What does it mean when a 4S shop says a car is off the production line?

1 Answers
JaxonRose
07/29/25 11:17am
Generally, it refers to the conversion of taxis from commercial to non-commercial use. The service life of a taxi is 8 years. The so-called commercial-to-non-commercial conversion means that an operational vehicle is converted into a non-operational vehicle. Here are detailed explanations about it: 1. Explanation one: Because the mileage is particularly high, the service life is also very short. Therefore, if the owner buys this type of car, the price is very cheap, but the failure rate is also particularly high. 2. Explanation two: As a taxi, it usually goes off the production line after a failure between 4 to 5 years, so if the owner buys it, they can still drive it for a few more years.
Was this review help?
14
3
Share
More Forum Discussions

What Causes All Warning Lights to Illuminate in the Magotan?

The illumination of the Magotan's engine warning light can be attributed to various reasons, including wiring faults, sensor malfunctions, control module issues, poor fuel quality, or internal engine cylinder contamination with carbon deposits. It is advisable to promptly visit a 4S shop or repair facility to inspect and service the relevant modules and components. Below is an introduction to the Magotan: 1. Overview of the Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the Future B6, and represents the first B-class sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, 'Magotan' symbolizes confidence, decisiveness, and dynamism, while 'Tan' signifies soaring, surpassing, and passion. 2. Product Features of the Magotan: The Magotan is equipped with a 1.8TSI engine, the latest generation from Volkswagen in Germany, which embodies the most advanced engine technology globally and leads the development trend of gasoline engines. The 6-speed Tiptronic manual/automatic transmission, perfectly matched with the 1.8TSI engine, offers Magotan owners the convenience of an automatic transmission along with the driving pleasure of manual gear shifting.
8
1
Share

Where is the car heater switch located?

The car heater switch is located on the center console area in front of the driver's position. The button symbol is a thermometer icon, usually distributed on both sides - one side is blue and the other is red. The red side indicates heating while the blue side indicates cooling, meaning red increases temperature and blue decreases temperature. When using the car heater, please note that warm air should not blow directly at the head as prolonged exposure may cause driver fatigue and affect driving safety. Therefore, it's recommended to open a small window gap for air circulation during prolonged heater use to maintain oxygen levels in the cabin and keep the driver alert.
3
5
Share

Where is the cruise control located on the 2013 Great Wall C50?

13-year Great Wall C50 cruise control is located on the switch of the light and turn signal lever, with the ON/OFF key as the switch and CANCEL as the cancel key. Below are the detailed information about cruise control: The cruise control system, abbreviated as CCS, is also known as the cruise control device, speed control system, or autonomous driving system. It is commonly used on long-distance highways. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and the car's driving resistance to maintain the set speed without the need to operate the throttle, reducing fatigue and unnecessary speed changes, thereby saving fuel. In principle, cruise control should be used on highways or fully enclosed roads. This is because complex road conditions on non-enclosed roads are not conducive to traffic safety. It is prohibited in rainy or snowy weather. Roads with too many vehicles are also unsuitable for cruise control. Mountainous or excessively winding roads should be avoided. Under normal circumstances when exiting a curve, appropriate acceleration is needed to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the car's computer, which can often pose dangers when navigating curves. Under such conditions, the speed should be appropriately controlled.
9
1
Share

Which Mode Should You Use When Turning on the Car Air Conditioning in Summer?

In summer, use the cooling mode when turning on the car air conditioning. Do not immediately enter a car that has been exposed to the sun. First, lower all the windows or open the doors, then turn on the fan to accelerate air circulation. After a few minutes, close the windows and turn on the air conditioning. This not only helps release toxic substances but also improves cooling efficiency. Additionally, pay attention to the direction of the air conditioning airflow. After turning on the air conditioning, it is not advisable to let the airflow blow randomly or even choose the mode that blows toward the windshield. The correct method is to select the upward airflow direction, utilizing the principle that hot air rises and cold air sinks, allowing the cold air to cool the car from top to bottom.
9
0
Share

Can You Drive with the Differential Lock Alarm Continuously Ringing?

You can continue driving with the differential lock alarm continuously ringing. Here are detailed explanations regarding this issue: 1. Differential Oil: Differential oil has a service life. When it reaches a certain mileage, it must be replaced; otherwise, the lubrication effect of the oil will drastically decrease. 2. Differential Gears: If the gears are severely worn, the differential will produce a buzzing sound during operation. Replacing the gears with new ones is necessary to resolve this issue. 3. Foreign Objects on the Differential: It is also possible that there are foreign objects mixed in the differential. Simply removing them will solve the problem.
11
3
Share

What does vehicle inspection mean?

Vehicle inspection refers to the mandatory testing process as part of the annual vehicle examination. Only vehicles that pass this inspection can officially complete the annual review procedure, obtain the annual inspection mark, and be permitted to continue driving on the road. Below is an introduction to the relevant procedures: 1. Emission testing: Staff will conduct a preliminary check before the test, mainly verifying whether the engine number matches the information on the vehicle license. 2. Violation check: At the inquiry window, collect and fill out the 'Motor Vehicle Regular Inspection Registration Form', which can be obtained with the vehicle license. 3. Pay deposit: Pay the deposit at the deposit window, keep the deposit receipt, and collect and fill out the appearance inspection form.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.