What does 'illumi' mean in a car?

What does it mean when the car check light is on?

When the car check light stays on, it indicates that the engine has developed a fault. Here is additional information about the check light staying on: 1. Possible causes for this situation include poor engine combustion state, engine knocking, poor fuel quality, dirty engine cylinders with accumulated carbon deposits, etc. 2. If you notice the check light is on, you should promptly go to a repair shop or 4S store for inspection and repair as instructed in the driver's manual. You can initialize the engine control system, and the fault light may turn off temporarily. However, if the light comes back on after driving for a while, excluding false alarms from the system, you should then proceed to a 4S store for maintenance. Failure to repair it in time may affect the normal operation of the engine, potentially causing damage to the engine.

11

3

Share

Why Do Vehicles Need to Add Urea?

Vehicles add urea to reduce harmful gas emissions and comply with national regulations. Below are the specific reasons why vehicles need to add urea: Reducing harmful gas emissions: The NOx in diesel engine exhaust is mainly nitric oxide (NO). If the concentration of NO is too high, it can affect human pulmonary function and cause central nervous system disorders. Additionally, NO gradually converts into nitrogen dioxide (NO2) in the air. NO2 has a strong irritating odor, and inhalation can lead to respiratory diseases. It is also one of the main causes of acid rain. National regulations: Due to the significant harm to humans and the environment, China's National IV emission standards implemented in 2008 mandate that diesel vehicles must use automotive urea in their emission reduction systems.

19

4

Share

Where is the tire pressure monitoring in Lavida?

The tire pressure in Lavida is displayed on the instrument panel, and the tire pressure monitoring is automatic. If there is any abnormality in the tire pressure, an alarm will be triggered automatically. Here is some relevant information about the tire pressure monitoring in Lavida: 1. The SET in the new Lavida is the tire pressure monitoring system: If the SET light is on, it indicates that the tire pressure of a wheel does not match the stored value. When the pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels, which can easily lead to traffic accidents. 2. If the tire pressure monitoring light flashes: It means there is a fault in the system. 3. The ideal tire pressure for the new Lavida is 2.2: This provides a good balance between comfort and fuel consumption.

19

0

Share

How to open the hood of a Kia K3?

Method to open the hood of a Kia K3: Pull the hood release cable, push the latch lever to the left, and then lift the hood. More information about the Kia K3 is as follows: 1. The Dongfeng Yueda Kia K3 shares the same platform design with the Hyundai Elantra, providing more passenger space. 2. The Dongfeng Yueda Kia K3 is equipped with the same powertrain as the Hyundai Elantra: 1.6L and 1.8L engines. 3. The dimensions of the Yueda Kia K3 are: 4600mm in length, 1780mm in width, and 1445mm in height. 4. The 1.6L engine model has a maximum power output of 93.8kW and a maximum torque of 155.5Nm; the 1.8L engine has a maximum power output of 107kW and a maximum torque of 175Nm.

8

5

Share

What Causes Vehicle Body Vibration During High-Speed Braking?

High-speed braking-induced vehicle body vibration can be attributed to the following causes: 1. Uneven brake disc surfaces with excessive radial runout: This creates inconsistent contact between brake pads and discs, resulting in fluctuating braking force that manifests as body vibration, particularly noticeable during light braking. 2. Significant wheel alignment deviations: Incorrect front wheel alignment angles or excessive toe-in can make the vehicle difficult to control during acceleration, though the vibration is typically mild. 3. Improper tire pressure: Overinflation causes increasingly severe vibration at higher speeds, while underinflation leads to both vibration and steering pull.

7

1

Share

What maintenance should be done for a car at 50,000 kilometers?

Car maintenance items at 50,000 kilometers are introduced as follows: 1. Replace engine oil and filter: Generally, manufacturers recommend replacing the engine oil every 5,000 kilometers or six months. When replacing the engine oil, the oil filter must be replaced at the same time, otherwise it will affect the quality of the lubricating oil. 2. Check and replace brake pads: During inspection, it should be noted that the thickness of new brake pads is generally about 1.5cm. If the brake pads are worn to only about 0.3cm thick, they need to be replaced in time. 3. Check and replace spark plugs: If there is carbon deposit or black oil stains on the spark plugs, they should be cleaned, and replaced if necessary.

4

5

Share

What does 'illumi' mean in a car?

What does it mean when the car check light is on?

Why Do Vehicles Need to Add Urea?

Where is the tire pressure monitoring in Lavida?

How to open the hood of a Kia K3?

What Causes Vehicle Body Vibration During High-Speed Braking?

What maintenance should be done for a car at 50,000 kilometers?

What is the difference between the Challenger and the Hellcat?

How to Reset the Maintenance Reminder in a Car?

Which country is Volkswagen from?

Why Are There Exclusive Models in China?