···
Log in / Register

What does it feel like to be in the car during a minor rear-end collision?

4 Answers
Albuquerque
07/25/25 3:27am
During a minor rear-end collision, you may feel a slight vibration inside the car. Impact of rear-end collisions on vehicles: In the case of a minor rear-end collision, the damage is usually limited to parts like the rear bumper. After repairs, there will be no impact on the vehicle's future use. However, in more severe rear-end collisions, the overall smoothness of the vehicle can be affected. Even after repairs, the car may not perform as well as before. You might notice that the steering wheel feels heavier, and the driving stability significantly decreases, which can compromise driving safety. Methods to prevent rear-end collisions: When approaching areas with blind spots, such as large undulating roads, it's advisable to slow down in advance. Maintain the same speed when going uphill and downhill, and be prepared for emergency stops or lane changes. Keep a sufficient safe distance from the car in front, and be ready to brake if the leading car stops suddenly. Avoid hard braking whenever possible. If you anticipate a situation, slow down early and use gentle braking to alert the car behind you. Novice drivers should try to avoid the fast lane.
Was this review help?
6
1
Share
GabrielAnn
08/11/25 12:02pm
Wow, I have to say, that slight rear-end collision was quite unexpected. The car suddenly lurched forward, like being tapped on the back, and the whole body shook noticeably. My body instinctively leaned forward, but the seatbelt tightened instantly, cushioning the inertia, so I didn’t hit the steering wheel. The sound wasn’t loud but crisp—just a 'bang,' like something dropping. My heart was pounding, but after checking the rearview mirror, I saw the other driver smiling—it was a low-speed scrape. Inspecting the bumper, there was just a small dent, no big deal. Looking back, thank goodness I usually drive slowly; if it had happened during rush hour, it would’ve caused a major traffic jam. The habit of wearing a seatbelt really prevents injuries in critical moments—otherwise, the inertia might have caused minor neck injuries or something. Now, I pay even more attention to keeping a safe distance.
Was this review help?
1
0
Share
Expand All
McCooper
09/27/25 3:18am
During a minor rear-end collision, the sensation inside the car is like a momentary shake, with the entire vehicle lurching forward slightly, sending vibrations throughout the body. Even while seated, I felt my shoulders being pulled tight as the seatbelt reacted instantly, preventing me from hitting the front seat. The impact was so minor that there was no loud noise—just a slight 'thud,' like driving over a speed bump. My emotions shifted from shock to relief, especially since the damage was minimal, requiring only a touch-up of paint. This minor incident also made me think about whether items in the trunk were secured, as heavy objects flying out could be dangerous. Promptly checking the door locks and brake system is a good practice to prevent follow-up issues. Developing a habit of confirming no warning lights on the dashboard before driving can help reduce risks.
Was this review help?
5
3
Share
Expand All
DeAngelo
11/10/25 5:18am
When sitting in the car during a minor rear-end collision, the sensation is like a sudden push from behind, with the car body slightly displaced by one or two centimeters. The vibration is brief but distinct. My body lurches forward slightly, but the seatbelt tightens, preventing any major issues. The sound resembles that of a door closing, at a moderate volume. Emotions might be a bit panicked, especially during the first experience. Minor rear-end collisions usually result in minimal bumper deformation, making repairs inexpensive. It's advisable to check the seatbelt locking function afterward, as some aging components may need replacement. Maintaining low-speed driving can reduce the severity of accidents.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Can a car with a bulging tire continue to drive normally?

It cannot continue to be used. Driving with a bulged car tire can easily lead to a blowout, endangering driving safety. It is necessary to replace the tire with a new one, especially during the high temperatures of summer, which makes it even more dangerous. Here are some relevant details: 1. Causes: Apart from installation and tire manufacturing reasons, most tire bulging occurs due to unexpected impacts with obstacles (e.g., potholes) during use, causing localized breaks in the tire wall's cord layers. 2. Precautions: Car tires are the direct contact point with the ground, serving as the bridge between the car and the road. If there is a problem with the tires, the car will not be able to drive normally. Therefore, car tires must be taken seriously, whether it's tire pressure or cracks in the car tires.
3
5
Share

Will there be a fine if the vehicle fails the annual inspection on time?

