What does Honda fuel pump recall mean?

1 Answers
DelQuinn
07/29/25 9:42pm
Honda fuel pump recall refers to the process where the manufacturer of defective automotive products must eliminate product defects in accordance with legal requirements and procedures due to existing fuel pump malfunctions. Reasons for the fuel pump recall: Due to imperfect resin molding conditions during the manufacturing process of the fuel pump impeller, the resin density of the impeller is insufficient, resulting in poor fuel pump performance and failure to supply fuel normally to the engine. In extreme cases, this may cause the engine to stall while driving, posing a safety hazard. Consequences of replacing the fuel pump: Replacing the fuel pump does not involve disassembling the engine or transmission; it only requires removing the rear seat for replacement, which has minimal impact on the vehicle's subsequent use.
Was this review help?
5
5
Share
More Forum Discussions

What is the service life of tensioner pulleys and idler pulleys?

Tensioner pulleys and idler pulleys can last for different durations depending on the vehicle's usage and environmental conditions. The recommended inspection and replacement interval is every 3 years or 60,000 kilometers. Here are the specific details about the usage of tensioner pulleys and idler pulleys: Usage: Tensioner pulleys and idler pulleys have relatively long maintenance and replacement cycles, falling under the category of mid-term maintenance. Generally, it is more scientific to replace them as a set with components in the accessory system or timing system. They are typically replaced together with the timing belt or accessory belt, ensuring better coordination when new. High-quality tensioner pulleys can last up to 80,000 kilometers, while lower-quality ones may have a shorter lifespan and pose safety risks.
5
4
Share

Why does the newly replaced wiper blade leave water streaks and not clean properly?

Newly replaced wiper blades may not clean properly and leave water streaks due to oil film on the windshield or mismatched wiper blades. Here are the detailed explanations: Oil film on the windshield: When a vehicle is exposed to the natural environment, the fine pores on the glass can enlarge over time, absorbing exhaust fumes and oil mist from the air to form an oil film. Simply relying on wiper blades and windshield washer fluid is not enough to remove the oil film; a dedicated oil film cleaner must be used. Mismatched wiper blades: If the wiper blades do not match, they may not fully adhere to the glass. Refer to the vehicle manual to confirm the correct wiper blade model. Also, check whether the connection method between the wiper arm and the blade is compatible.
11
2
Share

What Does Dual Engine Hybrid Mean?

Dual Engine refers to the installation of two power engines, a fuel engine and an electric motor. The hybrid technology of Dual Engine (HEV technology) belongs to the full hybrid technology. Unlike other mild hybrid technologies, it has both an engine and an electric motor as power sources, significantly improving power performance while greatly reducing fuel consumption. It is a technology that balances tradition and the future, effectively implementing energy saving and emission reduction, hence the name Dual Engine. Advantages of Dual Engine Hybrid: During operation, it achieves maximum power while operating under optimal conditions of low fuel consumption and minimal pollution. When the internal combustion engine's power is insufficient, the battery's power can supplement it. Since the internal combustion engine can operate continuously, the battery is constantly recharged, allowing it to travel the same distance as a conventional car. Dual Engine Hybrid Models: Enjoyment, Lingpai, INSPIRE, Spirior, Accord, Haoying.
3
2
Share

How to Reverse Park into a Garage?

Reverse parking techniques are as follows: 1. Adjust the left and right rearview mirrors. The driver should adjust the mirrors to a suitable angle for better visibility of the ground markings. 2. Use the rearview mirrors when reversing. It's essential to look at the rearview mirrors and learn how to use them correctly during reverse parking. 3. Maintain proper distance between the car body and the sideline. The requirement for reverse parking is to keep the vehicle about 1.5 meters away from the starting line and the roadside line. 4. Control the speed. There are specific speed requirements for reverse parking; never drive too fast when entering the garage. This may require the use of the clutch, so drivers should practice clutch control. Slower speeds are generally better, but excessively slow speeds should also be avoided. Therefore, drivers should practice clutch operation regularly to achieve stable and precise control.
8
1
Share

How many liters of oil does a BMW X3 need for an oil change?

BMW X3 should be filled with approximately 4.8L of engine oil, as this vehicle is equipped with a turbocharged engine. It is recommended to choose full synthetic oils from brands such as Mobil, Shell, or Castrol. Before the maintenance period is reached, the oil used in the car fully meets the overall working conditions of the vehicle. After the warranty period, it is recommended that owners choose higher-performance full synthetic oil when changing the oil. The oil is not necessarily better the higher the grade; only the oil that suits your vehicle is the best. Here are some related introductions about engine oil: 1. There are three types of engine oil used in cars: mineral oil, semi-synthetic oil, and full synthetic oil. Compared to the other two types, full synthetic oil has a longer service life and provides better lubrication. 2. Generally speaking, the service life of these three types of oil is about 5,000 kilometers for mineral oil, about 6,500 kilometers for semi-synthetic oil, and about 10,000 kilometers for full synthetic oil. 3. When changing the engine oil, it is essential to replace the oil filter as well. The main purpose of replacing the oil filter is to prevent impurities from mixing into the oil. The oil filter can remove impurities, metal shavings, sludge, and other substances from the oil, ensuring that the oil remains clean and pure.
18
3
Share

What Determines the Speed Difference Between 4.11 and 3.7 Axle Ratios in Tractors?

Tractor axle ratios of 4.11 and 3.7 are related to engine and transmission RPM. Here are the specifics: 1. Faster with 3.7 ratio: When the transmission is in overdrive and the engine runs at 1500 RPM, a 3.7 ratio vehicle can reach 105 km/h, while 4.11 only achieves 95 km/h. 2. Faster with 4.11 ratio: In direct drive transmission mode at 1500 RPM, a 3.7 ratio vehicle reaches 83 km/h, whereas 4.11 attains 74 km/h.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.