What does intensive subject two mean?

1 Answers
SkylarDella
07/25/25 10:37am
Intensive subject two refers to increasing the training time and frequency by charging students higher or additional learning fees to improve their operational proficiency. Advantages of intensive subject two: Based on the technical level and driving practice requirements of different students, individualized and systematic coaching plans are formulated to explain various operational essentials and methods in driving in a targeted manner, gradually enhancing confidence and driving experience. Through professional, sincere, patient, meticulous guidance, and well-equipped hardware facilities, students can quickly and proficiently master the essentials of subject two. Teaching objectives of subject two: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of driving on the field and within the premises, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and accurately control the vehicle's driving position, speed, and route.
Was this review help?
9
0
Share
More Forum Discussions

What is the wheelbase of the Superb?

The wheelbase of the Superb is 2761 millimeters. Below is the introduction to the three engines of the Superb: 1. 1.4-liter turbocharged engine: The 1.4-liter turbocharged engine delivers 131 horsepower and a maximum torque of 220 Nm. The engine's maximum power is achieved at 5000 rpm, and the maximum torque is available between 1750 to 3500 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 2. 1.8-liter turbocharged engine: The 1.8-liter turbocharged engine produces 160 horsepower and a maximum torque of 250 Nm. The engine's maximum power is achieved between 4500 to 6200 rpm, and the maximum torque is available between 1500 to 4500 rpm. This engine also features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 3. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine delivers 200 horsepower and a maximum torque of 280 Nm. The engine's maximum power is achieved between 5100 to 6000 rpm, and the maximum torque is available between 1700 to 5000 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
17
2
Share

Where to Make a Right Turn in a Right Turn and Straight Through Shared Lane?

When making a right turn in a right turn and straight through shared lane, you share the lane with vehicles going straight. If there are vehicles waiting ahead, you need to stop and wait for them to pass before making the right turn. The following are the rules for vehicle operation: Pay attention to lane markings: During driving, each lane has its markings. Be aware of whether the lane is a shared lane or a single lane. When passing through traffic lights, obey traffic rules, drive in order, and avoid illegal overtaking or crossing the line. Follow the yielding rules: While driving, especially when approaching a crosswalk, motor vehicles should actively yield to non-motor vehicles and pedestrians. When turning, since straight-moving vehicles at intersections usually move faster and the traffic volume is higher, while turning vehicles move slower, the principle of "turning vehicles yield to straight-moving vehicles" should be followed. This can effectively reduce road congestion and traffic accidents. If a turning vehicle fails to yield to a straight-moving vehicle and causes an accident, the turning vehicle bears full responsibility. Handling road breakdowns: If a vehicle breaks down or is involved in a traffic accident while driving in the lane, take photos as evidence, then move the vehicle to the side, turn on the hazard lights, set up a warning sign 50 meters away from the vehicle, and call the police to wait for rescue and handling.
19
4
Share

Is an imported car considered a stock car after one year?

Stock cars refer to vehicles that remain unsold for more than three months after being manufactured and leaving the factory. Due to import channels, imported cars take 1-2 months to be transported from abroad to domestic markets, so they are considered stock cars if they exceed six months. Below is an introduction to stock cars: 1. Imported stock cars: Parallel imported cars take up to three months to arrive at the port from the time they leave the foreign factory to being imported domestically, depending on the location of the foreign factory, such as the U.S., Canada, Europe, or the Middle East. However, delays in port customs clearance can prolong this period. Therefore, imported models that have been in stock for more than six months since leaving the factory are considered stock cars. 2. Methods to identify stock cars: The engine compartment's nameplate will have the manufacturing year and month marked, and the time elapsed since then is the actual stock duration of the vehicle. Imported cars with a stock duration exceeding six months can be identified as stock cars. Additionally, if there are noticeable signs of aging on parts like wipers, engine belts, or tires, the car can also be considered a stock car. Lastly, you can check the battery by trying to power high-consumption electrical devices like high beams for about 10 minutes with the engine off. If the battery cannot sustain this, it is likely a stock car.
13
0
Share

What to do if the BMW X5 trunk cannot be closed?

The trunk cannot be closed because the position of the trunk lock block limiter is too low, preventing it from locking. You can remove the decorative panel on the north side of the trunk to access the limiter block and then adjust the M8 screw. More information about the BMW X5 is as follows: 1. Exterior Design: Every contour of the new-generation BMW X5 exudes a powerful presence, inheriting the X family design language. It continues the design elements seen in the previously released X3, with the most notable feature being the enlarged iconic kidney grille, which is now connected in the middle. The X-shaped intelligent laser headlights and the 3D floating taillights complement each other, with a lighting range of up to 500 meters. The blue "X" shape inside the headlights gives a futuristic feel, while the large hexagonal kidney grille and dynamic waistline flow seamlessly. Additionally, the active grille can automatically close during water crossings to reduce the risk of water entering the engine compartment. The entire front fascia incorporates aerodynamic components from the M series, giving it a highly sporty appearance. 2. BMW X5 Body Dimensions: The length, width, and height dimensions are 4930mm/2004mm/1776mm, respectively, with a wheelbase of 2975mm. Visually, the BMW X5 features a short front overhang and a long hood design, making it appear very large.
6
3
Share

Within how many years must a driver's license be obtained?

The driver's license examination period is 3 years. The 3-year validity period starts from the issuance of the study driving certificate after passing the subject 1 exam. According to regulations, the remaining subjects must be completed within 3 years, otherwise all previously passed subject exam results will be invalidated. If you still need to obtain a driver's license, you must re-register and retake all subjects. The following are the contents of the driver's license examination: 1. Subject 1: Subject 1 theoretical exam, also known as the driver theory test, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. 2. Subject 2: Also known as the small road test, it is the abbreviation for the field driving skills test. The test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving. 3. Subject 3: Also known as the big road test, it assesses road driving skills for motor vehicle drivers. The content varies depending on the type of vehicle being licensed. 4. Subject 4: Also known as the Subject 4 theoretical exam or driver theory test. The test paper consists of 50 questions, primarily in the form of case studies, images, animations, etc., with a full score of 100 and a passing score of 90.
5
1
Share

What does the ECO light on the car dashboard mean?

"When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode has been activated. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the dashboard ECO indicator light comes on, it signifies that the vehicle's economy mode is engaged. ECO mode can be categorized into active and passive types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button; when the dashboard ECO indicator light comes on, it serves merely as a reminder function. The ECO system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ the active ECO driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the ECO mode. However, it is unnecessary to enable ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO mode but also negatively impact the vehicle's power performance. Additionally, the ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the ECO mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not operate under these conditions either.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.