What does Geely 300t mean?

2 Answers
McQuinn
07/28/25 2:09pm
Geely 300t refers to the Geely Xingyue 300t model, which includes the Tanxingzhe and Yaoxingzhe variants. Taking the 2020 Geely Xingyue Yaoxingzhe as an example, it is a compact 5-door, 5-seat SUV crossover with body dimensions of: length 4605mm, width 1878mm, height 1643mm, and a wheelbase of 2700mm. The 2020 Geely Xingyue Yaoxingzhe is equipped with a 1.5T engine and a 7-speed dual-clutch transmission, delivering a maximum power of 255 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
Was this review help?
14
3
Share
Cecilia
08/11/25 10:22pm
Geely 300t is a naming convention used by Geely Auto to denote engine performance. The '300' indicates that the engine's peak torque is approximately 300 Newton-meters, while the 't' signifies the use of turbocharging technology. This naming style is reminiscent of Volkswagen's 330TSI and BMW's 320i, aiming to give you an immediate understanding of the car's power level. In practical terms, the 300t offers stronger acceleration and faster speeds compared to a standard 1.5T engine, especially when overtaking on highways. However, torque figures can vary depending on specific tuning; for instance, the driving experience between the Xingyue 300t and the Boyue 300t differs. It's advisable to test drive them. After all, specifications are just a reference, and personally, I believe that chassis tuning and transmission matching have a greater impact on the driving experience.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

Under what circumstances is overtaking not allowed when driving a motor vehicle?

Overtaking is not allowed under the following circumstances: 1. When there is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency tasks ahead. 2. When the vehicle ahead is making a left turn, turning around, or overtaking, overtaking is not permitted. 3. When passing through areas with no overtaking conditions, such as railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or sections of urban roads with heavy traffic. Relevant information about overtaking is as follows: 1. After confirming that overtaking is possible, turn on the left turn signal, send an overtaking signal to the vehicle being overtaken, and wait for the vehicle ahead to yield. Maintain a safe distance from the vehicle being overtaken and pass it from the left side. 2. After overtaking, turn on the right turn signal and slowly steer back to the original lane without affecting the normal driving of the overtaken vehicle, then turn off the turn signal.
16
2
Share

What Type of Fuel Does the Wrangler Use?

The Wrangler uses 95 octane gasoline. Below are the specific details about the Jeep Wrangler: 1. Vehicle Positioning: The Jeep Wrangler is positioned as a mid-size SUV, with dimensions of 4334mm in length, 1894mm in width, and 1841mm in height, and a wheelbase of 2459mm. 2. Configuration: It is equipped with rear parking radar, reverse camera, cruise control, off-road driving mode switching, engine start-stop, hill start assist, hill descent control, keyless start system, and more. 3. Suspension: The Wrangler features multi-link independent suspension both in the front and rear, with electronic hydraulic power steering, and a body structure that is non-load-bearing.
3
1
Share

Is it okay to only replace the lowering springs without changing the shock absorbers?

It is not advisable to only replace the lowering springs without changing the shock absorbers. The main reason is that there may be issues with the length, and even if they can be installed, the mismatch between the springs and shock absorbers will result in insufficient comfort. Below is some information about shock absorbers: Introduction: Shock absorbers are used to dampen the oscillations from the springs after absorbing shocks and impacts from the road surface. Application and Function: They are widely used in automobiles to accelerate the attenuation of vibrations in the frame and body, thereby improving the vehicle's ride comfort. Principle: When driving on uneven roads, although the shock-absorbing springs can filter out road vibrations, the springs themselves still undergo reciprocating motion, and the shock absorbers are used to suppress this spring bouncing.
5
0
Share

What does motorcycle electronic control mean?

Motorcycle electronic control refers to the electronic control unit. Below is a relevant introduction about motorcycle electronic control: System Introduction: The closed-loop electronic control carburetor system mainly consists of signal acquisition components such as engine speed, throttle opening (load), oxygen sensor, temperature sensor, etc., a data processing electronic control unit (referred to as ECU), and execution components like electromagnetic control valves. It is a power system that applies the control principles of electronic fuel injection to carburetors, precisely controlling the air-fuel ratio for comprehensive management of motorcycle emissions and performance under China's National III standards. Motorcycle Electronic Control Principle: The principle of motorcycle electronic control is the electronic control unit, also known as ECU (Electrical Control Unit). The ECU converts input signals into digital form, compares and processes them based on stored reference data, calculates output values, and then amplifies the output signals to control several servo adjustment devices.
6
5
Share

How often should a new 7-seater vehicle undergo inspection?

For 7-seater vehicles and models with more than 7 seats, the inspection schedule is as follows: within the first 6 years, inspection is required every 2 years; for vehicles aged 6-15 years, annual inspection is required; for vehicles over 15 years old, inspection is required every 6 months. Non-commercial small and mini passenger vehicles with 7-9 seats within 6 years are included in the exemption from inspection; for non-commercial small and mini passenger vehicles over 6 years but under 10 years, the inspection frequency is adjusted from annual to biennial. The documents required for vehicle annual inspection include: 1. Owner's ID card. 2. Original vehicle license. 3. Valid compulsory traffic insurance policy. 4. Current year's vehicle and vessel tax payment (or exemption) certificate (the vehicle and vessel tax certificate is usually included in the compulsory traffic insurance policy).
8
2
Share

How to Completely Replace Antifreeze?

Completely replacing antifreeze involves draining the old fluid, cleaning the cooling system, removing residual water, and adding new fluid. The detailed method for a complete antifreeze replacement is as follows: Draining the old fluid: Unscrew the radiator cap, open the radiator drain valve (usually located at the bottom of the car), and drain out the old antifreeze. Cleaning the cooling system: Continuously pour clean water into the engine cooling system. During this flushing process, keep the engine idling to maintain water circulation until clean water flows out from the radiator. Removing residual water: Stop adding water, wait until all water has drained out, then close the drain valve. Adding new fluid: Fill with new antifreeze, start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop slightly. Top up with additional antifreeze as needed to reach the full level.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.