What does increased battery discharge in BMW Z4 mean?

Why does 12123 not show the option for license renewal upon expiration?

If 12123 does not display the option for license renewal upon expiration, it indicates that the conditions for renewal are not met, possibly due to incomplete materials or failure to submit a medical examination report. Below are specific details about driver's license renewal: Renewal Regulations: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of their license, they can renew it for a ten-year validity period. If they maintain this record during the ten-year validity period, they can renew for a long-term valid license. Content: A motor vehicle driver's license records the holder's ID number, name, gender, date of birth, permanent address, nationality, permitted vehicle type code, initial issuance date, validity period, and management records. It also includes the issuing authority's seal, file number, and the holder's photo. The design of the motor vehicle driver's license is stipulated by the Ministry of Public Security.

9

3

Share

How to reset the tire pressure on a Mercedes-Benz C200?

Mercedes-Benz C200 tire pressure reset method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to illuminate. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, only replacement with a new part is possible.

9

4

Share

What to Do If Your Car Gets Rear-Ended?

Methods for handling a rear-end collision: 1. Stop the vehicle immediately, protect the scene, and preserve evidence; 2. If there are no personal injuries, you can negotiate compensation on your own. If there are personal injuries, immediately provide first aid to the injured and call the police; 3. Keep the hazard warning lights on to prevent further accidents. More details are as follows: Article 14 of the "Road Traffic Accident Handling Procedures": In case of property damage accidents with any of the following circumstances: 1. The motor vehicle lacks an inspection qualification mark or insurance mark. 2. Collision with buildings, public facilities, or other structures. In such cases, if the vehicle can be moved, the involved parties should organize the evacuation of passengers to a safe location off the road. Under the principle of ensuring safety, evidence should be fixed by taking on-site photos or marking the position of the accident vehicles. After moving the vehicles to a location that does not obstruct traffic, call the police.

12

1

Share

What to Do When the Car Won't Start Due to No Power?

The solution to a car not starting due to no power is to perform a jump-start or replace the battery if it's dead. If the battery is undercharged or leaking, it should be replaced; otherwise, it may lead to the vehicle failing to start and a loss of power to onboard loads. Here are some relevant details about the battery: 1. When the ammeter indicates insufficient charge, recharge promptly. If you find the battery low while on the road and the engine won't start, as a temporary measure, you can seek help from another vehicle to jump-start your car by connecting the negative terminals and positive terminals of both batteries; 2. If the electrolyte level is low, replenish it with distilled water or a specialized replenishing fluid. Never use drinking water as a substitute, as it contains various trace elements that can adversely affect the battery; 3. Continuously cranking the engine can damage the battery due to excessive discharge. The correct method is to limit each starting attempt to no more than 5 seconds, with intervals of at least 15 seconds between attempts.

11

4

Share

How to Fix a Cigarette Lighter That Won't Pop Out When Pressed?

If the cigarette lighter won't pop out, it may be due to poor contact from prolonged disuse. You can try pulling it out by hand, but avoid using excessive force. Gently twist and pull it vertically upwards. If you notice the lighter glowing red and functioning normally, the issue likely lies with a faulty spring clip in the socket. If it's not glowing red and simply won't eject, the problem may be a blown fuse cutting power to the lighter, preventing normal operation. In this case, you can replace the cigarette lighter fuse yourself by following these steps: 1. Locate the vehicle's fuse box - it may be in the glove compartment or under the dashboard depending on your car model. 2. Open the fuse box cover and refer to the fuse position diagram on the inner side to identify the cigarette lighter fuse. 3. Use the provided fuse puller to remove the blown fuse and install a new or spare cigarette lighter fuse.

12

3

Share

What to Do If the Dash Cam Keeps Falling Off the Windshield?

The solutions for a dash cam that keeps falling off the windshield are as follows: 1. Use 3M adhesive and bonding promoter to secure the dash cam firmly. 2. Before installing the dash cam, ensure the installation area on the windshield is clean. 3. The area where the adhesive-mounted dash cam is installed must be dry. You can use a hairdryer to heat the adhesive for better adhesion. 4. For suction cup-mounted dash cams, applying a little water to the suction cup before attaching it to the windshield can improve stability. Below is an introduction to dash cam installation: (1) Before installing the dash cam, first determine the installation location. It is best to choose a central position, slightly to the right of the rearview mirror, as this provides a straight shooting angle and more convincing evidence. Many dash cams are designed in the form of a rearview mirror, allowing direct replacement of the original rearview mirror. (2) After determining the installation location, the owner should plan the wiring route virtually to understand the general path and then confirm the power cable placement.

15

4

Share

What does increased battery discharge in BMW Z4 mean?

Why does 12123 not show the option for license renewal upon expiration?

How to reset the tire pressure on a Mercedes-Benz C200?

What to Do If Your Car Gets Rear-Ended?

What to Do When the Car Won't Start Due to No Power?

How to Fix a Cigarette Lighter That Won't Pop Out When Pressed?

What to Do If the Dash Cam Keeps Falling Off the Windshield?

What is the fuel tank capacity of the 2015 Hyundai Tucson in liters?

Does new antifreeze have an expiration date?

How soon can I retake the driving test for Subject 3?

Does a 2015 vehicle require an annual inspection this year?