What does it mean to drive on the highway shoulder illegally?

2 Answers
AliyahMarie
07/24/25 10:53am
Driving on the highway shoulder illegally refers to motor vehicles driving on the outermost right lane of the highway. There are 3 key points to note when driving on the highway: 1. Entering the highway: You should accelerate to over 60 km/h as soon as possible. Vehicles entering from the ramp must speed up in the acceleration lane and must not hinder vehicles already in the main lane when merging. They should drive in the outer lane; 2. During normal driving: Vehicles should drive in their designated lanes. Small passenger vehicles should drive in the middle lane, while large buses and trucks should drive in the right lane; 3. No arbitrary lane changes: When changing lanes or overtaking, you must first turn on your turn signal. At night, you must also switch between high and low beams. Only change lanes or overtake after confirming it is safe, and only use adjacent lanes when overtaking.
Was this review help?
4
1
Share
SanAlan
08/11/25 5:54am
Hey, I'm a driver with over a decade of experience, often traveling on highways, so I'm very familiar with the violations related to shoulder driving. That is to say, on highways, the hard shoulder on the side is originally intended for emergency vehicle stops, such as temporary parking in case of breakdowns or malfunctions. If someone treats it as a driving lane and drives on it, that's a violation. This not only violates traffic regulations but also poses significant safety risks. I remember once when I was in a hurry and tried to take a shortcut by driving on the shoulder, I almost collided with a parked broken-down vehicle and was fined and penalized by traffic police on the spot. Since then, I've strictly adhered to driving in the main lanes, preferring to take a break at service areas instead. On highways, speeds are high, and the shoulder is narrow. If an ambulance or emergency vehicle suddenly needs to pass, an accident could happen in an instant. Always maintain patience when driving; don't rush to occupy the shoulder during traffic jams. Safety comes first, or else getting fined a few hundred yuan plus penalty points would be a real loss.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

How Long Does an AMT Transmission Last?

With proper driving, regular maintenance, and no manufacturing defects, an AMT transmission should last as long as the vehicle itself. Here is some relevant information about transmissions: 1. Basic Information: An automatic transmission can determine the optimal gear based on parameters such as vehicle speed, throttle position, and driver commands. It controls operations that were traditionally performed manually by the driver, including clutch engagement/disengagement, gear shifting, and synchronization of engine throttle opening, ultimately achieving automated gear shifting. 2. Working Principle: The AMT transmission is modified based on the original mechanical transmission, primarily altering the manual gear-shifting mechanism.
17
5
Share

Is It Necessary to Buy a Steering Wheel Lock for a Car?

Whether to purchase a steering wheel lock for a car can be decided based on the owner's individual circumstances. To prevent car theft, most car owners choose to install a steering wheel lock. The following are the introductions: 1. Introduction one: A steering wheel lock can effectively prevent car theft. It features a high-quality lock core that is drill-proof and tamper-resistant, offering new practicality and convenient twist-lock operation. 2. Introduction two: Once the steering wheel lock is engaged, the steering wheel becomes immovable, ensuring the car's safety. The steering wheel lock is easy to use and can serve as a self-defense tool in emergencies.
10
2
Share

How long should you start the engine if the car hasn't been driven for a long time?

You should start the engine for about fifteen minutes if the car hasn't been driven for a long time. Here is additional information: Hazards of prolonged vehicle inactivity: Oil seal aging: Uneven force distribution around oil seals can lead to permanent deformation, causing oil leaks. Battery failure: Long-term self-discharge generates sulfides on the electrode plates, affecting recharge efficiency and leading to premature battery failure. Tire deformation: Pressure-induced deformation may become permanent, causing tire imbalance and accelerated wear. Engine problems: Issues may arise with engine oil, coolant, antifreeze, etc., leading to engine malfunctions.
12
0
Share

What happens if too much engine oil is added to a motorcycle?

Adding too much engine oil to a motorcycle can cause engine overheating, incomplete clutch separation, and reduced power. When adding engine oil, the oil level should be between the upper and lower limits on the dipstick—neither too much nor too little is acceptable. If too much oil is added, the oil will expand as the engine temperature rises, increasing the pressure in the oil chamber and the operating resistance, which leads to reduced vehicle power and increased fuel consumption. A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also serves as sports equipment.
10
1
Share

How Often Should Engine Oil Be Changed If the Car Is Rarely Driven?

If the car is not driven frequently, the engine oil should still be changed every 6 months. More relevant information is as follows: 1. Definition of engine oil: Engine oil is referred to as the blood of the engine. Without engine oil, the car's engine cannot operate properly. 2. Functions of engine oil: Inside the engine, oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. When the engine is running, the oil forms a thin film on the surfaces of various components, preventing direct contact and friction between them. If engine components come into direct contact and friction occurs, it will accelerate engine wear and generate a large amount of heat instantly, potentially damaging the engine.
6
3
Share

Do You Need to Press the Brake When Shifting from D to L Gear in an Automatic Transmission?

When shifting from D gear to L gear while driving an automatic transmission car, you do not need to press the brake. There is a specific button on the gear lever or shift handle designed for this type of gear shift—simply press and hold the button to complete the operation. In an automatic transmission, P stands for Park, R for Reverse, N for Neutral, S for Sport mode, D for Drive, L for Low gear, and M for Manual mode. When descending a hill or a long slope, you should shift to L gear, which restricts the car to the lowest gear automatically. This allows the engine to assist in braking, preventing the need for prolonged brake pedal use that could overheat the brake pads and pose a hazard.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.