What Does It Mean for a Private Car to Exceed the Limit?

1 Answers
SebastianDella
07/25/25 12:40am
Private car exceeding the limit refers to the situation where the weight carried by a private car exceeds the stipulated limit. The phenomenon of overloading and exceeding limits is quite severe. In some city buses, overloading is most common, with passenger numbers far exceeding the rated capacity. The same applies to trucks, where the total mass including cargo often surpasses the prescribed limit, posing significant dangers. More relevant information is as follows: 1. Exceeding the limit: This refers to a vehicle's load surpassing the road's prescribed limits, primarily focusing on the relationship between vehicle loading and the road, with particular attention to the normal use of the road. 2. Overloading: This refers to a vehicle carrying cargo beyond its rated load capacity. The assessment of overloading mainly concerns the vehicle's performance and the resulting driving safety issues.
Was this review help?
6
0
Share
More Forum Discussions

What are the effects of using coating spray on a car?

Using coating spray on a car has the following effects: it can cause the paint to become thinner and more susceptible to scratches. The composition of the coating agent includes: glass cellulose, silicon polymers, fluorine polymers, and high-purity water-based non-petroleum environmentally friendly materials. The functions of the coating are: 1. Resisting paint oxidation and aging; 2. Effectively blocking UV radiation; 3. Corrosion resistance and high-temperature resistance; 4. Scratch resistance and easy cleaning; 5. Protecting the brightness of the car paint and creating a mirror-like effect for 3 to 5 years or more; 6. Being highly environmentally friendly with water-based materials, not oxidizing itself, and causing no secondary pollution to the car paint. The method of using the coating agent is: 1. First, clean the car body thoroughly; 2. Dehydrate and dry the entire car; 3. Apply the coating agent evenly on the car paint; 4. Use a dry towel to evenly spread the coating liquid on the car paint; 5. Apply a water-repellent promoter to finish.
7
1
Share

How often should the fuel filter of the Verano be replaced?

The fuel filter of the Verano should be replaced every 20,000 kilometers. The fuel filter, abbreviated as the fuel filter, is located on the inlet side of the fuel pump. Taking the Buick Verano 2020 model as an example, its body dimensions are: length 4723mm, width 1802mm, height 1466mm, wheelbase 2700mm, fuel tank capacity 52 liters, and trunk capacity 455 liters. The Buick Verano 2020 model is equipped with a 1.0T turbocharged engine, with a maximum power of 92kW and a maximum torque of 180Nm. It is paired with a 6-speed automatic transmission and features a front suspension type of MacPherson independent suspension.
5
3
Share

How to Test Whether a Spark Plug is Good or Bad?

Testing methods for spark plugs are as follows: 1. Unscrew the spark plug and place it on the cylinder block, then test for spark using a high-voltage wire. If there is no spark or the spark is weak, it indicates that the spark plug is leaking electricity or not working; 2. Let the engine idle and carefully listen for changes in engine speed and sound. If the changes in speed and sound are obvious, it indicates that the spark plug is normal. If the changes in speed and sound are not obvious, it indicates that the spark plug is in an abnormal state. 3. If the spark plug is severely eroded, with phenomena such as pitting, black streaks, cracks, or melted electrodes at the top, it indicates that the spark plug is damaged and must be replaced immediately; 4. If the spark plug is black as if smoked, it indicates that the cold/hot type of the spark plug is wrong or the air-fuel mixture is too rich, or engine oil is leaking. If the spark plug is reddish-brown or rust-colored, it indicates that the spark plug is normal.
7
0
Share

Does Mis-shifting Gears in Subject 2 Result in Penalty Points?

Mis-shifting gears in Subject 2 does not result in penalty points. Subject 2 primarily assesses the candidate's ability to control the vehicle's position within the test area. Generally, mis-shifting gears is not penalized, but if detected, it is still necessary to promptly shift to the correct gear to avoid affecting the vehicle's performance and subsequent operation. Key Points to Note for Subject 2 Examination: Upon entering the vehicle, the first step is to adjust the seat and mirrors to a comfortable and suitable position, and ensure the seatbelt is fastened. For parallel parking, remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the vehicle's speed. For manual transmission vehicles during the hill start, remember to engage the handbrake. When starting, always signal left, release the handbrake, maintain clutch control, and gradually release the clutch while applying throttle to prevent stalling or rolling back. This item has been removed for automatic transmission vehicles. For the 90-degree turn, identify the turning point quickly and react promptly, ensuring coordination with the vehicle's speed to avoid deviation. For the curve driving (S-turn), the safest method is to slow down and proceed cautiously. Those with good vehicle control during practice can pass through swiftly in one go. During reverse parking, always control the speed, identify your reference points accurately, and make minor adjustments when observing deviations in the mirrors to realign the vehicle.
17
0
Share

Which company produces McLaren?

McLaren is produced by McLaren Automotive. Taking the 2019 McLaren 720s as an example, its body dimensions are: length 4543mm, width 1930mm, height 1196mm, wheelbase 2670mm, fuel tank capacity 72l, body structure is a 2-door 2-seater hardtop coupe, and trunk capacity is 360l. The 2019 McLaren 720s is equipped with a 4.0t twin-turbocharged engine, with a maximum power of 530kw and a maximum torque of 770nm, matched with a 7-speed dual-clutch transmission. It adopts front and rear double-wishbone independent suspension.
9
5
Share

What is the horsepower of the Quanchai 4115 engine?

The Quanchai 4115 engine has 110 horsepower. Diesel engines are divided into: 1. Spark ignition engines: Diesel engines inject diesel into the intake pipe to mix with air, forming a combustible mixture that enters the cylinder and is ignited by the spark plug to expand and perform work; 2. Compression ignition engines: Diesel engines use a fuel injection pump and injector to directly inject diesel into the engine cylinder, where it mixes with compressed air and self-ignites under high temperature and pressure, pushing the piston to perform work. Horsepower is a commonly used unit for measuring power in engineering, and diesel engines are engines that burn diesel to release energy.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.