a 1.3L naturally aspirated 4-cylinder 2NZ engine, paired with a 4-speed automatic transmission. Dimensions: Length, width, and height are 3915mm, 1695mm, and 1545mm respectively, with a wheelbase of 2460mm. Chassis: Front-wheel drive layout, front suspension is MacPherson strut independent suspension, rear suspension is torsion beam non-independent suspension, with a unibody structure.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.