What does high fuel tank pressure mean?

1 Answers
DiAmy
07/29/25 7:38pm
High fuel tank pressure occurs when the temperature of gasoline increases during driving, causing slight evaporation. This results in the formation of gasoline vapor inside the tank, leading to increased pressure. It is recommended to use a fuel additive to reduce the pressure. The causes of high fuel tank pressure are as follows: 1. Clogged fuel tank cap regulator valve: High fuel tank pressure may be caused by a clogged fuel tank cap regulator valve, a blocked carbon canister, or a damaged solenoid valve. If the fuel tank cap regulator valve is clogged, it will lead to excessive pressure inside the fuel tank. In this case, the valve should be disassembled and cleaned. 2. Carbon canister blockage: If the fuel tank is overfilled during refueling, some fuel may evaporate and enter the carbon canister, forming particles inside and causing blockage. If the solenoid valve is damaged, the engine's pipeline system cannot properly ventilate, preventing the release of fuel vapor from the fuel tank and causing the internal pressure to rise. 3. Hazards of high fuel tank pressure: Excessive fuel tank pressure can make refueling difficult, as fuel may not enter the tank properly. Moreover, if the fuel tank pressure remains high for a prolonged period, it can cause the tank to deform and may also damage the fuel pump. High fuel tank pressure is a common issue, but it can generally be avoided by regularly cleaning and maintaining the fuel tank and not overfilling it during refueling.
Was this review help?
7
1
Share
More Forum Discussions

What is the passing score for Subject 2 exam?

Subject 2 has a full score of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The exam is considered passed if the following conditions are met: ① For applicants of large buses, tractors, urban buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The exam for small vehicles C1 and C2 includes five mandatory test items: reverse parking, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item, high-speed toll card collection. The exam for large vehicles A1, A2, A3, B1, and B2 includes: pole test, stopping and starting on a slope, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, passing through a limited-width gate, passing through continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. Candidates who fail the Subject 2 exam on the first attempt are allowed one retake. If the retake is not attended or is failed, the exam process is terminated, and the applicant must reschedule the exam after ten days. Within the validity period of the driving skill test permit, the number of rescheduling for Subject 2 and Subject 3 road driving skill exams must not exceed five times. If the fifth rescheduled exam is still failed, the passing scores of other subjects will be invalidated.
16
3
Share

What is the Xiaolaohu vehicle?

Xiaolaohu is a pickup truck under the ZX Auto brand. The ZX Auto Xiaolaohu is built on the Weihu platform, equipped with General Motors' electronically controlled unit pump technology, offering significant noise reduction advantages compared to its peers. The engine is specially tuned by Sida, ensuring better quality and fuel efficiency. Additionally, a professional U.S. NVH team was hired for sound packaging and structural optimization, resulting in even lower noise levels. Below are some driving tips: 1. Check mirrors: Always use turn signals and slow down when turning or changing lanes. Before turning, check the mirrors—left turns require checking the left mirror, right turns the right mirror, and both turns require checking the interior rearview mirror. 2. Avoid fixating on the front: On clear roads, keep your gaze level about 100 meters ahead instead of focusing near the front of the vehicle. 3. Clutch control: When decelerating above 40 km/h, avoid pressing the clutch initially; only press it when speed drops to around 20 km/h. 4. Steering: Turn slowly at high speeds and quickly at low speeds.
2
4
Share

What Does Flooring the Gas Pedal Mean?

Flooring the gas pedal means pressing the accelerator all the way down when driving, as if the pedal were stuck to the floor. This driving style is referred to as "flooring the gas pedal." Below is a detailed explanation of flooring the gas pedal: 1. Impact of Flooring the Gas Pedal: A vehicle's power is closely related to its displacement. The smaller the displacement, the weaker the power output. It's common knowledge that a vehicle's engine typically operates between 2,000 and 4,000 RPM under normal conditions, and it rarely exceeds 3,000 RPM. While pressing the accelerator further can increase the engine's RPM, this is generally not recommended. 2. Fueling Limit: Due to differences in engine models, each vehicle has a maximum RPM limit. Some engines automatically cut off fuel supply at around 5,000 RPM, while others can reach up to approximately 7,000 RPM. At this point, no matter how much you press the accelerator, the engine's RPM cannot increase further, meaning it has reached its maximum limit.
4
2
Share

How Long After Drinking Several Bottles of Beer Can You Drive?

It is recommended to wait for more than 10 hours before driving to ensure that the blood alcohol concentration does not exceed the legal limit. Here are the detailed explanations: 1. Alcohol Content: If the blood alcohol content exceeds 80 milligrams per milliliter, it indicates severe drunk driving, which will result in the revocation of the driver's license and a 5-year ban from retaking the test. 2. Drunk Driving: According to current drunk driving standards, if the traffic police detect a blood alcohol content exceeding 20 milligrams per milliliter, it will be considered drunk driving. Once confirmed, the driver's license will be revoked and suspended for six months. 3. Specific Time: The body's ability to metabolize alcohol after drinking one bottle of beer is relatively weak, and it takes about 9 hours for the alcohol to be completely eliminated. In summary, it is best not to drive within 8 hours after drinking one bottle of beer. To be on the safe side, waiting for more than 10 hours before driving ensures that the blood alcohol concentration does not exceed the legal limit.
17
3
Share

What to Do If You Forget to Bring Your Driver's License When Going Out?

1. Method One: Bring Your ID Card - With an ID card, the driver's license information can be queried through the information on the ID card. 2. Method Two: Check on the App - You can also download the Traffic Management 12123 app on your phone, where you can check your driver's license information. 3. Handling Process: While driving, not carrying your driver's license with you does not mean driving without a license. In such cases, the traffic police will handle it as not bringing the driver's license, not as driving without a license. The traffic police will not detain the car owner but may temporarily impound the vehicle until the owner brings the driver's license to the traffic team to retrieve the car. 4. Note: If you have a C1 driver's license but drive an A1 or B1 vehicle, the traffic police will consider this as driving a vehicle that does not match the permitted vehicle type. The driver will be penalized with a 12-point deduction, and in severe cases, may be detained for up to 15 days.
13
1
Share

How to Deal with High Fuel Consumption in Focus?

High car fuel consumption can be reduced by cleaning engine carbon deposits, checking the oxygen sensor, regularly replacing the three filters, and inspecting the electronic control unit. The combined fuel consumption of the Focus is 5.5-5.9L/100km. There are currently 7 models of the Focus on sale, including the manual Fengyue, automatic Fengchao, and automatic Fengchao, with a combined fuel consumption of 5.5L/100km. The automatic Fengyue and automatic ST-Line have a combined fuel consumption of 5.7L/100km. The automatic ST-Line has a combined fuel consumption of 5.6L/100km. The automatic Liechao has a combined fuel consumption of 5.9L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.7-8.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a major cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a significant amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles with long service life, various faults are inevitable.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.