···
Log in / Register

What does it mean to replace the inspection compliance sticker?

4 Answers
McEliana
07/29/25 4:07pm
During the valid period of the motor vehicle inspection, if the inspection compliance sticker is damaged, lost, or destroyed for any reason, the vehicle owner must submit the following documents to apply for a replacement: the vehicle registration certificate; if the inspection compliance sticker is damaged, the damaged sticker must also be surrendered. Below is additional information: relevant regulations: According to the "Implementation Regulations of the Road Traffic Safety Law": Article 16 Motor vehicles must undergo safety technical inspections within the following periods from the date of registration: passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years, once every 6 months; trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years, once every 6 months; small and mini non-commercial passenger vehicles must be inspected within the first 6 years.
Was this review help?
4
1
Share
Bell
08/15/25 4:29am
I've seen plenty of cases about replacing the inspection sticker in my 20 years of driving. It's basically a small label you get after your vehicle passes the annual inspection, usually stuck on the windshield. If it gets lost or damaged, you'll need to go to the DMV or apply online for a replacement. This is crucial - driving without it can result in fines of several hundred yuan or even points deducted if caught by traffic police. Plus, it certifies your car is roadworthy and safe, preventing potential accidents. When applying for a replacement, bring your vehicle registration and ID card, fill out a form, and pay a nominal fee of about 10 yuan. The process can often be completed the same day. Don't delay - my neighbor Lao Li didn't replace his promptly last month and got fined during a business trip, which also disrupted his work. Now I always advise new car owners to regularly check if their sticker is securely attached to avoid having to go through the hassle of replacement due to weathering.
Was this review help?
5
0
Share
Expand All
StNathan
10/12/25 5:57am
As someone who pays daily attention to car maintenance, the process of reissuing the inspection compliance sticker refers to obtaining a replacement for the official certification mark that proves your vehicle has passed the annual inspection, in case it gets lost or damaged. This sticker is an essential document issued by authorities to confirm your vehicle's roadworthiness—driving without it is illegal. To apply for a replacement, you need to bring the original vehicle registration certificate and your personal ID to the local DMV. It usually costs around 10 yuan, and some areas even allow online applications with mail delivery. The key point is not to delay, as you may face fines and potential issues with your car insurance renewal. I recommend applying a protective film over the sticker to prevent dust and moisture damage, avoiding frequent replacements that waste time and effort, and reducing potential driving risks. Remember, DMVs can get crowded, so arrive early to avoid long waits—like the time I had to rush and ended up waiting forever to get it done.
Was this review help?
9
2
Share
Expand All
McBenjamin
11/25/25 7:01am
As a regular young driver with less than two years of experience, the replacement of the inspection compliance sticker (that small decal after the vehicle annual inspection) is necessary if it falls off or gets damaged. This sticker proves your car is road-safe. If lost, you must either visit the DMV with your documents or submit an online application to get a new one quickly. Don’t procrastinate and forget—driving without it could lead to fines if stopped by police and even negatively impact your driving record. The fee is usually just a few bucks, a minor but essential thing. I once had a car wash blur the label and promptly replaced it, saving myself trouble. Now, I always check if it’s firmly attached before driving to avoid any mid-trip surprises.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to use the cigarette lighter in Audi A6L?

Audi A6L cigarette lighter usage method: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter starts heating and will pop out when the heating wire reaches the required temperature. Taking the Audi A6L 2021 40TFSI Luxury Elegance model as an example, it is equipped with a 2.0T 190 horsepower L4 turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. The Audi A6L 2021 40TFSI Luxury Elegance model has body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm.
5
1
Share

Is the first maintenance of a new car free?

Is the first maintenance of a new car free? The first maintenance is free, and it is performed when the car has traveled approximately 5,000 kilometers. It refers to the first maintenance after the vehicle has been driven. The maintenance items include: 1. Changing the engine oil, oil filter, air conditioning filter, and air filter; 2. Checking the levels of coolant, battery fluid, and windshield washer fluid; 3. Checking the brake and clutch fluid levels and the power steering fluid level; 4. Inspecting all oil pipe interfaces in the system for leaks; 5. Checking the front and rear lights; 6. Checking tire pressure and wear, and tightening screws according to the specified torque. The precautions for the first car maintenance are: 1. Make an appointment with the 4S store in advance; 2. Bring the vehicle license and maintenance manual.
10
4
Share

Where is the headlight height adjustment button for the 10th-generation Accord?

The headlight height adjustment for the 10th-generation Accord is located in the engine compartment. There is a white plastic screw behind each headlight. Turning it clockwise with a flat-head screwdriver will raise the headlight, while turning it counterclockwise will lower it. Always switch to low beams in advance when meeting oncoming traffic to avoid sudden glare. Avoid using high beams when overtaking, as this can impair your judgment of width. When encountering oncoming vehicles using high beams, slow down to a safe speed and alternately flash your high and low beams as a signal. For roads beyond blind spots, you can use your horn as a warning. The Accord's body dimensions are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. It features front-wheel drive and has a 65-liter fuel tank.
19
1
Share

What should be noted when using a new car?

Things to note when using a new car are: 1. The car needs to warm up after starting; 2. Avoid overloading; 3. Do not drive long distances or at high speeds; 4. Use higher quality fuel; 5. Shift gears in a timely manner; 6. Do not slam on the brakes during the break-in period; 7. Avoid frequent use of emergency braking. New car maintenance items include: 1. Changing the engine oil, oil filter, and cleaning the air filter; 2. Checking whether the car's coolant level is normal; 3. Inspecting the car's brakes and undercarriage components for scratches; 4. Checking if the power steering fluid level is normal and if there are any oil leaks at the pipe connections; 5. Examining the condition of the generator, air conditioning, water pump, and belts for aging and tension; 6. Checking tire pressure and wear condition, and rotating the tires if there is wear.
12
0
Share

How to Remove the Steering Wheel of a Chery A3?

Method to remove the steering wheel of a Chery A3: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the tip of the screwdriver between the retaining clip and the airbag hook, causing the airbag side to automatically pop slightly towards the seat; 5. Turn the steering wheel 180 degrees and continue to pry open the retaining clip; 6. Remove the airbag, disconnect the yellow safety clip behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector located above inside the steering wheel, and use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise; 8. Remove the steering wheel.
15
1
Share

How to Use the Mechanical Key of Sagitar?

The method to use the mechanical key of Sagitar is as follows: 1. Insert the key into the ignition and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch pedal all the way down and turn the key to the 'start' position. Taking the 2021 manual Fashion Smart Connection Edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a minimum ground clearance of 2731mm. The 2021 manual Fashion Smart Connection Edition Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.