···
Log in / Register

What does Hyundai 240TGDi mean?

5 Answers
LeReed
07/24/25 1:24am

Fista 2019 240TGDi Comfort Edition National VI is a vehicle produced by Beijing Hyundai. Below are the relevant details: 1. Definition: Fista is a compact car under Beijing Hyundai, manufactured by Beijing Hyundai. This car model is classified as a compact car, with a fuel consumption of 5.4-6.1L and an engine displacement ranging between 1.4T to 1.6T. 2. Exterior and Space: The Fista has a stylish appearance, with a low-profile body and a sleek rear design that can be described as perfect. The headlights are also sharp. The rear seating legroom is approximately two to three fists wide, and three people can sit in the back without feeling crowded. The interior storage space is relatively limited, but the trunk has a large capacity.

Was this review help?
2
4
Share
SanJasmine
08/10/25 8:45pm

I have a lot of driving experience. The Hyundai 240TGDi is a naming convention for Hyundai engines, where 240 indicates a maximum torque of approximately 240 Newton-meters, delivering strong power output, quick acceleration, and a noticeable push-back feeling. The 'T' stands for Turbo, which adds a compressor to allow more air intake, enhancing performance. GDi is short for Gasoline Direct Injection, meaning the fuel is directly injected into the cylinders for more efficient combustion. Overall, this type of engine is used in models like the Sonata or Fista, offering stable and reliable performance with good fuel consumption control, averaging around 7-8L/100km, making it suitable for both city and highway driving. However, it's important to note that turbo components require regular maintenance, and avoiding prolonged high-speed driving can help protect the engine's lifespan. Hyundai's technological development is impressive, as this design balances both power and fuel efficiency.

Was this review help?
19
4
Share
Expand All
LailaAnn
09/24/25 3:05am

Driving a Hyundai with the 240TGDi engine feels quite exhilarating in daily use. The '240' stands for a torque value of 240Nm, delivering strong acceleration and agile starts. The T (turbocharger) ensures quick engine response, making overtaking effortless. The GDi system directly injects fuel, improving gasoline utilization for better fuel efficiency and tangible savings. I use it in an Elantra, which boasts low fuel consumption and reduced emissions, meeting environmental standards. However, don't overlook maintenance—like checking the turbo's condition during oil changes to prevent aging issues. Overall, it offers smooth and reliable performance.

Was this review help?
9
3
Share
Expand All
DeOscar
11/07/25 5:17am

240TGDi represents an efficient engine in Hyundai vehicles, with 240 indicating strong torque, T for turbocharging to enhance low-RPM efficiency, and GDi for direct injection ensuring clean combustion and fuel economy. I highly value sustainability, and this technology reduces emissions while delivering balanced power. Real-world fuel consumption is reasonable, making it environmentally friendly. Compared to traditional engines, it offers stronger performance while being more eco-conscious.

Was this review help?
4
2
Share
Expand All
McBradley
12/28/25 7:02am

The naming convention of Hyundai's 240TGDi is quite straightforward. The 240 refers to a torque of 240 Newton meters, T stands for turbocharged power assistance, and GDi represents gasoline direct injection technology optimized for combustion. It is used in multiple models such as the Tucson, significantly enhancing the driving experience. The gasoline efficiency is high with less carbon buildup. The engine has a long lifespan.

Was this review help?
2
2
Share
Expand All
More Forum Discussions

How to Control Excessive Speed When Climbing in Subject 2?

The method to control excessive speed when climbing in Subject 2 is: Master the correct posture of the clutch, keep your heel as close to the ground as possible, and bend your knees when the clutch is fully depressed. If the vehicle speed gets out of control, stay calm, first fully depress the clutch, then fully depress the brake. Avoid wearing hard-soled shoes as they hinder the perception of the clutch's position. Always operate the clutch with the correct posture and standards to prevent slipping. The reasons for insufficient power when climbing in Subject 2 are: 1. Lifting the clutch too quickly, causing the power to lag and the vehicle to roll back; 2. Releasing the handbrake without applying the throttle, resulting in no climbing power.
13
5
Share

What is the current equivalent of 93-octane gasoline?

