What does it mean to have missed three consecutive inspection cycles?

2 Answers
RhettLynn
08/28/25 4:00am
Failure to participate in the inspection for three consecutive scoring cycles will result in the downgrade of the driver's license. Relevant regulations: According to Article 80, Paragraph 3 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Order No. 123 of the Ministry of Public Security), "driving a motor vehicle without participating in the inspection within the prescribed time limit will result in corresponding fines imposed by the public security traffic management department." License replacement procedures: For drivers holding licenses for large buses (A1), tractors (A2), city buses (A3), medium-sized buses (B1), or large trucks (B2), if they fail to participate in the inspection for three consecutive scoring cycles, the vehicle management office shall revoke their highest permitted driving qualification and notify the driver to complete the downgrade and replacement procedures within 30 days.
Was this review help?
12
5
Share
WillowDella
09/10/25 2:32am
As a car owner, I just experienced this last year. 'Failing to undergo inspection for three consecutive cycles' means the vehicle hasn't undergone the mandatory annual inspection beyond the stipulated period. Typically, each cycle is one year, so it means three years without inspection. The consequences were severe: I was pulled over by the police while driving, fined several hundred yuan, and had points deducted from my license. Even worse, my insurance became invalid, meaning I would have been left without any coverage in case of an accident. When I went to rectify the situation, I found out that the vehicle management office required me to pay overdue fines and undergo re-inspection. If any components were found to be aging, such as brake issues, repairs were necessary. Since then, I've made sure to get my car inspected on time to ensure its safety. I recommend setting up reminders on your phone—don't be lazy like I was. Annual inspections help prevent potential hazards by checking lights, emissions, and other issues, thereby avoiding accidents.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Use the S Gear in Focus?

S gear is the sports mode of the car. In S gear sports mode, the transmission can shift freely, but the shift timing is delayed, allowing the engine to maintain high RPM for a longer time, enabling the car to travel at low gears and high RPM for an extended period, thereby achieving greater torque output and acceleration. More details about the S gear are as follows: 1. Since the S gear only delays upshifting without changing other operational aspects, it inevitably increases the transmission load and temperature in the short term, leading to accelerated wear. Therefore, try not to use the S gear for extended periods. 2. In terms of fuel consumption, because the fuel injection volume increases at high RPM, the fuel consumption in S gear mode is much higher than in normal mode. However, using the S gear also has benefits for the vehicle. Cars that frequently drive in congested urban areas tend to accumulate more carbon deposits in the engine. Therefore, using the S gear appropriately at regular intervals helps remove carbon deposits from the engine, improving fuel economy and extending engine life. 3. Generally, automatic transmission vehicles have the following gear positions: P, R, N, D, S: (1) P (Parking gear). When parking the car, the gear lever must be shifted into the P position. (2) R (Reverse gear). (3) N (Neutral gear). The N position is equivalent to neutral and can be used when starting the car, parking without leaving the vehicle, or during towing. (4) D (Drive gear). During normal driving, place the gear lever in the D position, and the car will automatically shift between forward gears. The D gear is the most commonly used gear. (5) S gear is the sports mode of the car ("S" stands for "Sport"). In S gear sports mode, the transmission can shift freely, but the shift timing is delayed, allowing the engine to maintain high RPM for a longer time, enabling the car to travel at low gears and high RPM for an extended period, thereby achieving greater torque output and acceleration. While the car is in motion, simply push the gear lever into the "S" position. This is typically used for climbing hills or rapid acceleration when overtaking.
12
1
Share

Is it harmful to leave the car running with the AC on overnight?

Leaving the engine running with the AC on while parked can negatively affect your vehicle. Here are the relevant details: 1. Reasons: When the engine idles, its RPM is relatively low. Running the AC under these conditions leads to incomplete fuel combustion, which can cause carbon buildup in the engine cylinders and throttle body. Additionally, idling with the AC on increases fuel consumption. 2. Hazards: During engine idling, incomplete combustion produces exhaust containing high levels of carbon monoxide. This toxic gas may accumulate around the vehicle and enter the cabin through the AC system. With windows closed for AC operation, poor ventilation allows carbon monoxide concentration to gradually rise inside the vehicle, posing serious health risks to occupants over time.
9
4
Share

How long after canceling an exam can you reschedule?

After cancellation, you currently need to wait ten days before you can reschedule. Here is the relevant information: 1. Cancellation period for scheduled exams: You must cancel at least 2 days in advance, and it must be done on a business day. For example, if you need to cancel an exam scheduled for September 11, you must do so by September 9 (inclusive). However, if September 11 falls on a Monday, you must cancel by the previous Friday. 2. Important notes: Once an online exam appointment is successfully scheduled, you cannot cancel it online. When scheduling an exam online, be sure to carefully choose the exam date and location.
14
0
Share

What is the relationship between the clutch and the transmission?

The clutch is located between the engine and the transmission, and its function is to transmit the engine's power to the transmission. The following is an introduction to the clutch-related content: 1. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Function: The role of the clutch is to gradually engage the engine with the transmission to ensure smooth starting of the vehicle, temporarily disconnect the connection between the engine and the transmission to facilitate gear shifting and reduce the impact during shifting, and to act as a separator during emergency braking to prevent overload of the transmission and other drive systems, thereby providing a certain protective effect.
9
0
Share

What brand of car is the Elysion?

Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda, featuring a fashionable exterior, smooth lines, a well-designed interior, a spacious and elegant overall shape, ample space, comfortable handling, and economical fuel consumption. Below is the relevant information about the Elysion: 1. Exterior: The Honda Elysion continues the design of its concept car, with only minor adjustments made to some details. The car incorporates chrome decorations in many places, highlighting its attention to detail. The exterior characteristics of the Elysion reflect bold and innovative design: a streamlined body shape, an arched roof, extensive use of glass, including panoramic glass windows that hide the pillars and a full-length glass sunroof. 2. Powertrain: The Elysion is equipped with a 2.4-liter engine paired with a 5-speed automatic transmission, and it is available in both two-wheel drive and four-wheel drive versions. Regarding the powertrain application of the domestic Elysion.
1
4
Share

What is the difference between a turnout lane and an emergency parking strip?

Turnout lanes are used on single-lane roads to allow vehicles to yield to oncoming traffic, while emergency parking strips are provided on highways or first-class roads for vehicles to park temporarily in emergencies such as traffic accidents or mechanical failures while awaiting rescue. Below are detailed explanations: 1. Emergency parking strip: Refers to a temporary parking area on highways and first-class roads, designated for vehicles experiencing sudden malfunctions or other emergencies. On highways, it is distinguished from the main traffic lanes and is located on the far right near the roadbed, similar to the non-motorized lanes on regular roads. 2. Turnout lane: A designated area for emergency parking or vehicle repairs, marked within yellow lines. On single-lane roads, it is a widened section of the road within a visible distance, used for vehicles to pass each other. On Class IV roads with a 4.5m single-lane roadbed, turnout lanes are widened sections set at appropriate intervals to facilitate passing.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.