What does it mean to set up car Bluetooth?

Why Do Hatchbacks Have Rear Wipers?

Hatchbacks have rear wipers because their rear design is vertically straight, causing the airflow from the sides of the car to swirl there, creating vortices. This leads to the accumulation of rainwater and debris on the rear window, necessitating the use of a wiper. Hatchbacks are typically of the hatchback type, where the rear glass and the rear door are integrated. The wiper's pivot is installed on the metal body of the rear door below the glass, so when the rear door is opened, it does not interfere with the wiper. The moving body of the car generates significant shear forces due to friction, and these sheared airflows are released at the rear, creating turbulence. As some of the air moves with the vehicle, there is a shortage of air at the rear, forming a low-pressure zone. When driving on dirty roads, the dust or mud kicked up by the rear wheels accumulates in this low-pressure zone at the rear due to the difference in air pressure. This is why the rear of the car is often the dirtiest after a long trip, making the wiper essential for cleaning the rear windshield and ensuring driving safety.

8

5

Share

Is it necessary to install underbody armor for a new car?

It is not necessary to install underbody armor for a new car. New cars have already undergone anti-rust treatment at the factory, and the underbody has been sprayed with a protective layer, which is sufficient for driving in relatively flat areas such as cities. However, if the underbody of the car is clean and flat when it leaves the factory, and the steel components are exposed, it indicates that the car has not undergone anti-rust treatment. If the car is driven in harsh environments year-round, it is very necessary to install underbody armor. When driving, small stones may be kicked up on some roads, and these stones can have a significant impact on the car's underbody. This protective layer can effectively shield the underbody from the impact of small stones.

17

2

Share

What is the normal tire pressure for the Buick Verano?

The normal tire pressure for the Buick Verano is around 2.5, with a fluctuation of 0.2. Due to the effect of thermal expansion and contraction, the tire pressure can be slightly higher in winter and slightly lower in summer. When the vehicle is equipped with a Tire Pressure Monitoring System (TPMS), the system can alert the driver in case of low tire pressure. The Buick Verano is a new compact model under the Buick brand. The dimensions of this car are 4718mm in length, 1802mm in width, and 1466mm in height (1471mm for the 1.5T model), with a wheelbase of 2700mm. The Buick Verano offers two engine options: a 1.5L and a 1.5T, with maximum power outputs of 118 horsepower and 169 horsepower, respectively.

8

5

Share

How to Set One-Touch Window Lift?

Setting one-touch window lift method: Pull the window button directly to raise the window to the top. Then, keep holding it for 3 to 5 seconds before releasing. Next, press the window button to lower the window completely. Again, hold for 3 to 5 seconds before releasing. After that, test the one-touch lift function, and the setup is now complete. Whether controlled by a smart key or mechanical button, the one-touch window lift generally comes with an anti-pinch feature. During the automatic closing operation, if an object is detected between the glass and the window frame, the closing action will automatically stop midway and revert to the initial state to prevent potential pinching hazards.

14

0

Share

How to Set Up Remote Window Control?

Method to set up remote window control: Turn on the ignition switch, use the switch to open the power window halfway, then fully push the switch until the power window is completely closed, and keep holding the switch for 3 to 5 seconds after the window is fully closed. If you forget to close the windows after getting out of the car and the distance is too far to walk back, simply take out the key and lightly press the lock button on the remote key, and all four windows and the sunroof will automatically close. The power window settings should be reconfigured under any of the following circumstances: 1. Replacement or disassembly of the multiplex network master switch, multiplex network switch, multiplex network door ECU harness, or power window regulator motor; 2. Replacement of fuses or relays related to power window control. Unless the power window regulator motor is reset, the AUTO operation function, anti-pinch function, and remote control operation function of the multiplex network master switch will not work.

10

0

Share

How to Replace the Remote Battery for Volvo S90?

Steps to replace the remote battery for Volvo S90: 1. Remove the mechanical key. Open the panel to see the mechanical key, which is fixed between two panels via a slot. Press the small black button on the top of the key sideways and push the logo side forward to open it; 2. Press the protruding button on the back panel sideways and pull the back panel upward by 5mm. At this point, the back panel will detach from the main body and can be removed; 3. Rotate the battery cover to the 'ope' position, then remove the battery cover from the gap and take out the O-ring seal; 4. Now you can see the coin battery, which is model CR2032. Simply remove the old battery and replace it with a new one. The Volvo S90 is a luxury sedan under the Volvo brand. The dimensions of this car are 5090mm in length, 1879mm in width, 1450mm in height, with a wheelbase of 3061mm.

14

0

Share

What does it mean to set up car Bluetooth?

Why Do Hatchbacks Have Rear Wipers?

Is it necessary to install underbody armor for a new car?

What is the normal tire pressure for the Buick Verano?

How to Set One-Touch Window Lift?

How to Set Up Remote Window Control?

How to Replace the Remote Battery for Volvo S90?

What brand of engine does the Li ONE use?

Can a puncture on the sidewall of a tire be repaired?

Why is the fan noise loud in the Venucia D60?

What is the emission standard for China VI vehicles?