Vehicles that fail the annual inspection on time will be fined and have points deducted. Here are the specific details about overdue annual inspections: Relevant penalties: The penalty regulations for overdue vehicle inspections state that vehicles without an inspection are not qualified to be on the road. If they continue to be driven, they will be penalized with 3 points deducted and a fine. Insurance void: If an overdue inspection vehicle is driven without inspection and is involved in a traffic accident, the insurance company will not pay compensation. Exceeding two years: If the vehicle has not been inspected for more than two years, the vehicle file will be directly canceled. To restore the file, a fine is generally required. It is recommended to complete the inspection as soon as possible. Once the inspection is passed, the vehicle will be fully responsible for any accidents.
3
3
Share

What is the width of a small car, and how wide is the road?

Generally, a sedan is about 4.8 meters long and 1.8 meters wide. The dimensions vary depending on the model. Length: Microcars range from 3 to 4 meters, compact cars are around 4 meters, mid-size cars are about 5 meters, and luxury cars are typically over 5 meters. Here is some additional information: 1. Impact: The width usually ranges between 1.4 and 1.8 meters. Width mainly affects seating space and maneuverability. For passenger cars, if three seats are to be arranged side by side with sufficient width, the car's width generally needs to reach 1.8 meters. 2. Description: The width of a small car is usually between 1600mm and 1800mm, the length ranges from 3800mm to 4300mm, and the height is between 1400mm and 1600mm. Small cars nowadays commonly refer to sedans in the automotive category. A small car is defined as a vehicle designed to transport passengers and their personal belongings, with seating arranged between two axles, and the number of seats, including the driver, does not exceed nine.
4
0
Share

What are the 10 pre-driving vehicle inspection items?

Vehicle pre-driving 10 inspection items are as follows: Tires: If a tire bursts during high-speed driving, it can even be life-threatening. Lights: Long-distance driving places high importance on lighting, especially when traveling at night away from urban areas. Brakes: Whether for long-distance trips or daily use, the braking system is extremely important. Windshield wipers: Ensure the wipers function properly without skipping areas, and check that the wiper blades are tightly sealed against the windshield. Dashboard inspection: After starting the vehicle, make sure no warning lights are illuminated; if any are on, seek maintenance as soon as possible. Fuel: The simplest method to check fuel is by observing the fuel gauge on the dashboard. Engine oil: It's advisable to keep a spare can of oil with the same specifications in the trunk for emergencies. Coolant: When checking engine coolant, always do so when the engine is cold. The main radiator should be filled completely, while the overflow tank should be filled to about 70% capacity. Battery fluid: Simply check the viewing window on the battery. On-board tools: Such as warning triangles, fire extinguishers, and hazard lights.
17
5
Share

Can Temporary License Plates Get Traffic Violations?

Temporary license plates can also incur violations, and any illegal actions committed by the vehicle will be penalized according to the law. Below is additional information: 1. Relevant Regulations: According to Article 87 of the "Road Traffic Safety Law of the People's Republic of China," traffic police and traffic management departments of public security authorities should promptly correct any road traffic safety violations. They must impose penalties based on facts and relevant provisions of the law. For minor violations that do not affect road traffic, offenders may receive a verbal warning before being released. 2. Speeding Violations: Speeding with a temporary license plate can result in demerit points, though fines may not always apply. If the speed exceeds the limit by less than 10%, a warning is issued without a fine. Exceeding the limit by 10% or more will incur a fine. Temporary license plates are issued by the vehicle management office as provisional permits and hold the same legal effect as regular plates until official plates are obtained. Therefore, drivers must still adhere to traffic laws when using temporary plates.
20
1
Share

How Serious Is a Vehicle Sensor Malfunction?

Automotive sensor malfunctions are very serious. Introduction to Sensors: There are many sensors throughout a vehicle, and their role is extremely important. The sensors work closely together, and if one sensor fails or malfunctions, the corresponding device may not operate properly or at all, affecting the vehicle's performance. Function of Sensors: Sensors are the input devices of a vehicle's computer system. They convert various operational conditions (such as speed, temperature of different mediums, engine operating conditions, etc.) into electrical signals and transmit them to the computer, ensuring the engine operates in the optimal state. Fault Diagnosis: When diagnosing a sensor malfunction, in addition to checking the sensor itself, it is also necessary to inspect the wiring harness, connectors, and the relevant circuits between the sensor and the electronic control unit.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.