What does 'gear' mean on a motorcycle?

1 Answers
CollinAnn
07/29/25 1:28pm
On a motorcycle's instrument panel, 'GEAR' refers to the gear position of the motorcycle. Below are related explanations: 1. GEAR: Essentially, it means gear. By switching gears, the motorcycle can adjust its gear position to operate at maximum power under different road conditions, minimizing unnecessary work by the engine. 2. Turn signal indicators: Usually represented by the English word 'TURN'. The left turn signal (LEFT) is commonly abbreviated as 'L', and the right turn signal (RIGHT) is abbreviated as 'R'. 3. Headlight indicators: Typically represented by the English word 'LIGHTS'. The dimmer is 'DIMMER', high beam is 'HIGH' (abbreviated as 'HI'), low beam is 'LOW' (abbreviated as 'LO'), and the parking light is 'POINT' (abbreviated as 'PO').
Was this review help?
7
0
Share
More Forum Discussions

What is the fuel consumption per 100 kilometers of the Bora?

7.7L/100km. Below is the extended content: The Bora is the first independently designed model by FAW-Volkswagen and is hailed as a new car that "inherits and surpasses the classics." Bora: In 2001, Volkswagen Group's new sedan officially debuted in China under the name "Bora," establishing a strong reputation as the "driver's car" thanks to its dynamic design and advanced technology. Since its launch, the Bora has been highly favored by today's social elites for its dignified and generous appearance, outstanding safety and comfort features, and excellent German manufacturing quality. Its solid, full, and simple yet fashionable wedge-shaped design, coupled with powerful performance, fully satisfies the thrill of driving. The long wheelbase and full-size compact body reflect its rich connotation. The meticulously designed control system allows for effortless and enjoyable driving pleasure. Superior quality, comprehensive and advanced safety features further enable the driver to unleash and control their passion with ease.
15
3
Share

What is the method for replacing the wiper blades on a Buick Excelle?

Buick Excelle wiper blade replacement method: Press down the locking button on the wiper blade, then keep the wiper blade at a 90-degree angle with the wiper arm. Hold the wiper arm and push the wiper blade out. There is no fixed replacement interval for wiper blades on cars. When the wiper blades fail to clean the windshield effectively or produce noise during operation, they should be replaced. The Buick Excelle adopts Buick's new-generation family design language, featuring a refreshed Buick family-style flying-wing grille with dark mesh texture and a high-gloss electroplated shield-shaped outer contour. The car's wing-shaped headlights form a diving angle with the grille, while the dynamic body character lines on the side combine with high-gloss surfaces to create a low-front, high-rear diving posture. The wing-shaped taillights echo the headlights, and the rear spoiler reduces wind resistance while improving handling, resulting in better fuel economy.
20
2
Share

How to Turn on the Warm Air in the Sail?

The warm air in the Sail can be activated simply by increasing the temperature and selecting an appropriate fan speed. When using the air conditioning for heating, there is no need to press the AC button, as the AC button is the cooling switch for the car's air conditioning system. The heating principle of the car's air conditioning is quite straightforward. During heating, the high-temperature coolant from the engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to be emitted from the air conditioning vents. The Sail is a joint-brand model that directly promotes itself as a family car, with dimensions of 3947mm in length, 1690mm in width, and 1503mm in height, and a wheelbase of 2465mm. A wide decorative strip runs across the central air intake grille, with the golden bowtie emblem embedded in it, paired with slightly sharp headlights and a robust front bumper, giving the Sail a sporty vibe reminiscent of the Cruze.
9
1
Share

What Causes the Abnormal Noise When Braking and Releasing in BMW 3 Series?

BMW 3 Series abnormal noise when braking and releasing is generally caused by brake pads. Here is a partial introduction to the abnormal noise when braking and releasing in BMW 3 Series: Causes: For new cars, the brake discs and pads are brand new, so they need to be worn in. During this period, there may be abnormal noises when braking, which can be divided into vibration friction and sharp hissing sounds. These noises will disappear after a few hundred kilometers. In windy or dusty weather: Sand or dust particles may enter between the discs and pads, causing a hissing noise when braking. Solution: If the noise persists for a week or half a month and becomes increasingly louder, it indicates a fault with the brake pads. Otherwise, it may be due to other reasons, and the brake pads should not be mistakenly replaced. If a rattling noise occurs during sudden braking and the brake pedal feels vibrating, this situation can be ignored.
18
5
Share

Is Buick an American or German car?

Buick is an American car brand. Buick has many sedan and SUV models, and many of them have been domestically produced in China. The domestically produced models under Buick include the Verano, Excelle, Enclave, Envision, Regal, and LaCrosse. The LaCrosse is a mid-size sedan under Buick, with a length of 5026 mm, width of 1866 mm, height of 1459 mm, and a wheelbase of 2905 mm. The LaCrosse is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. Both engines are paired with a 9-speed automatic transmission (9AT), which enhances gear-shifting smoothness and fuel economy. The front suspension of the LaCrosse uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
20
0
Share

Why was the BMW 316 discontinued?

316's engine has inherent defects, with issues of oil burning and instability, and high costs. Below is an introduction to the BMW 316i: Exterior: The BMW 316i is basically identical in design to the already available 320i, with the "316i" badge at the rear revealing its identity. Additionally, the new car still adopts a single-sided single-exit exhaust design. In terms of configuration, the new car will be equipped with features such as an electric sunroof, headlight washers, a multifunction steering wheel, and parking sensors. Powertrain: The BMW 316i, produced by BMW Brilliance, is powered by a 1.6-liter twin-scroll single turbocharged engine with the model number N13B16B, slightly different from the 1 Series' 1.6T engine (model number N13B16A). This engine has a maximum output power of 100kW and a peak torque of 220Nm. For the transmission system, the engine is paired with an 8-speed automatic transmission.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.