93-octane gasoline is now equivalent to 92-octane. Standard gasoline consists of isooctane and n-heptane. Isooctane has good anti-knock properties, with its octane rating defined as 100; n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with its octane rating defined as 0. If gasoline is labeled as 92-octane, it means that this grade of gasoline has the same anti-knock properties as standard gasoline containing 92% isooctane and 8% n-heptane. Gasoline is a volatile, flammable liquid hydrocarbon mixture obtained from petroleum through distillation or cracking processes, primarily used as fuel for spark-ignited internal combustion engines.
10
0
Share

What is the working principle of Toyota's Dual Hybrid system?

The working principle of Toyota's Dual Hybrid system involves converting kinetic energy during braking into electrical energy, and it can also shut off the engine when the vehicle is stuck in traffic. Unlike traditional gasoline-powered cars, Toyota's Hybrid System (THS) does not use a dedicated starter when the engine starts; instead, it utilizes the generator to initiate the engine. The advantages of this system: The power transmission device consists of two motors (MG1, MG2), a compound gear mechanism, an Atkinson cycle engine, an inverter assembly, and an HV battery, along with the HVECU. This system can distribute power transmission under various operating conditions using the engine and the HV high-voltage battery, featuring low pollutant emissions and smooth acceleration. Introduction to Dual Hybrid: Dual Hybrid is the Chinese name for Toyota's hybrid technology. As the name suggests, it has two 'engines' that jointly drive the vehicle: a gasoline engine and an electric motor (hybrid). These two power units can operate individually or collaboratively based on different conditions and user needs, making the Dual Hybrid's driving mode highly efficient with notably significant fuel-saving effects.
6
2
Share

Does Toyota Have a Particulate Filter?

Toyota vehicles do not have a particulate filter. The Diesel Particulate Filter (DPF) is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. To check whether a vehicle has a particulate filter, follow these steps: 1. Visit the official website of the Motor Vehicle Environmental Protection Network and click on the 'Public Query Platform' at the bottom right of the page; 2. Select the vehicle model according to the owner's specifications, then enter the vehicle's VIN code and the last six digits of the engine number to proceed with the query. Taking the Corolla 2021 1.2T S-CVT Pioneer PLUS Edition as an example: its dimensions are 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. It is equipped with a CVT continuously variable transmission (simulating 10 gears) and has a top speed of 180 kilometers per hour.
4
5
Share

What to Do If There's Color Difference in DIY Spray Painting?

If the color appears slightly darker within one month after spray painting, it might be because the paint hasn't fully dried. However, if it remains darker after a month, then the color is incorrect. The color ratio wasn't properly mixed, so it's recommended to repaint. You can go to a 4S shop for repainting, but a full-body repaint isn't necessary—transitional spray painting techniques can be used instead.
7
0
Share

What Gear to Use at What Speed?

Generally, start in first gear, then shift to second gear after driving a few meters; shift to third gear when the speed reaches above 20 mph but below 35 mph; shift to fourth gear when the speed reaches above 35 mph but below 45 mph; and shift to fifth gear when the speed exceeds 45 mph. Below are the speed ranges and techniques for shifting gears in a car: Speed ranges for each gear: 1st gear: Below 15 km/h; 2nd gear: 15 km/h - 30 km/h; 3rd gear: 30 km/h - 40 km/h; 4th gear: 40 km/h - 60 km/h; 5th gear: 60 km/h - 70 km/h; 6th gear: Above 70 km/h. Car shifting techniques: Master the clutch pedal by practicing frequently and maintaining stability. Develop good habits: press the clutch all the way down and release it slowly. Coordinate the throttle and clutch: when starting, engage first gear, release the clutch slowly, and apply throttle at the half-clutch point. Only fully release the clutch after the car starts moving. Know the right time to shift gears: shift when the engine reaches around 2000 RPM. First reduce the throttle, then press the clutch to avoid forced disengagement, and then shift. The gear-shifting sequence must be 1st → 2nd → 3rd → 4th → 5th—skipping gears is not recommended. Downshift based on speed: generally, downshift when the engine RPM drops below around 1500 RPM, depending on the car's condition.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.