What does 'hold' mean on a car key in Chinese?

1 Answers
DiMariana
07/29/25 8:26pm
The DUAL switch on a car is an air conditioning zone control button, usually displayed together with AUTO. Here's what the DUAL function does: 1. Temperature adjustment: DUAL indicates dual-zone, allowing separate adjustment of the air conditioning temperature for the driver's seat or the passenger seat, meeting the different temperature requirements of passengers in two different positions inside the car. Independent temperature zones can be adjusted and switched freely between different temperature differences. 2. Automatic air conditioning: AUTO means automatic air conditioning. When pressed, the air conditioning will automatically adjust the temperature and airflow based on weather, road conditions, etc. 3. Other information: The DUAL switch may vary in different car models. Most models now call it the SYNC switch, and its working principle is roughly the same as the DUAL switch. Not all car series use the name DUAL; some models use the SYNC button for adjustment. The name of this button may differ depending on the car model, but the function is basically the same.
Was this review help?
1
3
Share
More Forum Discussions

How many kilometers are required for Subject 3 driving test?

Large and medium-sized buses: The test distance for large buses and medium-sized buses should be no less than 20 kilometers, including no less than 10 kilometers during daytime and no less than 5 kilometers at night. Large vehicles: The test distance for tractors, city buses, and large trucks should be no less than 10 kilometers, including no less than 5 kilometers during daytime and no less than 3 kilometers at night. Small vehicles: The test distance for small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled should be no less than 3 kilometers, with no less than 20% conducted at night; if no night test is conducted, a simulated nighttime light usage test should be performed.
3
5
Share

Where to Process Driver's License Annual Review?

Driver's license annual review is generally conducted at the local Vehicle Management Office where the vehicle is registered. Required documents for the annual review include: the original copy of the driver's license, ID card, and the physical condition certificate for motor vehicle drivers. Below is relevant information: 1. Large buses, tractors, medium-sized buses, and large trucks: Drivers of large buses, tractors, medium-sized buses, and large trucks (i.e., A1, A2, B1, B2) or school bus drivers need to undergo annual review. 2. Application for residence certificate: If a motor vehicle driver resides outside the jurisdiction of the issuing Vehicle Management Office, they can apply for a certificate at the local Vehicle Management Office where they reside. 3. Nearby processing: Regardless of which province or city the motor vehicle driver's license was obtained, if the driver is in a different location, they can process license renewal, replacement, or report a lost license at any time at the nearest traffic management department where they reside.
12
2
Share

Does Replacing the Rear Quarter Panel Require Cutting the C-Pillar?

Replacing the rear quarter panel does not require cutting the C-pillar. Below is some information about replacing the rear quarter panel: 1. Rear Quarter Panel: Cutting does not affect the C-pillar. The rear quarter panel, also known as the rear apron, is often the first to be damaged in a rear-end collision, right after the rear bumper. 2. Rear Apron: Simply drilling out the weld spots on the rear apron can take half a day, and welding it back requires additional steps like applying sealant, making the process quite cumbersome. The time spent replacing the rear apron could be used to handle several minor accidents, so the decision to replace or repair depends on the actual situation. If the rear apron is slightly dented, it can be slowly pulled out using a frame or a pull hammer without needing to cut the rear apron.
10
0
Share

What Are the Tips for Choosing a Car License Plate Number?

Here are the specific tips for choosing a car license plate number: 1. Make good use of the selection time: The time limit for self-selection and one-time selection is 5 minutes. If you don't select a number the first time, you can try again after five minutes. 2. Utilize the selection rules fully: When selecting a number, make sure to fully utilize the selection rules. Prepare three numbers in advance and input them in order on the selection machine. 3. Make use of the similar number query function: If all three numbers you input have already been taken, you can use the similar number query function. The selection machine will provide 6 similar numbers based on the rules of the first number you input, and you can choose from these 6 numbers.
5
5
Share

What are the damages of pulling the electronic handbrake while driving?

Pulling the electronic handbrake while driving can cause significant damage to the vehicle's braking system, so it's best not to attempt emergency braking functions casually unless in an emergency. The electronic handbrake is a technology that achieves parking braking through electronic control, with the same working principle as a mechanical handbrake—both rely on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the traditional mechanical handbrake lever to an electronic button. Additional information: 1. Correct usage of the electronic handbrake: With the brake pedal pressed and the vehicle stationary, pull the electronic handbrake button upward. The driver can see a red electronic handbrake symbol on the dashboard, indicating that the electronic handbrake is engaged. 2. How to release the electronic handbrake: Shift the gear into D, press the accelerator, and the electronic handbrake will release automatically; or press the brake pedal and push the electronic handbrake button downward.
14
5
Share

How to Clean the Car Air Conditioning Filter?

To clean the car air conditioning filter, if it is too dirty, replace it directly. If it is not particularly dirty, you can use a hair dryer to blow the filter clean from the inside out. Below is some relevant information about car air conditioning filters: 1. Types: There are two types of air conditioning filters, one is the standard type, and the other contains activated carbon (please confirm before purchasing). The activated carbon filter not only performs the functions mentioned above but also absorbs a large amount of odors. 2. Functions: (1) Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. (2) Separates solid impurities such as dust, pollen, and grinding particles from the air. (3) Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it can strongly and persistently adsorb moisture.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.