What does independent lane change mean in Subject 3?

1 Answers
AliyahFitz
07/30/25 2:15am
Independent lane change refers to the driver selecting an appropriate lane to change to and choosing the most reasonable lane for driving. Below are detailed explanations about independent lane change: 1. Lane change method: Pay close attention when changing lanes and turning, avoid arbitrary turns and lane changes. Before turning, always observe the situation in the rearview mirror in advance, and try to understand the conditions on both sides and behind the vehicle as much as possible. Do not make any turns arbitrarily without clearly seeing the rearview mirror. 2. Precautions: Turn on the turn signal and honk the horn in advance when turning or changing lanes, try to move to the side as early as possible, and turn smoothly. Always slow down in advance and yield to vehicles and pedestrians going straight when entering or exiting non-motorized lanes. 3. Careful observation: Slow down and wait before exiting a gate or turning from a small road onto a main road, and always observe the road conditions on both sides clearly.
Was this review help?
10
4
Share
More Forum Discussions

What are the differences between BMW X1 and X3?

Differences between BMW X1 and X3: 1. Different engines: The BMW X1 is equipped with a 1.5t three-cylinder turbocharged engine; the BMW X3 is equipped with a B48 model four-cylinder engine. 2. Different transmissions: The BMW X1 uses a 7-speed dual-clutch transmission; the BMW X3 uses an 8-speed automatic transmission. 3. Different dimensions: The BMW X1 has a length, width, and height of 4484mm, 1798mm, and 1577mm respectively, with a wheelbase of 2760mm; the BMW X3 has a length, width, and height of 4717mm, 1891mm, and 1689mm respectively, with a wheelbase of 2864mm.
18
0
Share

What brand of car features two semicircles?

The two semicircles represent the NIO brand's vehicles. Taking the NIO ES6 as an example, it is a pure electric mid-size SUV with dimensions of 4850mm in length, 1965mm in width, and 1758mm in height, and a wheelbase of 2900mm. The car features a dual-motor all-wheel-drive system, with a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The NIO ES6 is equipped with a permanent magnet synchronous motor, paired with a fixed gear ratio transmission. This motor delivers a maximum power of 320kW, a maximum torque of 610Nm, and a maximum horsepower of 436ps. The battery type for the motor is a ternary lithium battery.
17
2
Share

What is the engine model of the Lynk & Co 03+?

The engine model of the Lynk & Co 03+ is JLH3G15TD, which is equipped with a 1.5T turbocharged engine and paired with a 6-speed manual transmission. This engine has a maximum power of 115kW, a maximum torque of 245Nm, a maximum power speed of 5000rpm, and a maximum torque speed range of 1450 to 4000rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The dimensions of the Lynk & Co 03+ are 4639mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm. The car adopts a front-engine, front-wheel-drive layout, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
5
0
Share

What does a red battery indicator on the dashboard mean?

A red battery indicator on the dashboard is a warning that the engine is not generating electricity. You should: 1. Check if there is oxidation on the battery terminals. If there is, clean and polish them before reinstalling and testing the vehicle, as oxidation can hinder battery charging; 2. Check for any signs of looseness in the battery's positive and negative cables. The reasons for this indicator light appearing include: 1. The generator belt is loose or slipping; 2. The generator is producing insufficient power; 3. The battery is damaged; 4. The generator's rectifier bridge is damaged, causing uncontrolled output voltage; 5. The generator belt is broken, the generator is damaged, or the positive/negative cables are broken; 6. Electrical device short circuits can also cause the indicator light to illuminate, though the brightness may not be very strong.
4
0
Share

How often should the coolant be changed in the new Lavida?

The coolant in the new Lavida should be changed every two years. Coolant prevents the freezing of the liquid in the cooling system during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. It is commonly used in automobiles, railway diesel locomotives, tractors, ships, engines, radiators, and various mechanical equipment, as well as in the cooling systems of diesel and gasoline engines. Coolant offers multiple functions, including antifreeze, anti-boil, anti-corrosion, and anti-scale. The Lavida measures 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. The car is available with two engine options: a 1.6L naturally aspirated engine and a 1.4TSI engine.
4
0
Share

How to start the car when the Sylphy key battery is dead?

Sylphy key battery dead starting methods: 1. If the car is not equipped with a one-touch start intelligent control system, simply use the mechanical key to start; 2. If equipped with a one-touch start intelligent control system, shift the gear lever to P position, firmly press the foot brake, touch the ignition switch with the smart key, and within 10 seconds of the buzzer sounding, press the brake pedal and push the ignition switch. The Sylphy's dimensions are 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. The car's safety features include an engine immobilizer system, hill start assist system, vehicle dynamic control system, tire pressure monitoring system, electronic brake force distribution system, anti-lock braking system, and emergency brake warning system.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.