What does Highlander Dual Engine mean?

2 Answers
LeWilliam
07/29/25 9:25pm
Highlander Dual Engine refers to the hybrid technology (HEV technology) of "Dual Engine", which belongs to the full hybrid technology. The following is a partial introduction about hybrid models: Advantages: Hybrid vehicles have high fuel economy performance and superior driving performance. The engine of hybrid vehicles uses fuel, and the electric motor: With the assistance of the electric motor, fuel consumption can be reduced. Simply put, compared with cars of the same size, the fuel cost is lower. Basic information: The vehicle's drive system is composed of two or more individual drive systems that can operate simultaneously. The driving power of the vehicle is provided by a single drive system alone or jointly according to the actual driving state of the vehicle. Due to the different components, arrangement methods and control strategies, multiple classification forms are formed. The energy saving and low emission characteristics of hybrid vehicles have attracted great attention in the automotive industry and have become a key point in automotive research and development.
Was this review help?
11
4
Share
KiraMarie
08/15/25 8:10pm
I think the Highlander Hybrid is simply the hybrid version of this model, featuring a combination of a gasoline engine and an electric motor. While driving, the two power sources intelligently switch or work together, making it more fuel-efficient and quieter than a conventional gasoline car. For example, in city traffic jams, the electric motor can propel the vehicle alone without burning fuel, which is both eco-friendly and cost-saving. On highways, the engine takes over to provide stable power. This system utilizes Toyota's THS technology, achieving seamless energy transitions through a complex planetary gear set, making it as smooth to drive as a regular car. Maintenance isn’t particularly troublesome either—the battery has a long lifespan, and routine servicing is all that’s needed. Overall, the Hybrid makes the Highlander a practical and versatile family SUV, worry-free and efficient, especially suitable for young people commuting or weekend trips, without concerns over high fuel consumption or pollution.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What type of vehicle is the Land Cruiser?

Land Cruiser is a flagship large-sized SUV, a full-size off-road vehicle. Its prototype is the Toyota Jeep BJ. The vehicle's dimensions are 5170mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm. It features a double-wishbone independent front suspension and a four-link non-independent rear suspension. The domestic version of the Land Cruiser is equipped with two engines: a 4.0-liter naturally aspirated engine and a 4.6-liter naturally aspirated engine. While inheriting the original design DNA, its exterior evolves towards a fresh, advanced style of the new era. This is a hardcore off-road vehicle with four-wheel drive and four-wheel disc brakes.
12
3
Share

What are the Nissan car brands?

Nissan car brands include Subaru, Mitsubishi, Honda, Toyota, Nissan, Mazda, Lexus, Acura, Infiniti, etc. Nissan is a company whose business covers automobile manufacturing, shipbuilding and aerospace technology. It was founded in 1933. Automobile products are divided into practical types (i.e. trucks, minivans and four-wheel drive vehicles), luxury cars and ordinary cars. Mazda is a Japanese automobile manufacturer founded in 1920 and headquartered in Hiroshima, Japan. Mazda has two models: a 5-door hatchback and a 4-door sedan. The length, width and height of the car are 4515mm, 1745mm and 1465mm respectively, and the wheelbase is 2640mm.
19
3
Share

What Are the Causes of Steering Wheel Vibration in Cars?

There are several reasons for steering wheel vibration in cars: 1. It may be caused by tire deformation or issues in the vehicle's drivetrain; 2. Worn or loose ball joints in the tie rods, or detachment of rubber bushings at the joints, etc. Solutions include: 1. Inspect the static balance of the wheels and check for excessive tire deformation—replace if deformed; 2. Have a professional repair shop inspect and replace any damaged components. The steering wheel is typically connected to the steering shaft via splines, and its function is to convert the force applied by the driver on the steering wheel's edge into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel can reduce the hand force required from the driver during steering.
7
4
Share

How to Use Car Turn Signals?

Method for using car turn signals: If turning left or changing lanes to the left, the left turn signal should be activated in advance; if turning right or changing lanes to the right, the right turn signal should be activated in advance. Turn signals are an important lighting system in a car and should be used when turning or changing lanes to alert drivers behind. Failure to activate turn signals before turning or changing lanes can easily lead to accidents. When driving, it is crucial to use turn signals before changing lanes, as this signals drivers in adjacent lanes to slow down and yield. Learning to use turn signals correctly helps improve driving safety. If a vehicle's turn signals malfunction, they should be repaired promptly to avoid compromising driving safety.
4
0
Share

What are the symptoms of a bad steering linkage ball joint?

Symptoms of a bad steering linkage ball joint include: 1. A clicking sound when turning; 2. Feeling a large gap in the steering wheel and unstable direction while driving; 3. In mild cases, it can cause unstable steering, while in severe cases, it can lead to sudden wheel misalignment or detachment, especially at high speeds. The steering linkage is a crucial component in a car's steering mechanism, directly affecting the vehicle's handling stability, driving safety, and tire lifespan. The ball joint of the linkage is a rod with a ball joint housing, where the ball joint of the steering spindle is placed inside the housing. The ball joint is hinged to the edge of the shaft hole of the housing via a ball joint seat at its front end. The needle roller between the ball joint seat and the steering spindle is embedded in the groove of the seat's inner hole surface, which helps reduce ball joint wear and improves the spindle's tensile resistance.
11
2
Share

What Causes the Smell of Gasoline When Starting a Car?

When starting a car, the smell of gasoline is caused by incomplete combustion of fuel. When the car is started while cold, the vehicle's computer will appropriately increase the fuel injection volume based on the intake air temperature and coolant temperature signals. At this time, the engine has not yet reached its normal operating temperature, resulting in poor combustion efficiency. This causes some fuel to be expelled without being fully burned, leading to a strong gasoline smell during cold starts. This situation is particularly common in winter. The normal operating temperature of an engine is between 80 to 90 degrees Celsius. Once the engine reaches this temperature, the vehicle's computer will reduce the fuel injection volume accordingly. Under normal operating temperatures, the fuel will be fully combusted, and the gasoline smell will disappear.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.