What does it mean when a Volkswagen displays a tire pressure loss warning?

1 Answers
VanDaniel
07/30/25 12:11am
When a Volkswagen displays a tire pressure loss warning, it indicates an issue with the tire pressure, causing the pressure sensor to detect an abnormality. In this case, the tires need to be checked. When the tire pressure monitoring system detects insufficient pressure in one or more of the vehicle's tires, a warning light will illuminate on the dashboard along with a text alert to notify the driver. There's no need to panic in this situation. As long as the tire isn't damaged, the vehicle can usually still be driven. If the alarm goes off while driving, avoid slamming on the brakes, as sudden braking could cause a tire blowout. Instead, gradually reduce speed and pull over safely. If there are vehicles behind you, turn on the hazard warning lights to alert them. Then, exit the vehicle and inspect all four tires for any issues. If a problem is found, call for roadside assistance immediately. Additionally, avoid overloading the trunk with too many items. Excessive vehicle weight can also trigger the tire pressure monitoring system to detect low pressure, as the added weight reduces tire pressure. Prolonged driving in this state can eventually damage the tires.
Was this review help?
7
3
Share
More Forum Discussions

What does it mean when the ignition warning light turns red and then off?

Car ignition warning light usually comes on due to poor fuel combustion in the engine cylinders. Here are the relevant explanations: 1. Oxygen sensor: In automotive design, to ensure the engine operates in good condition and maintains normal working lifespan, an oxygen sensor is installed to monitor the engine's combustion status. Once poor combustion is detected, such as excessively high levels of hydrocarbons, carbon monoxide, or nitrogen oxides, these indicate bad combustion states that not only pollute the environment but also lead to fuel waste and excessive engine wear. 2. Solution: If the ignition warning light comes on, it is recommended to visit a repair shop for professional mechanics to diagnose and fix the issue.
8
1
Share

What are the main differences between good and bad chassis?

The main differences between good and bad chassis are as follows: 1. Transmission: Power is transmitted from the engine flywheel, through the clutch, to the transmission. When evaluating a chassis transmission, first look at the type of transmission, common ones include CVT, automatic, dual-clutch transmission, and manual transmission. 2. Steering: Steering systems include hydraulic power steering, electro-hydraulic power steering, and electric power steering. For sedans, electric power steering is better, while for off-road vehicles, the first two provide greater assistance. 3. Suspension: Suspension systems are generally divided into double-wishbone, MacPherson, torsion beam, and multi-link types in terms of structure. Among them, MacPherson and multi-link belong to independent suspensions, which offer better handling and comfort than non-independent suspensions. For example, MacPherson suspension is mostly used for front wheels, belongs to independent suspension, has a simple structure, good space layout, and provides excellent driving stability. Therefore, most cars today use this structure.
15
2
Share

Why Can't the Electric Car Door Open?

The following are the reasons why the car door cannot be opened: 1. Temperature: In the northern winter, the temperature is very low. If the water accumulated in the car lock, door frame, and handle is not dried after washing the car, it is easy to freeze, and the car door may not open in the morning. Some anxious owners may pull the door hard, not knowing that this can easily damage the car paint and seals, and in extreme cases, even break the door handle. 2. Child lock power failure: To protect children's safety, many car rear doors are equipped with child locks. When the child lock is engaged, the rear door cannot be opened from the inside and can only be opened from the outside handle. If the car happens to lose power at this time, the door cannot be opened from the outside either. 3. Remote control failure: The car remote control is the most frequently used car component by owners, and it can also malfunction, resulting in the car door not opening.
13
2
Share

Why can't an electric car move after being submerged in water?

If an electric car cannot move after being submerged in water, it can generally be determined that the motor has been flooded. Here is some additional information: 1. After water exposure: After driving through water, promptly clean the vehicle body and chassis, and ensure proper ventilation and drying. Also, check the engine compartment for water ingress. If flooding is detected, address it immediately to prevent further damage. Pay special attention to inspecting the power battery, motor, and wiring harnesses—any issues must be dealt with right away. 2. Precautions: If the water reaches a certain depth, do not attempt to start the car. In such cases, the vehicle should be classified as a flood-damaged accident vehicle. Professionals should be called to the scene to measure the temperature of the battery and high-voltage components to prevent internal short circuits, fires, or other serious accidents that could result in significant losses.
15
4
Share

How are illegally parked vehicles penalized?

Penalties for illegal parking are as follows: Penalties when the driver is present: 1. The traffic police may point out the illegal act, issue an oral warning, and order the driver to leave immediately; 2. If the driver refuses to leave, and the parked vehicle obstructs the passage of other vehicles or pedestrians, a fine will be imposed and an "Illegal Parking Notice" will be issued. Penalties when the driver is absent: In addition to issuing a ticket, if the parked vehicle obstructs the passage of other vehicles or pedestrians, the traffic police department has the authority to tow the vehicle to a location that does not obstruct traffic or to a location designated by the traffic management department of the public security authority. The procedure for handling illegal parking is: Within three days of receiving the ticket, bring your driver's license, vehicle license, cash or bank card to the local administrative office (or traffic police station) to pay the fine.
19
3
Share

What does it mean when the ignition switch is turned on?

This is a reminder to the driver that the ignition key has been turned on, allowing normal ignition and startup. The ignition switch is commonly referred to as the main switch, main power switch, or master key, and it serves as the main control for the vehicle's entire electrical circuit system. The ignition switch is typically installed above the steering wheel or in the center of the dashboard. Here is some related information: 1. Ignition System: The ignition system's switch can freely open or close the main circuit of the ignition coil and is also applicable to other electrical circuits. It comes in two types: plug-in and rotary knob. The ignition switch consists of a key, key socket, external wiring, and connectors. In some car brands, when the ignition switch is turned to the ON position, the tachometer needle may move, which is not a fault. 2. Reasons for No Response from the Ignition Switch: When attempting to start the car, if the ignition switch does not respond, there could be several possible causes, such as a damaged ignition switch, an unlocked or malfunctioning immobilizer causing unlock failure, a faulty starter motor or poor contact in the motor wiring, a blown main car fuse or damaged starter relay, a severely depleted battery or loose battery terminals, or poor grounding. However, the most common issues are a dead battery or a damaged ignition switch.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.